Scott, Have you tried the Tracker 2 with the newest version of Airmail and the other Winlink programs? Do you have any documentation on it's configuration? ...
I'm in the last stages of assembly and seem to have lost C10 .33uF disc cap as I read it. The local rat shack does not have one either. What can I sub and...
I have installed a 6-pin mini-din connector that I am going to wire up to serial port b to connect the GPS to. Will the Tracker2 output waypoints from received...
I'm trying to run my Tracker2 with UI-View in Kiss mode. Can someone tell me the exact commands I need in the KISS setup file to make it work? I can't seem to...
Hi, I'm trying to interpred the telemetry and found an old post http://groups.yahoo.com/group/opentracker/message/3573 Is this still correct or has it changed...
Is the source code for the firmware available? (And if so, can it be compiled with the "Special Edition" (i.e. free) version of the HC08 CodeWarrior tool...
Hi Scott, What's your rough time line for production units? Secondly I realise your probaly running out of room for more programing on the chip but what are...
Is there a pin with power out on the DB9 port of an Alinco DR-135T radio? That way I don't have to run another line for powering up the Tracker2 board. thanks,...
In summary, my proto B is not responding after I finished building it. What I've done: - using otwincfg I've been able to update the bootloader and firmware -...
Finally I got the time to put aside to work on my Tracker2 Proto B board, and, after 5 hours (split in 2 days), it is now completed. What is the state of LED...
Has anybody had any success with the multiple waypoint issue on the Garmin GPS. eg. test,test 1, test 2, test 3, test 4 etc. The GPS in question is a Garmin...
Scott - what was the command I had to go in and manually change for the T2 to work with the Alinco? I should have wrote it down but I didn't and now I can't...
Hi, I'm about to finish building the OT2 kit and have a question regaring the software. Has the micro already got the bootloader programmed? If not the...
Hi all, I'm trying to use my OT2 as a digipeater and have encountered a strange problem. The OT2 (Build 54076) seems to be sending and receiving O.K., but...
The OT2 can be used as a digipeater? I want to be able to put a digipeater on the air here but the current TNC's are cost prohibitive. Can it be used as an...
Here's something I ran across while searching for information about RadioActive Networks's Anti-Tracker. In addition to that product, I also ran across this: ...
Anyone using their T2 with AGWPE? I'm trying to simplify access to it right now, as I have my Igate and client application on seperate machines and I would...
I have been looking at the schematic and the tracker2-ProtoC.txt file noticed that U6 FM25W256 chip not listed in (.txt) file. As it been volunteerely skipped...
New firmware is up - nothing major in this one, just more tweaks and minor features. Added !DAO! support and DAO command Fixed polarity of PTT input Added...
Scott- Received one of the new batch of Proto C boards and it went together fine. Every thing works as expected except for the "Database error" problem on...
I'm thinking of adding a new digipeater feature - this is something I think I mentioned before, but I've got a better idea now of how I want to do it. The...
Hopefully this won't post twice, I'm resubmitting this via the web, my original message never appeared: I swear, either I am making this more difficult than it...
I don't think it's transmitting. I have a ICOM IC-F3 handheld. I have both the double tx/rx cable and the single. when i add power to the ProtoC board i get...
I'll want to play with the new software as well, but first I have to finish test and programming of my board. I've got it assembled but haven't applied power...
I just posted an update that should fix the issues identified today. Fixed position mode seems to be working now, and you can exit from KISS mode. Just keep...
I have been going crazy trying to get this to work. I'm obviously missing something here, but I have exhausted all of my resources and I'm hoping someone here...
Scott,I put the new build in both T2's(proto C) and when I power on it xmits ok and one time after that then no further. The interval is set for 1800 sec. Any...
