Firstly I must preface the question with the caveat, that I don't know what the firmware version of the tracker2 is, so I must visit the site this week and ...
Some types of digis will insert their own callsign into the digipeated packet one or the other of those ways you spotted. The way either digi type _operates_...
... What hardware/software are you using to view the packets? The asterisk (*) is a visual representation of the has-been-digipeated bit. On the Kantronics...
Hi, I'm trying to interpred the telemetry and found an old post http://groups.yahoo.com/group/opentracker/message/3573 Is this still correct or has it changed...
... Doh! So on the OT2 (below) they are ADC7,6,5 and 5 seems to be floating at 5 Volts, Reading is 24.89C, 13.64 Volts, counter is disabled, no satellites, ...
Sounds right. I'd have to check the code to make sure it's all there and working, but that part was carried straight over from the OpenTracker, only changing...
... Cool, the first two colums seem to be working out ok anyway, whatever about the rest, I'll try and verify visually later on this week. Thanks John ... ...
The extra ADC might be pulling from the wrong channel, I'll have to check. Unfortunately I'm going to have to go pull some files off my backup drive before I...
... Thats really not a problem.. ground them all one by one and it will (hopefully) be found. I'll have to check. ... Sounds like vmware/paralells or something...
Running in a VM's just going to be a pain. More likely I'll just keep it on the workshop computer and run it through terminal services. In fact, I might...
Replying to my own post, I've got a student doing up graphs for me of our local OT2/opentrackers's, but neither of them currently have either the counter...
Seems like my T2 ProtoB is not decoding incoming traffic, even with LOOP jumper installed it can't see its own beacon (thru MONITOR ON command on the...
The loopback has never really worked right due to the lack of low-pass filtering. That's also why the calibrate option was removed. Does the INFO command...
I'm trying to run my Tracker2 with UI-View in Kiss mode. Can someone tell me the exact commands I need in the KISS setup file to make it work? I can't seem to...
I've used one with UI-View with no particular difficulties. I think I just set it up for KISS beforehand, though, and removed everything from the KISS setup...
Scott, Have you tried the Tracker 2 with the newest version of Airmail and the other Winlink programs? Do you have any documentation on it's configuration? ...
Never tried it, and I wouldn't recommend it. The T2 doesn't have a lot of buffer space. I'm working to improve utilization of what it does have (for the TX...
I have installed a 6-pin mini-din connector that I am going to wire up to serial port b to connect the GPS to. Will the Tracker2 output waypoints from received...
Great! Since I have a proto-b, I guess I'll have to install a MAX232 like Jason did here: http://groups.yahoo.com/group/tracker2/message/1259 Just have to...
... Since you're planning ahead (unlike my method :) just change the config byte _before_ you start hacking on the hardware. ... You've got to cut a trace and...
On Wed, 14 Mar 2007 09:03:24 -0500 ... What I am doing for port b is to use a 6-pin mini-din connector. I bought a PC mount type and super-glued it behind the...
I'm in the last stages of assembly and seem to have lost C10 .33uF disc cap as I read it. The local rat shack does not have one either. What can I sub and...
Just about anything. Or possibly nothing. It's the input power filter. If you've got a spare 0.1uF, that'll work. Or a 10uF electrolytic, or whatever. ...
I just installed the T2-135 Build 54085 in a alinco dr-135 MK2. As far as I can tell the TNC is working ok. I am able to connect via serial port and work the...
I'll add a passthrough mode to my to-do list. That could be useful. What does the POSITION command report? Turning AUTOBAUD off can eliminate one potential...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
