Could the t2-301 be scripted to change frequency using geofence parameters? might be a thought for the t3-301 as well. Thinking on something like a HIBAL...
Not just frequency but path as well. Picture switching to 145.825 and a path of ARISS when you're over the Atlantic... Lynn (D) - KJ4ERJ - Author of APRSISCE...
Yes! I've been pushing this for a while, but I don't know if anyone has used it. You can trigger script actions for rectangular areas defined by corner...
13335
Eric Fort
eric.fort@...
Dec 14, 2011 5:23 am
I figured as much! That said what would be the limit to the number of rectangular areas one could define? a number such as 324 ;)comes to mind as a nice...
Depends on how much space is allocated to scripting. Right now it's 512 bytes, and I'm not sure off the top of my head how efficiently you could write the...
... There's no need for that many! Just a few would be fine. Code space is tight. Tell me what you want and when to change and I'll have a look at a script...
In my frustration of all the issues with my Garmin Nuvi 1300, I decided to bite the bullet and get on Ebay and purchase two used Nuvi 350 so that I could...
P.S. I've read the thread from KI4PSR regarding his factory cable being soldered incorrectly. I don't think that is the issue because my Nuvi 1300 still works...
AFAIK and have seen on the Garmin site, the FMI cable for the Nuvi 350 is unique to that particular model. Other Nuvi cables probably won't work with it. And...
Thanks Scott, I will look into that for a future antenna Here is an update, and maybe an end to this topic: After spending more time looking at the aprs.fi...
... Download a copy of APRSISCE/32 and switch it over the latest development version following instructions on the wiki at http://aprsisce.wikidot.com/ ...
... Hi Lynn, Are you advising me to run APRSISCE/32 in my car? I would have to figure what are my options for hardware as I do not want to use my laptop. For...
I run APRSISCE on an HTC Tilt in my car when I am not running APRSIS32 on my Netbook. The Tilt is used for my daily runs while the Netbook is used for longer...
I am plugging the Mini-B connector into the side connector. It is the Garmin serial cable I purchased from ARGENT. I notice there is a Mini-USB female...
Yes, the proposal was to take the laptop mobile while you are doing the research, not necessarily as a full-time installation. Currently APRSISCE/32 has no...
That would be your problem, the NUVI350 needs to be powered via the back mount connection and the Argent cable (pn Garmin 010-10813-00 Mini-B Data Cable I...
This maybe to simple but I get same error on a different model when I plug in the wrong power. I have a cable for traffic which when use it in a non traffic...
You may find the digi coverage maps on aprs.fi quite useful to debug good coverage zones as well. Note that these maps a based on the number of packets...
Just did the same thing last week... Bought a used Nuvi350 from Ebay and a bare wire USB cable from ArgentData. I finally get it to work, but I discovered one...
I don't see an analog audio input to this thing... has an onboard 1200Bd modem though. Audio output also has .8V DC on it, would have to run it thru a...
Hi Kriss, You wrote: "I don't see an analog audio input" Reply: Could I put an "ADC" between the OT2 "audio out" and the SHX1 "Digital In"? If so what would be...
13359
Tom Tengdin
t3@...
Dec 17, 2011 7:27 pm
Thanks to all for the info. I didn't know APRSdroid had all those options. I will post more after Christmas when I have had a chance to play with the Thrive...
My text is underlined below... ... "Digital In"? If so what would be a good choice for an ADC (i really don't know what resolution etc. would be required)?...
