Oh ... a ground loop .... I inserted a Radio Shack audio isolator in the IQ out line and all was well again. I use one with the SDR1000 and had aimed to try...
I just posted a corrected BOM for the RLC_Meter. The old BOM had a wrong part number for the TC7660(it was for the soic rather than the DIP). Dave - WB6DHW ...
Hi Art, 1)Does the kit include the PCB and the Si570 or we need to order these separately? 2)What is the expected DX price for the kit? (Dave's BOM says...
Good Morning All, Thus far this week forty v9.0 Lite+USB Xtall kits have been shipped as well as a few SoftRock Lite kits and USB I2C interface kits. I hope...
The Group Buy for the UHF SDR (beta) is open and kits to populate the PCB are still available. Dave expects the boards from the PCB vendor to arrive on...
There has been too many post to be able to find the answer. I have searched the post bur get lost in all the side issues..... What 192K sound cards work with...
This is just to report that my upgraded 20 Lite 6.2 works well (even with a 12ft dipole wrapped around a balcony) and that I did not have any trouble during...
Dear All, The USB to I2C support is here with the PowerSDR-IQ 1.12.02. This new version has the USB to I2C interface supported since many have requested it, so...
Dear Friends I just connected RxTxv6.3 & USB_I2C and finally PowerSDR I/Qv1.12.02.Everything looks good even more.Great receiving on 80m SSB and CW.(till now...
I've just downladed and installed Rocky 3.6. Can someone pse point me to a wav file that I can use to become familar with it? I looked thru the files section...
I've spent all day trying to get his system running..... Rocky is OK but cannot get a signal into power sdr. I'v now loaded 1.12 and everything seems to point...
I would like to be able to use the Xverter feature with my Ver6.2RxTx XtallV1.1 10meter Softrock and 2m transverter. What I would like to do is select the...
I have a 3.8cycles per second "click" in the audio VERY noticeable when listening within the "center freq" artifact. I don't notice it with any of my other...
I was looking at this product and thinking it might actually have helped measure the frequencies at various points during my softrock lite 80m build ... I'm...
Good Evening All, Today I was able to ship twenty of the v6.3 15m/12m/10m PA/Filter kits and have a second group of ten ready to mail in the morning. Waiting ...
Sorry gents but I'm not good with setting up computers. Have just got the creative sounblaster usb MP3+ and loaded drivers.... using the V6 softrock receiver...
Please excuse the bandwidth but my laptop is ill and Helmut's email is on that machine! Helmut, can you please contact me off list Thanks Ian, G3ROO...
Hi all. Can somebody enlighten me on how to get the paddle keying support with the PowerSDR (Guido's) or PowerSDR-IQ (Christos's) using the USB-I2C interface...
I am trying to test my RXTX 6.2 40/80 and shortly after "Starting Radio" I get a dialogue box stating "Floating Point Error". The only way I can find to to...
Hint: Here is how I do it.... 1 check E-bay for o-scopes that are close to you (100 miles ???) (You can set a search for o-scopes based on distance) 2...
Hi all, I have just completed the PCB design of the "Motherboard". It is in the Files under 9V1AL. It is designed with KICAD and I have uploaded the KICAD...
FWIW, I bought a used 100 MHZ digital O-scope locally for under $75.00. I then spent $16.99 for a good set of new 100 MHZ probes on e-bay. Works great and it...
Summary info received from Engineering at SiLabs: Production tells me that speed grading was implemented on or about 27MAR08. (don't know the delay, if any, to...
Hi all, This message is probably more appropriate to send to Tony or to Tom, but thought I'd ask the group anyway..... Does anyone have an Si571 in stock???...
I'm running PowerSDR V1.9.0.13-sr40 with a Si570 USB interface. It works well & I've got it perfectly calibrated. My only gripe with it is there doesn't seem...
Summary info received from Engineering at SiLabs: "Production tells me that speed grading was implemented on or about 27MAR08." (don't know the delay, if any,...
