Please forgive the interruption, but there is no support mailing list for the ADS-SR-1 simplex repeater. I recently bought a simplex repeater, and now I am...
I was working with my Tracker2 last night and noticed that it wouldn't digipeat one of my beacons so I was wondering how I might go about troubleshooting it. ...
Ok, with some sleuthing through aprs.fi, I've established: K7RBW - UI-View via TCP, and not very recently K7RBW-1 - APRSIS32 running a non-verified connection...
Hi All I currently have my Nuvi-350 hooked up to my OT2m and it works great. I was wondering if I could split the serial port on the FMI before it gets to the...
Thanks for the detailed and quick reply, Lynn! RE Unverified APRSIS32: This morning I inserted the code from UI-View so it's now on the net (when I'm running...
Just a guess to get you a quick response. The 350 to OT2m is not speaking NMEA, but Garmin GPS protocol. Can the IC-91AD handle that? If so, I'll let others...
Hi Phil, You need NMEA for the IC-91AD and that is not readily available. But... I added a GTRANS to the inside of my OT2 and it works just fine. I added ...
Does AGWPE do deviation measurements? Thanks! Fred _____ From: tracker2@yahoogroups.com [mailto:tracker2@yahoogroups.com] On Behalf Of k7rbw Sent: Thursday,...
The GTRANS will also give these sentences, GPRMC, GPGLL, GPGGA. There are up to 5 that can be sent in the IC-U82. I do not know what the IC-91AD will accept. I...
Cool! I will have to re-visit it! Thanks! Fred _____ From: tracker2@yahoogroups.com [mailto:tracker2@yahoogroups.com] On Behalf Of Lynn W. Deffenbaugh (Mr) ...
Bob K7RBW wrote... ... How is the deviation and TXdelay on the AIO? If you don't have a deviation meter, an experienced ear should be able to tell if it was...
Hi Phil, That is the picture and I made my cable. I am using a Garmin GPS V not the Nuvi 350. But that is not anything to worry/wonder about too much. Both...
I tuned in the deviation using the sound card tuner of AGWPE until I got a clean tone on each frequency. That seems to help a bunch. At least I'm getting about...
Hi guys I have the T2-301 and a peet bros 100 Ultimeter WX staion and would like to know has anyone here got the same setup. I can't get the WX info to the...
Hi Phil, That is the picture and I made my cable. I am using a Garmin GPS V not the Nuvi 350. But that is not anything to wonder about too much. Both receivers...
Has anyone hooked up a LCD to a T2-301? If so can you suply the schematic. Im looking at having a WX staion & an LCD connected to a T2-301 using 12v 7ah...
You should have the Ultimeter in 'complete' mode, the T2 in 'auto' mode, and the baud rates must match. The SETFREQ read-back is a known bug, and it'll be...
I don't think I've ever heard a MT AIO that didn't sound like the TX dev was flat topping on the limiter (WAY too loud). They always have TX delay waaaay too...
Thanks for the tips. I found a later version of the MT AIO config that allows changing the TX Delay and the T2 seems to be repeating it with greater...
I have been assisting a group here implementing multiple T2-135/Alinco DR-135T setups. The is a really neat setup in one package with great potential. They are...
Bob K7RBW wrote... ... When you listen to the transmitted tones, does it sound like the transmit delay is very short? 73 es cul - Keith VE7GDH -- "I may be...
Where are the frequency settings for the T2-301 stored? I know they're in flash somewhere, just wondering if they are on the T2 board or on the FC301. My...
It's stored in the radio's serial EEPROM. You could also probably tap into the channel select DIP switch and change frequencies that way. I wouldn't worry...
I am using the T2 with the Nuvi 350 and am able to receive APRS messages sent to me directly. Is there a way to receive and display messages sent from the...
Not through the nuvi. You could use a computer through a serial splitter to access the second serial port of the OT2. Or adapt a display unit on to the OT2. ...
It's a lot shorter, now. I found the later version of the config program and I lowered the time from 500 mS to 120mS. As was pointed out, shorter, cleaner...
