I am looking for an engine pully for a bolens 1220 part #1716-592 it is item 105 in the part list book. Please let me know about availabilty for this part....
i own a 1963 800. the drive and pto belts need to be replaced. do i have to remove the drive shaft and the clutch assembly to do this? i've never changed the...
Hi R. Greene The 800's under a tarp but shopuld be the same as the 850 and the change is pretty much as follows. 1. Using a pipe wrench on the drive shaft,...
bob, thank you for the great instructions on the belt changes. maybe you can answer these questions? i purchesed 2 belts;(gates). the manual calls for a...
Hi Again OK, here goes ?? (1) Belts Generaly, if it fits , use it! Better Belts ($20=30) last longer, cheap ones ($8-15) usually go a full summer or so. Some...
I bought a property that came with an old G12 left in the barn. It has a plow blade attachment on the front, but I'm wondering, are there standard mower...
Well Herby, good scoop! There is a myriad of attachments out there. They come up on EBay regularly. Unfortunately, biggest deck you hang under that machine is...
What about some kind of attachment towed behind like I have seen larger tractors use? Sorry I'm a bit of a mowing novice, previously grass to me was grazing...
Herbie, check the Bolens Classifieds, there is a G12 deck going cheap! As for towing a deck, sure. Bolens didn't make one, but the are aftermarket units...
Herbie, you might want to also sign up for "bolenstractorsclub". It gets way more traffic. I can send you a scan of the brochure of what attachments were...
Hey Rick, Is that the other yahoo group? I signed up for them both, but only seem to get email from this one though both are set to give me daily digests. I...
Hi Herbie, I think you will find the 42" deck is pretty skukum. I don't think you can compare a Craftsman unit to a Bolens. They are not even in the same...
i have a wisconsin model AEHD, serial #479142. it is on my 1963 bolens 800. i've had an on going carb. problem. the engine is crank start. she'll fire once,...
Hey, This new place of mine gets more interesting, like I said I found an old G12 in the barn with a blade on the front, well I noticed a Bolens nameplate at...
Hi Herbie, 18423 is a 42in Mower Attachment. I can scan the parts list for you if you want. email me at... art @ simpletractors dot com ... found ... today, ...
Hi There.. Here's something to try. Put a fuel shut-off valve in in the line, right at the carb. Turn the gas on for a few seconds to fill the float bowl and...
hey, thanks for the tip. if i could get the engine running more than just firing once, that would be great. i mean i've squirted gas into the cylinder,...
Hi There Again. in order of questions.. 1. The float its self usually moves freely and means nothing.. A. take float out and shake it, hear any thing? if you...
bob, thanks again. before i continue i must say that you are very thorough and detailed in your responses. teacher? anyway, i do appreciate your answers. i...
Hi R.Green back again - teacher? hum.. I guess, 32 years with the Ohio State University system- research & teaching - should qualify me as handicaped! retired...
Can anyone tell me why my fuel pump on my 1250 with a s12-d motor is leaking motor oil out of the fuel pump ?? I do remember someone else here or another...
Hi people, I have a G-14 serial #:0201832 that the clutch will not release. I have dissembled the clutch and everything looks fine. It appears that the front...
When selling tractors or parts through the Internet, do NOT accept Cashiers Checks for more than the price of your equipment, handling and shipping. Scam...
HEY EVERYBODY. I had this emailed to me because I am a subscriber of a site I'd rather not mention here. It might be considered SPAM. See the message as sent...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
