Guys dose anyone know how much heat a tracker 2 can stand Had it working in my car one day and the next it would not becon. the only difrent is that it sat in...
Regards, -Frank C. On Sep 1, 2010, at 14:32, "Frank C." <fchrist2@...> wrote: I tried updating my settings via OTWINCFG and it failed 2 times. Well I ran...
hi all, Have a problem setting up my OT2m. I have uploaded the config files for the OT2m and my TinyTrack3+ whicih I have used as a base setting but can't get...
I tried using the OT2m with a Motorola GP300. The GP300 and the P110 use the Mic output also for the PTT. I proceeded to set the HT jumper just like it says...
I just looked at my listing on aprs.fi and i see this info with my callsign... power 1W, antenna HAAT 20 ft, gain 1 dBi omni, range 3.2 miles, my question is...
Nuvi models 200W, 250W, 260W, and 7xx subject to overheating batteries http://www.wltx.com/news/story.aspx?storyid=95572&catid=142 -- Wes ... God help those...
After about 2 years of running APRS (DR-135T/T2-135), I just got the message that my location memory is full. Does anybody know a better way to clear out...
In case anyone is interested, tomorrow morning at 8am EDT, as part of a group for the "Hackerspaces in Space" contest ( http://www.workshop88.com/space/ ) I'll...
Has anyone in the group interfaced the Oregon Scientific WMR968 to an OT2? I am looking at putting one in at our new house in Eastern Oregon. Lots of sun...
As I understand it, the +in is actually Vcc, and is powered by any of the 3 inputs(plug, DB9, front panel), and the grounds are common grounds, and the Vout is...
Hello All,, I have a few questions on the T2-135 and DR-135 radio, hope you can please supply some answers.. Does the T2 still receive audio if the volume knob...
Is there a practical way to simply force a beacon when using the T2-135? Sorry if this has been covered but Yahoo's search engine is down. Dave, W6DLF...
A buddy of mine that likes to buy busted stuff on ebay for repair and resale recently bought a Garmin 350 that was listed as not working because it wouldn't...
Hi All: Just wanted to let all know that the tracker2 and 350 Nuvi worked perfectly over the entire summer I drove with it. Nearly 15000 Miles from Boston to...
I've been using an OpenTracker 1+ with a Peet Ultimeter 100 weather station and it's been working great for almost two years. Wanting to have the ability to...
There's a 2008 specification for Item-In-Message (http://www.aprs.org/aprs12/item-in-msg.txt) as a way to send an APRS object directly to an APRS recipient via...
I have a tracker 2 tnc board in alinco dr-135, my question is the antenna is dead on the nuvi 350 gps unit, can i use my puck antenna which is a garmin and...
The Nuvi 350 has an internal/external antenna switch which is prone to failure. My 350 suddenly quit acquiring satellites, so I purchased a $7.49 (with free...
Quick question i have two dr-135 alincos and installed the tracker 2 tnc in both, at which time the dtmf mic no longer programs frequencies etc. Up down...
Thats normal when in data mode, no mic functions & no audio. Take it out of data mode & should be normal again. 73, Murray, ZL1ARL. ... From: Alan To:...
scatman_166 (callsign?) wrote... ... Search the archives for comments I posted about a year and a half ago, and again inn probably the last six months or so....
Scott - re scripting... would there be enough code space for the OT2m / T2-135 and T2-301 to get the time from an attached GPS receiver? Also could the same ...
I have 2 of these that just don't seem to function. The configuration is correct, however, their packets are not being decoded by digi's. They are connected to...
I have encountered an error when I try to set the frequency on a T2-301. After entering SETFREQ 144.390 144.390 at the command line, I receive error. I have...
Has anyone got a couple of old mapping GPS receivers with serial input that they want to trade for current Argent hardware? I want to put some mapping...
I recently tested an Argent T2-301 radio with integrated TNC with a Davis Vantage Pro with the serial weatherlink module on my home weather station and got it...
Many thanks to whoever put the Wiki entry in re scripting. Just tried it out for the first time to add some beacons. Works a treat. Regards de John EI7IG...
Scott, Any update on the balloon radio? TechShopRDU in North Carolina is talking about putting up a balloon ( http://www.techshoprdu.com/node/786 ) and what...
Keith, Could you send me a personal message, I have a few questions about Smart-beaconing that I don't want to take up the groups time with. Regards, -Frank C....