Uh Oh! I soldered the 8 pin din in place for u04 and u05 instead of for u01. At this point I think it may be easier to get another 8 pin din socket, if needed....
I have come across an old article by VK6VZ discussing how to use a softrock40 as a bandscope for an FT-1000MP. However the article is a bit limited on how to...
Until this week, this combination worked perfectly. Now, I cannot tune the LO with the mouse wheel. I can tune the "tune" frequency with it. I can switch from...
Hi Ignore my previos about sound card input. Woth the seperate sound card I get about 20db gain in noise on 96khz sample rate as opposed to 48khz sample rate !...
I have spent the better part of a week's worth of free time looking at the benefits to matching the RXTX BS170s as suggested often here. I have a drawer full...
Dear All, I have a FA-SDR kit which uses, I believe, an ATTINY45 as the USB-I2C interface. When I probe the USB ports using either the system profiler or USB...
I have a W7PUA DSP-10 kit with extras excess to my needs. Email off list if you're interested. This is a new kit, only inventoried the parts. Thanks, Ron K0IDT...
I am really new to SDR and find myself not understanding some things. I am using Tony's Ensemble II receiver (the built version). Windows 7 64 bit, Realtek...
Well, I've been enjoying listening to my Ensemble II but am still very frustrated by my inability to achieve VFO tuning from any program except CFGSR. Now that...
I have two SDR-3. One playing on one computer and the other on the other computer. I have done this to experiment with some mods. In looking at the two...
I am having some issues with setting up powersdr-IF and or HDSDR. The signals are coming in no problem. The problem is they are exactly 3200 hz off. Now I...
Don’t know why, but at one point I had to go into CFGSR calibrate panel, and set actual freq to displayed freq. I had exactly a 12.5kc offset, i.e. displayed...
... There are BNC to SO239 adaptors available. OR Make up a coax lead that has a BNC plug on one end and a SO239 on the other end. OR Wire the coax direct to...
HI to the group After a hiatus I am back at the sdr once again. I was thinking of replacing the bnc connector on the Ensemble with an SO-239 bolted to the KM5H...
I sent this note to Alex of DX Atlas, but also thought someone here has already figured this out, can anyone help ? Paul K2DB Is there any way that skimmer...
I've been running Powersdr-iq for several months now with the Softrock RXTX Ensemble with great results. Just today I started getting and error "Unanticipated...
... Subject: [softrock40] Ensemble RXTX 40-30-20 won't transmit ... tuning from 40-20m. I tried PSDR but it has too many knobs ... Chris, Unfortunately the...
Hi, Here is the latest version of PowerSDR application that can be used from the homebrew SDR users for rigs compatible with the USB ATTiny DG8SAQ/PE0GKO...
First let me say how happy I am with the kit and the service. It arrived in no time, it was all there and seems to be very good quality. Having finished the...
Hi, I just uploaded some filter designs I did for the Softrock Ensemble II with the LF option. These should be improvements over the third-order filters that...
I have a nice Ensemble 40-20 RxTx that is not getting used. I only have a laptop and so can't really use it to transmit since I only have one sound card. I...
Just started assembly and finished the power supply stage and started the 1st test. I end up the a reading of 4.92k ohms. I've viewed my work thru a...
I have been testing different software soultions for my SoftRock RX Ensemble II, and so far, i prefere PowerSDR-iq. Is there any way to remove the 12 k peak...
I came across this Creative Sound Blaster X-Fi Surround 5.1 Pro, one of the few that has a separate mic in and line in. They claim the output is 24/96khz, but...
Hi, Got the Ensemble II Receiver and HDSDR, powered it up, installed the driver, then installed HDSDR. Went through the start up steps in the document... The...
Inspired by the recent thread discussion on how to receive with this set up and an Ensemble RX I was wondering if anyone could tell me how to set up to...
29/11/2012 12:21 I was listening to a "Chat with the designers" podcast last night about trouble shooting the Softrock SDR kits. It mentioned a CD being given...
I can currently run 40-10M with softrocks. Long/short: I may have a really, really long, high longwire soon. How much action could I expect to get on 80 or...
Hi all, I've seen one other posting asking this question but with no replies. A few others where it's hinted that a Signalink USB "might" work but nothing...
