All rope comes with one other requirement... new sheaves in the masthead. http://www.tanzer22.org/2104/rigging/mast/ The question becomes is it worth it. I...
The folks at my club like to raise or lower my mast using an extension of the spinnaker halyard with someone on the end a way down the dock. They say this...
Jan, At the risk of boring others with a repeat of an earlier post, let me direct you to my analysis of shroud stretching issues for a T22 and photos of the...
Here's the information I have on the Springs I use. 5-1/2" Hobby Horse Extender Spring mfd. by PrimeLine P/N SP-9625 Available @ Lowe's, Ace Hardware, etc. ...
Rocking horse springs are as if made for this particular task. Don Sayles T22 320 Great Sacandaga Lake NY ________________________________ From: Midnight...
Does anyone with a T25 (not the 7.5) and a Yanmar IB know if the step immediately over the engine can be slid out? It looks like it does, but I am hesitant to...
Bill, i read the analysis, even though i've read 572 emails on stepping 22, 7.5, 26 masts. Lot of thinking went into that. We occasionally put the mast up on...
I have a Tanzer 25 with an outboard. The engine compartment on my boat is all glassed in except for the front steps that can be lifted off. The step over where...
... I've given some thought to a different table arrangement, but never came up with a better idea that didn't involve major tear out and construction. Kent ...
Thanks for your response. The IB implementation is different in that the step on the top of the "engine room" is teak plywood extending into the quarter berth....
Inboards. They live in a tight box, with only one path for removal, in and out of the cutout revealed when the stairs are lifted. Access is just enough to do...
Owen's observation of the space in a T-29 is correct. It presented a challenge to remove the Volvo 1205 engine and transmission and replace them. It didn't...
Thanks all for the suggestions for stepping/unstepping the mast and the great pics on halyard sheaves. I'm seriously considering all rope halyards with new...
See here : 27 feet However, I am aware a 'few' were built with a higher mast, akin to the T26, and sold. Hope this helps ... [Non-text portions of this message...
Andre: The perfect answer. It was I thought one should do, except better! and even with an exact file link... I now don't have to worry, the torch has been...
Compare these two spec pages; it looks like they yield different numbers. I will have my mast down next month on my 7.5 and will measure it and post results. ...
Hi, I spoke to a sell representative at Mauri Sails (www.maurisails.com). They would be ready to give us a discount around 10% if we buy 3 sails or more. He...
Well my mast is down and on the land tommorow I will measure it and let you know Cause I have to buy a line for my spi for the next season comming soon 2...
Tall rig vs. standard rig? centerboard vs. fix keel rig? unless its not possible, its always better to measure your own mast. Just too many variables. Nothing...
... My supoor maintenance, is any suggestion is to ask your insurance company for their preferred list. And of course use an insurance company that has real...
How old is the boat? Sent wirelessly from my BlackBerry device on the Bell network. Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell....
The top step on the Tanzer-built T25 does indeed pull out (with a little effort). The limiting factor was the fact that the builder drilled through the glass...
Hi, Â Â appreciate your leg work here, but 10% is like a standard off-season discount. I would have thought we could get more. NMÂ T-26 # 838 ... From:...
The prices seem resonable though... I was quoted more at other sail makers Tanzer 26 sails: http://www.maurisails.com/category/Sails-For-Tanzer-26.html Even...
