Doug, I'll try updating the softwware again maybe that will work. I'll let you know after the weekend. kevin Doug Vahrenberg <imonem@...> wrote: If you...
To:Ilias A Thur-hull transducer is an option,but if your crafts hull does have a Deep-V or a deep keel.You must concidure the placement of the transducer very...
I wanted to let you know that "reset to factory defaults" should not remove any firmware updates you have applied. The "reset" command should only cause all...
That is correct. In order to use the cards that are over 2Gb you do need to have 3.720 software. The card manufactures change the way they manage data so we...
I tried to mount the transducer on the jackplate and even tried to trolling with the motor tilted up but I still had to much interference. Is there a...
We proabaly need to see pics of the back of your boat. If you look in the FILES section we have a document with what we need to help. Here is a link to that...
To Tom Boy wish i knew this yesterday! Was out on the Salt and captured a sceen image of it,no good now knowing this. How do you want to recieve the...
Tom I'll take some shots this weekend. The problem is not in shallow water it's all over the lake at high speed. 35 mph plus. With the switch switched to the...
I have a Skeeter 210sl. I mounted mine on the face of the hull where the drain plug/water intakes are located. Initially I would lose bottom lock between...
Thanks for the reply Tom, My unit is set to fresh water. It is only right once in a while, instead of wrong once in a while. What would have made it work so...
new here but i have tried to find posts by others with similar issues, none found. i just bought the 797 c2 last weekend. mounted it up on my pontoon boat and...
I'm not one of the techs but I know some one will ask if you can put a screen capture up in the photo section. Curious on my part, does the side scan show the...
Keith, Thanks for the response. The SDHC (from what I understand) will only transport data one way so I dont think it will work? If you know about this I...
I get to looking and I think the SDHC just means they compile with a new standard for high capacity cards. The regular large SD cards look to fall into there...
In the link is a great thread on discussing SD cards... http://groups.yahoo.com/group/sideimaging/message/4274 Keith Councell Quality Engineer Johnson...
hey warren, whats the point of two transducers? what do you mean right and left on your boat? if i run 2 of them can i get a better image quality? i would...
I just looked at your images. It looks electrical interference to me. Do you have another graph running at the same time in close proximity to the SI...
I Love my 797 and have pretty much learned how to use most of it's functions. I have a serial cable and Humminbirds PC Program. I have changed waypoint names...
Guys, I've been struggling with this darn installation. I may have to mount on the back of my boat on one of the two lenco 164 trolling motors. It is...
... Maxtmoss, It appears that your trolling motors would sit in the water with a nose up angle of about 30 degrees when operating (based on your pictures)and...
Sorry to hear that I did not get the word out soon enough... I think you should be able to email me a recording. Recordings can be quite large, but if you...
Thanks Kevin, Just to clarify... I need a short recording as opposed to a screen capture. Screen captures show me that the unit is not working, but not why....
When a sonar unit like the 997 or 987 sends out a ping does it do so in 4 different frequencies? Like for the 987 you would have a 50 mhz, 200mhz, 262mhz and...
Hey guys, I have a 1/2 gig sd card right now (Kingston) but the record time for an si "mark" is about 30 secs. What is the fasted record time and what sd card...
I started with a X brand wal-mart card and got about the same results. Then after reading the posts on this board, I got a sandisk ultra II and I believe it...
The extreme 3 is an order of magnitude faster than the ultra 2.... I havent timed it, but I'm thinking in the "less than 5 seconds" range - fast enough that...
Look at the DATABASE here on the Group. Humminbird wants to get feedback on SD card brands and times and if they work.( So please add your findings) You can...
I tried to mount the transducer on the jackplate and even tried to trolling with the motor tilted up but I still had to much interference. Is there a...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
