I was recently presented a question concerning the TT3+ and the USB GPS receivers now available from Microsoft. Any thoughts on this working with the TNC-x?...
G'Day, I'm new to the TNC world and am a bit overwhelmed by the different options of software available and I don't know what I really need. What I want to do...
So I haven't had any replys to my question but I've managed to create a solutions to them and in the process create something that others may find useful when...
Bernard, this is very interesting. Thanks for passing on the information - it's clear that I need to learn something about UDEV :-(. I have been using a...
I have just built a Tnc-x and am try to connect to a local bbs in kiss mode. I find that I have recieve audio and am decoding packets just fine using WinPac,...
The first thing to check is whether R12 is turned all the way down so that no audio is getting out of it. Try setting it about in the middle of it's range....
I think that I have really trashed this. No audio on pin 7 and no continuity between pins 11 and 9. Solder joints look ok to me, but then I am not sure that...
Have had mine for about 2 wks now and love it never seen anything that works as good as this does just the mod is a bit high from nothing to loud needs a...
John, If you have no audio on Pin #7 of the modem chip, you may have a bad xtal. Pin #7 will always have a tone on it even when you are not transmitting. The...
Thanks. I sent it back and John Hansen has tested it and it works fine for him. Very good. At least I put it together correctly. I think the problem is in...
I have built the tnc-x and had John Hansen check it out since I was no getting any transmit audio. I have looked over my cable several times and rebuilt at...
Hi John A flashing Yellow LED means the receiver sent a signal to the TNC-x and it saw SOMETHING. But that doesn't mean the TNC-x was able to decode anything....
use agw packet engine with winpack , so u would use the agw host its the best thing to use barry ... From: John Mathieson To: tnc-x@yahoogroups.com Sent:...
I have a TNC-x running as an APRS Digipeater, at our club Voice repeater site. Has anyone used TNC-x with the XDigi plugin, in a mic-e configuration?...
Guys, can any of you give me some instructions or resources for using the TNC-X (USB) on my linux machine? I'm running Ubuntu 7.04, which recognizes the TNC-X...
G'Day Corby, I've also been using the TNC-X from Linux. I chose the TNC-X because of the USB interface and that it was powered from the USB port. Here are some...
I saw your udev post, but I guess I'm confused, because doesn't it already get set up as /dev/ttyUSB0? Thanks for the reply, hopefully we can get some more...
Hi Corby, The TNC-X is a great device for Linux (and Windows) - don't let your radio club colleagues discourage you :-) I also have a kantronics KPC3+ and...
Wow, thank you much for the informative reply. Yes, I have been running Xastir since I got my ticket in 2005, and it's always the first program I install on...
... Ahhhh.... good question. In theory you would use the packet radio IP address assigned to you by the local amprnet coordinator. If you don't have an...
Hello, I have been using my TNC-X via USB and my desktop computer with UI- View and it has been working great. I decided to try using it with APRS/CE on my...
It sounds to me as if the software is not set up for KISS mode. If you look at the raw incoming data with a program (like a plain vanilla terminal program)...
Yes, my mistake! Thanks for the replies. That one just slipped right by me. I'll have to find another TNC to run this with. Ray ... the ... the ... done. ;-) ...
Greetings. I'm new to the list here and waiting for my TNC-X kit to be delivered. I'll be building the version with the USB interface option so I can easily...
I have the TNC-X as well and can access Telpac nodes with it. To Winlink with the TNC-X you should go with Paclink and AGW packet engine since the TNC-X is...
I'm working troubleshooting a couple of TNC's right now, and I'd like to ask a question about the transmit. On both units, receive works well, but we can't...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
