Alex and Tom, Thanks for your suggestions. I'm still having problems, but I noticed something new. I think you're agreeing that 85 (decimal) should be used in...
Bob, Try clicking "Start Radio" to STOP the radio BEFORE changing bands (ie center freq in the multi-band mode). After changing bands, click "Start Radio"...
Good Morning All, I have another 50 USB I2C kits ready to mail on September 2 when the USPS is open for business after the holiday weekend. The ATTiny45...
Hi Alex, I tried (1) clicking the stop button, (2) changing frequency, (3) clicking the stop button to start receiving again. It still does not change...
Hi Tony how do I get on the list for this kit and how much. I will send funding via paypal quickly. thanks Matt Parkinson Military Equipment & R 390A Depot...
Folks FYI I have been sent many warnings about Grouply. See below the latest warning from another list that I belong: "There has been a rash of messages back...
that's a nice read, but a bit over my head. From: kevinsradioandamp Sent: Monday, September 01, 2008 9:21 PM To: softrock40@yahoogroups.com Subject:...
Hello, I'm now trying to get the Pa operating with no success. I've been following Robby's excellent Build and test notes. PTT is ok I read 12 volts on both...
Kees I ordered an freescale MC9S08QG - DIP demo and program board to be able to modify the code in the controller. Not to make it better but to add a litle...
Hello Bill, ... I am the Owner and/or Moderator of several YahooGroups and have removed all of them from Grouply. That way, no one can access to the messages...
Could anyone point me in the right direction for the construction of the transformers on the main board of the ver6.2 30/20 kit. After oct 2007 , i have come...
See attached This info worked OK for me, Coil info is at the mid LHS of the circuit diagram. This info came from the files but it is not easy to locate GL...
... engaged . ... according ... Hi, Bob When I had some issues in this area, they turned out to be due to poor solder joints, especially on the transformer...
Guys I wonder if someone could help me with a problem. I have a Softrock lite 8.3 = Xtall and it works very well. I wanted to experiment with tuning the Si570 ...
I have posted some detailed build instructions for the RXTX V6.2 on my website. Included are instructions on winding the transformers and coils. While the...
This is a great idea, Anjo, and should work easily. You have to pick an input such as PTA5 or reassign one of the band pass selector pins ( PTA3 or PTB0 or...
... From: "Chris Stake" The SCL and SDA lines sit at 3.3 ... I have used only the DDS parallel http://groups.yahoo.com/group/softrock40/files/WB8LGA/ (DDS...
Instead of using an offset, another possibility would be to have the frequency jump between two adjacent memory locations based on the input pin. Then you...
Alan, I've tried swapping SCL with SDA, makes no difference. Polarity must be ok since the SCL and SDA lines go high between data streams. As you say LPT ...
Oops - so it is! From: Jose Bonanca Sent: Tuesday, September 02, 2008 8:37 AM To: softrock40@yahoogroups.com Subject: Re: [softrock40] Re: winding transformers...
