0.69uH: 16T/2x8T bifilar #30 on T25-6 (yellow) 9" (top) Is that a 16 Turn primary of #30 9"long with a 8 Turn bifiler #30 that will also be 8" On a Yellow...
I searched archives unsuccessfully, but guess I guess I am not using the correct search terms. I am looking for a list, that I have seen posted periodically on...
Wise Hams... I just finished my Softrock TXRX, the rx works like a champ on both my HP and Intel computers. However I have 2 PCs with on board audio on both...
I I have a plan for a pa amp. It calls for two 16 to 1 transformers. I found some but they look very small, square and have 3 leads to mount on PC board? No...
Here is an interesting way of packaging the external LPF's Tony supplies with the rigs. On the left is a finished filter, top center is the 80 meter filter...
I am using an V6.3 RXTX and wondering what type of microphone people are using and what type is most effective. I know my Icom IC746PRO mike does not work...
Hey group, Finished my ensemble RX II. What a fun kit to build. I was wondering how to use it to monitor my own signal from my Yaesu FT857d (or any other...
Paul, I found that if I used the software to generate the tone the transmit shift was correct. The trick is to get the software to process the mic input and ...
Just finished the final section on my RXTX Ensemble and I have some out of range measurements. I ran the tests suggested and detailed by G4ZFQ for the BS170's...
Any one had this? Receive works perfectly but I am transmitting on upper and lower sideband at the same time. I have changed sound cards and confirmed that the...
Is it true that no one has ever built a GNU Radio source or sink block for the Softrock Ensemble Rx or RxTx? It would only be an audio source/sink with access...
Hi Guys, This is probably down to my lack of intelligence. I am trying to test my Peaberry RX. To do this I installed the correct drivers, then HDSDR. I copied...
This is my first build of a Softrock RXTX. All tests up until Driver/PA section were within parameters as outlined in building plans. Have checked and...
I am currently building an Ensemble RX II (nice kit BTW) I would like to see a RX/TX version for all of HF. Is there currently anything coming up for that? ...
Today I uploaded an article on the construction of a Panadaptor for the Kenwood TS-570 in the Files section of the Yahoo Kenwood TS-570 Newsgroup. For those...
After corrupting a working installation of my RX Ensemble II, I finally got the drivers to successfully re install AND point to the right hardware i.e. LibUSB...
Hi all Anyone got SoftRock RXTX Ensemble Transceiver for sale? , it would be great if it covered 40/30/20m looking at using these as a club project so want to...
Hi All, Is there a drawing of the KM5H case showing the Ensemble TXRX in its mounted position ? I am trying to ensure that any modification I offer to the...
My little 80/40m RXTX transceiver all of a sudden won't switch to transmit. I press the transmit switch and it keeps on receiving -- no output. Any ideas on...
Get Ready for the first Triathlon DX Contest at Saturday, 2/2/2013 RTTY, SSB and CW in a single contest!!! A big surprise award!!! Team contesting and many...
Hi All, Following on from my 160 Metre QRO posting, I recently decided to complete an in depth study of the Ensemble TX design and operation, the prime...
I am looking for a 1 to 30 MHz (CW, SSB, AM, FM) SDR kit, or a wired, tested and enclosed unit, that includes the extra's such as the LCD Display, USB, Audio...
I have found that the following paragraph has the logic reversed, and that the parallel pattern would be the desired way to install these jumpers. "When...
Am looking for the Parallel to USB Adapter that Flex Radio made for the SDR-1000 a number of years ago. I have a Softrock Assy along with the Flex SDR-1000...
All I'm building my RXTX Ensemble on 40/30/20. I noticed my op-amp tests were wrong with the outputs at 0 and 5 volts. If I go to transmit, then they seem...
Hello, I am puzzled at the problem that I have. I finished the assembly of the local oscillator section and I plugged the board into the computer after I...
I was thinking about building an external 40M LPF in a box. Then I had the thought that I could also put an 80M LPF in the same box. Using a 3PST switch to...
