My clearance sale of SP-1/Upgrade kits is now over. The last two kits sold today to overseas buyers. I still have three SP-1 kits left (at $122.50), but these...
Hi all, My clearance sale for the SP-1 (at $122.50), and the combination SP-1/SP-2 Upgrade kit ($195), is nearly over. As of this moment, I'm down to only two ...
I just noticed an error in my instructions from a few days ago about how to tell which pin is which on the 8-pin mic jacks. I said that one starts counting...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the stationpro group. File : /Tips for...
Hi Everybody, As many of you know I've been clearing out my inventory of SP-1s by combining them with an upgrade kit which converts the SP-1 to an SP-2. These ...
Most builders have had no trouble wiring up the 8-pin microphone jacks on the SP-1 and SP-2 front panel. However, a few builders have miswired the jacks and...
Hi All, Many StationPro owners use SteppIR antennas, and a number of builders have asked me whether it is possible to use the N8LP SteppIR tuning relay with ...
I completed my StationPro II and one pod (so far) for the Elecraft K3. Problem 1: The AMP Relay jacks(at least to amps 1 & 2 which are connected) do not key....
Hi Jim, Thank you again for your hospitality last Sunday! It was definitely the highlight of my week. My relay box is done and I have worked on my pod pin out...
I am currently building a StationPro II kit. The construction documents call for a BS2-IC Basic Stamp. I already have a BS2e-IC Basic Stamp in my possession,...
Just starting to put together a StationPro II, and am trying to work out how to handle the microphones. I have a Drake T4XC, an IC-765 with the SM-20, and a...
In May I bought a StationPro II Kit and obtained all parts from Mouser. No assembly has been started. I have decided to simplify my station to manage it and...
Does anyone have  Station Pro II  POD layouts for a FT1000D or a FT897D? If so please email me directly or post it on the group. Thanks in advance...
Hi everybody, I forgot to include the PCB network enclosure template in the StationPro Network Assembly manual. I've now included the template as the last page...
Hi everybody, This email is intended for folks who have purchased or intend to purchase an SP-1 or an SP-1/SP-UP (which is the SP-1 plus the SP-2 upgrade...
Two recent messages are obviously spam. I inadvisedly clicked the link. Exercise caution, particularly with messages that have no subject line. 73 John...
Hi everybody, I've decided to discontinue my SP-I kits and am holding a fire sale to clear out my remaining inventory. Until they're all gone, you can buy an...
As you can see in the previous posts, I needed a secondary antenna switch to have my SDR-IQ panadapter follow the radios. I realized that the "Station Select...
I have a Station Pro II that I built about a year and a half ago. Both mic connectors are wired for Yaesu. Reason for selling - downsizing to one amp and one...
Jim, I briefly discussed this problem with you in Dayton in 2011 but at that time I have not quite thought the problem through. I am only getting to...
Well tonight I got home and was putting the order together for the StationPro II. Rereading the order before checking out and another part on back order. Can I...
Jim, I am assembling the board with the replacement RJ45 from MOuser - 571-6116202-1. It creates a very tight fit with the plastic feet so I shaved those a...
I spend my time working on boatanchors so assembling the SPII is kind of new tech for me hihi. For the IC's on the microcontroller board like the dual decoder...
How have people notched their main pcb rear corners? I scored through the copper plane with razor knife and then broke the blades tips on my Xcelite wire...
Hi everybody, If you've not yet ordered parts for your StationPros, today (5/29/12) I've updated the Mouser order forms for the SP-I and the SP-II, to...
