Good morning all, I know this isn't pertaining to the topic but will the puxing cable work with the wouxun radio? Does it have the sane pinouts? If this cable...
Allan WD4ITE wrote... ... The Wouxun (KG-UVD1P, KG-UVD3P, KG-UV6D etc.) all use the same "Kenwood" style connectors as the Puxing (PX-777, PX-888 etc.) ...
That's great to know. Thanks for the tip. I will purchase the cable shortly. 73's to all, Allan May,WD4ITE Sent from my iPhone...
13581
joe@...
Feb 1, 2012 5:13 pm
Has anyone yet figured out how to connect a switch for changing profiles to the OT3M? Thanks, Joe N3HGB Also anyone done any scripting yet? It seems to be a...
It's the GPIO line, pin 8 on the terminal block. But I just checked and the internal pull-up wasn't enabled, so you have to connect it to 5v for it to be...
I just soldered up the connectors on my FMI-15 cable, plugged it in to the Nuvi 1490 and T2-135, powered it all up and it works! I told the T2-135 to WAYPOINT...
... You're successfully running Puxing 777's attached to OT2m's as digipeaters ? They must be pretty low profile. The issue he's having is the OT2m decoding...
Just a little update. As some of you suggested that the PX-777 might cause the problem I replaced it with an old Motorola MC Micro. Here's the result: Nuvi 350...
Any chance you've got an oscilloscope to check what the audio level is? I can walk you through checking a few places if you'd like. The trackers are all...
T2s and OT2ms don't use the message-capable datatype in their packets. But APRSISCE/32 will let you send a message (via Message / Send Message) to any station...
... Well, now that the OT3m has LOTS of memory and CPU to play with, we can ask for the world until Scott fills it up! I can already picture him grumbling when...
Actually I have an old oscilloscope collecting dust in the basement. It should be suitable for AF measurements. Please provide some (detailed) instructions on...
Lynn, I'd be very interested to hear how this works out for you. I have been using the Nuvi 350 with the Alinco DR-135T, and it's been great, but the '350 is...
... I've been running 2 Nuvi350s for years now, one in KJ4OVQ-9 (T2-135) and the other in KJ4ERJ-9 (an OT2m). They've been good and I have really enjoyed...
The B port routed to the front is receive-only to the T2-135 only. It provides 5v out for a GPS, ground, and a single data pin for transmit data from the...
13600
Joe Della Barba
joe@...
Feb 4, 2012 1:32 am
The "switch profile on GPS FIX" is backwards. Switching to Profile 2 if GPS is invalid actually ends up doing it when valid and vice versa. Also NO FIX gets...
I have 2 separate OT2m units each set up with their own radios and Garmin 350's. I am able to see call signs of stations all around me but the two units do not...
... What have you done as far as troubleshooting? ... The above will have nothing to do with each unit hearing the other as they within earshot of each other...
hi all it maybe have been a subject here, can the OT2 be used as a Digi? do i need a special version of the firmware? if so which one please? thanks 73 gervais...
Brad KE4YOV wrote... ... It sounds like it is not a radio problem if KE4YOV-9 works OK with the radio that's normally connected to KE4YOV-1. It also sounds ...
Gervais VE2CKN wrote... ... The OT2m makes a dandy digi! http://wiki.argentdata.com/index.php?title=Digipeater_Setup e.g. for a WIDEn-N (up to 3 hops) MYCALL...
