I'm also considering replacing the mainsheet traveler on my t-26, but haven't yet done a lot more than "thinking"............ The only thing I'm positive ...
I bought a new style rudder from Idasailor and noticed that it is 12-16 (30cm to 40cm) inches longer then the old style rudder.? I have a center board T-22.?...
DJWeir@...
Dec 1, 2008 3:42 pm
40230
I have a cb keel and I use the old rudder. It's 54" long. That's what Ken from Tanzer Boat Parts said it should be for the cb model. I asked him what they...
Thanks, does anybody have an idea on how I would cut it down? Don Weir ... From: susiesherman@... To: tanzer@yahoogroups.com Sent: Mon, 1 Dec 2008 10:46 am...
DJWeir@...
Dec 1, 2008 4:28 pm
40232
hi don I too have the ida sailor rudder on my tanzer 26 lady bug,this summer after about 1200 miles on the water:) I found that my rudder was grounding first...
marc,? thanks for the suggestion. ... From: Marc Cormier <ve9yj@...> To: tanzer@yahoogroups.com Sent: Mon, 1 Dec 2008 12:30 pm Subject: Re: [tanzer]...
DJWeir@...
Dec 1, 2008 6:14 pm
40234
The rudder I supply for the center board model is shortened at the factory , exactly how this is done I'm not sure. Being fiberglass with a foam core I assume...
Ken, Exactly my concern.? Thank you for the information. Don Weir T-22 #460 ... From: hodgson_ken <kch@...> To: tanzer@yahoogroups.com Sent: Mon, 1...
DJWeir@...
Dec 1, 2008 9:43 pm
40236
Hello, I am a new Tanzer 22 owner. My first boat:) The four bolts connecting the gooseneck to the boom were very loose, I was able to tighten the top two...
Hi and Welcome Aboard, Mark I wasnt positively sure that I know what you're referring to, but perhaps this will help in some way. I just posted a New Photo I...
Hi Steve, both Nissan & Yamaha are good motors. Sounds like you have the same motor I use on my T26. The last three years I simply leave it on the boat all...
Hi Wayne: That's a good point about gas mileage and the not having to carry an extra tank with the 4 stroke. I think I'll end up with the Nissan 6 HP 4 stroke....
I use one of the pulleys attached to the taberbacle. It works well enough in light air. I only fly the spinnaker in light air since I am usually alone. I have...
Good morning folks: When I transported my sails from the boat to home a couple of weeks ago, I had the misfortune of a tipped over gasoline tank in the...
Thom, WOW! I just looked at your photo album. Awesome job restoring your T22. It looks great! You must be very happy and satisfied by rescuing a boat from...
Installed a harken windward sheeting traveller two seasons ago, some of the best money I've spent on our 7.5. makes sailing esp singlehanding much easier ... ...
Bought an new Tohatsu (Nissan) 6hp 4 stroke at the beginning of last season. Impressed with 1) fuel mileage 2) now blue smoke 3) idle once I get it running Not...
Does anyone have any pictures of how the original motor mount for a Tanzer 22 should look like when it is completly assembled. I think the previous owner took...
Does anyone have any pictures of how the original motor mount for a Tanzer 22 should look like when it is completly assembled. I think the previous owner took...
Tom I have used a company called Sailcare in Ford PA to clean my sails. They come out looking much better than going in. You might want to check with them and...
Hello everyone, I have been off-line for a while, but its winter and time to do some upgrades. I own a 7.5 Tanzer and I have it on the hard in Bronte. I am in...
When the original dealer ordered your boat from one of three factories, they may or may not have ticked the optional extra box next to motor mount. The factory...
See Michael's website - link below. You may not know if the mount was original to the boat, or a newer install - Fulton is one of the larger manufacturers of...
Thanks Moby. I can't wait to get it back in the water. The painting is going slow (by the boatyard). You all have been so very helpful in all the ideas,...
http://ph.groups.yahoo.com/group/tanzer/photos/view/fef6?b=1 The link has a picture of one side of the aft bilge crack. The cracks run on both sides of the ...
That's a bit sobering, Bruce, since perhaps nothing is more aggravating about an outboard than difficult starting. I suppose i could buy an electric start...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
