I thought this might interest some people here, a draw bar 5C closer for the 10K on Ebay. Item# 150377791718 10K-5C Collet Setup I have no financial interest...
3263
davesmith1800
Oct 6, 2009 3:03 pm
This works Use a drill chuck in the spinled this will work with shafs from 0.0135" to 1" diameter I have even on the internet found drill chuck as small as 0...
3264
boxford72
Oct 6, 2009 9:17 pm
Hello all, I am a new member who is in the process of buying a Boxford CUD. I am a hobby/enthusiast user and intend to use the lathe to help me with my VW...
3265
Jim B.
eeengineer1
Oct 6, 2009 9:37 pm
Don’t go too cheep on the drill chuck. You get what you pay for. Better to find a used Jacobs on eBay than some off brand that will not be concentric. I...
3266
Jim B.
eeengineer1
Oct 6, 2009 10:32 pm
One other thing. You will need a GOOD center, for supporting longish work. Do not be tempted to buy a cheepie. Look at the specifications. If the runout is not...
3267
Wayne Evans
elewayne
Oct 6, 2009 11:22 pm
You're going to fine you will need a lot more than that. chucks, colletts, centers, drills, countersinks,measuring tools, etc etc. The list will keep growing...
3268
davesmith1800
Oct 7, 2009 4:40 am
List have is good to start as what making will determine the tooling you need. Also add HS tool bits I have 100's of Carbide bits and inserts and most time I...
3269
VTatlasLathe@...
dkenney2002
Oct 7, 2009 3:10 pm
I have never seen a 10K turret tailstock for sale. Ocasionaly I see turrets available for the 9". I was wondering if it would be reasonable to convert one to...
3270
Bob Wright
aametalmaster
Oct 7, 2009 3:53 pm
I don't see why it can't be done with some thought full engineering...Bob...
3271
Danny
dperry202000
Oct 7, 2009 3:54 pm
Yes you can add a 3/8" spacer which I had specially made in a machine shop. It worked great but it was not worth it. Also recently I found some one selling...
3272
VTatlasLathe@...
dkenney2002
Oct 7, 2009 4:44 pm
In a message dated 10/7/2009 11:55:54 AM Eastern Standard Time, ... Danny, Why wasn't it worth it? Is the 9" turret tailstock a decent design? I have a...
3273
Darrell Coble
darrell.coble
Oct 7, 2009 4:54 pm
Help me understand why it isn't 1/2 inch difference? Thanks, Darrell ... From: Danny To: southbend10k@yahoogroups.com Sent: Wednesday, October 07, 2009 9:54 AM...
3274
Jim B.
eeengineer1
Oct 7, 2009 4:59 pm
The swing on the 9” lathe is 9 ¼” not 9”. The swing on a 10” lathe is 10” exactly. Difference is ¾ but this means that the spindle center distance...
3275
Darrell Coble
darrell.coble
Oct 7, 2009 5:12 pm
Thanks, I never knew the 9 inch number as I have a 10K and it is 10 so was confused! Thanks again. Darrell ... From: Jim B. To: southbend10k@yahoogroups.com ...
3276
Simon
boxford72
Oct 7, 2009 5:34 pm
Cheers for all the good advice, I forgot to mention I am from accross the pond (UK)! I expect to be buying a tool setup over time but want to start with the...
3277
Jim B.
eeengineer1
Oct 7, 2009 5:47 pm
I just recently posted the SB pamphlet on tool grinding on the Southbendmanual group. ...
3278
Jim B.
eeengineer1
Oct 7, 2009 6:21 pm
I would also suggest that an analog dial indicator is well worth the investment. It need not be expensive. I think you will get more use out this than a...
3279
Danny
dperry202000
Oct 7, 2009 6:36 pm
It cost me around $200 to have it made. Even though it worked perfectly I ended buying a 10K turret on eBay Danny ... From: VTatlasLathe@... To:...
3280
tjwal
Oct 7, 2009 6:36 pm
Sherline also has good instruction for grinding a lathe bit http://www.sherline.com/grinding.htm A working link to Jim's file is ...
3281
Danny
dperry202000
Oct 7, 2009 6:39 pm
I did a lot of measuring and I looked at the specs for both lathes. It you do the math you will find that it is 3/8" not 1/2 . ... From: Darrell Coble To:...
3282
davesmith1800
Oct 7, 2009 7:01 pm
You will find the 10K lathe is only a raised 9" lathe. I think the south bend did this just to sell to schools back the 50's Dave...
3283
Craig Donges
windmillguyi...
Oct 7, 2009 9:25 pm
I have an Enco 10K turret for sale $200.00, if anyone is interested. Craig Donges 330.502.0066 ... From: davesmith1800 <homessearch@...> Subject:...
3284
southbend10k@yahoogro...
Oct 8, 2009 2:33 am
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the southbend10k group. File :...
3286
Shang Hyd
shanghyd
Oct 8, 2009 2:27 pm
I'm cleaning out some stuff that I don't have a use for. I have 3 tool holders but I don't know what toolpost they fit. The measurements are attached. There...
3288
Craig Donges
windmillguyi...
Oct 9, 2009 1:09 am
Greetings all; I have a nice 10K South Bend for sale. 54" hard bed. Taper attachment. Dated about 1984, this is the smoothest running South Bend I've ever had...
3289
Bob Wright
aametalmaster
Oct 9, 2009 4:42 am
Well it worked...Bob...
3290
davesmith1800
Oct 9, 2009 4:12 pm
any photos Dave...
3291
Chuck
scallion172
Oct 10, 2009 2:53 pm
Anyone have any experience with cutting dovetails using the lathe?...
3292
Bob Wright
aametalmaster
Oct 10, 2009 3:29 pm
I could do them but my 10K has an MLA tee slot cross slide so its a little easier holding the parts. What are you trying to do???...Bob...
3293
davesmith1800
Oct 10, 2009 3:49 pm
Can you post a drawing or photo of your part Dave...
