hi,since the problem started i have now petrol to the spark plugs,but still
wont start,do you know the correct plug gap,it is still showing code 42,the
problem...
hi,checked the fuel pump and i believe thats the problem, it started this morning and i heard the hum of the pump,turn off tried again
but no hum didnt...
... The upper mount bearing sound like they are the problem. I had the same thing happen to my 93 Baron a while back. I have a 95-99 Neon bar installed on my...
Thats telling him Robert, I know people who won spelling contests and had the common sense of a snail....lol! Creativity and common sense is what makes the...
thankyou for all the information i have received,i believe the problem is the fuel pump,if i find there is a break in the feed to the pump,could i rewire from...
hi,can anyone tell me if there is an internal cut off of the fuel pump if the fuel in the tank is low,i have a live feed to the pump but it is not kicking in,i...
On Friday, July 01, 2005 5:03 AM , ... Right, thanks, my thoughts also.. nasty sound.. ... Well, don't need to do high speed handling, but would like to feel ...
thanks for that,thought as much,cheers ... From: thechryslerlebaronclub@yahoogroups.com Date: 07/01/05 18:56:17 To: thechryslerlebaronclub@yahoogroups.com ...
cheers joe ... From: thechryslerlebaronclub@yahoogroups.com Date: 07/01/05 19:28:59 To: thechryslerlebaronclub@yahoogroups.com Subject: [The Chrysler LeBaron...
I want to take my heater box out this weekend, cause I bought a new factory core to replace the aftermarket one I bought two years ago (it was crap in my...
Damn, why do these things always come up 3000 miles away? My car has a near new turbo, tight motor, decent tranny, good stereo, near new convertible top,...
After all the posts on this subject lately and the wild claims for humongous mpg as well as those few sorry people who would get better mileage in a Hummer I...
there are 4 bolts. One in each corner. ... From: "gene" <genej50@...> To: <thechryslerlebaronclub@yahoogroups.com> Sent: Saturday, July 02, 2005 5:11 AM...
Gene, Move the seat forward on it's track, and that should expose the (2) back bolts. ... __________________________________ Discover Yahoo! Stay in touch with...
Gene, Do you have the seat all the way forward? The 2 LeBarons I've worked on ('92 & '93) both have 4 bolts in the front and another 2 in the back. Push the...
i have tested the wires to my fuel pump,when i turn ignition on there is no live to pump,it does not hum,but when i crank the engine there is a live,the pump...
the back one goes the engine and the other justs hangs there right ,there is a top and bottom one can`t remember how they go back on i think i got one right....
If it is the driver's power seat, there is a bolt at the end of each rail in the back but very hard to get at. I found that removing the seat from the frame...
not removing it from the floor. Just the seat. 4 bolts. ... From: "Joe Mehalshick" <jmehalshick@...> To: <thechryslerlebaronclub@yahoogroups.com> Sent:...
... The pump is old and the shaft bushings are worn and/or sticky. Replace it and it's good to go for another long time of happy driving. :) It will be total...
... wrote: <clip> ... NASA hopes that the periodic comet Tempel 1 will run over an 820 pound probe on July 4th. Why? So the craft following the probe can study...
thanks for the great response to my previous questions,but i cant seem to locate the egr,the car is a 2.2 turbo f reg,can anyone enlighten me it would be much...
That will take the seat off the frame. Then you can get at the frame bolts easier. Otherwise if you move the seat all the way forward and tilt the back all the...
