Has anyone got one of these i need it to reshaft a customers broken one. the Pro 2.5 Ti Tip Harrison made was a 52" long drive shaft. the specs are 52...
Jeremy Ingle
jfi@...
Oct 2, 2008 5:20 pm
73725
Jeremy, If you haven't already checked them out... SK Fiber has 5 long drive shafts at 50" http://skfiber.com/specs.html Graman has 3 long drive shafts at 52"....
Bernie Baymiller
blbay@...
Oct 2, 2008 6:35 pm
73726
Mike Tait of SMT Golf has written a series of articles on golf equipment and I've added the first two to my resource pages at ...
jhm@...
Oct 3, 2008 7:39 pm
73727
... Thanks, John and Mike. Interesting articles. I agree 100% with the "Which is more important" article. I agree in principle with the "Adjustable screws"...
Dave Tutelman
dtutelman@...
Oct 3, 2008 10:24 pm
73728
Thanks for the nice note, Dave. I passed it along to Mike. More articles to follow. Hope the RSG Ohio gang had a good time at the annual outing. John ... -- ...
jhm@...
Oct 6, 2008 1:19 pm
73729
I've added the rest of the articles from Mike and also added one from Roy Nix, founder of the AGCP (Association of Golf Clubfitting Professionals). ...
jhm@...
Oct 6, 2008 4:25 pm
73730
... Good! I saw the latest today. Pretty good stuff. Roy's article needs some editing, but it's a great concept. ... Wonderful! You can see the writeup at...
Dave Tutelman
dtutelman@...
Oct 6, 2008 10:13 pm
73731
... You'll also want to see <http://www.thegemme.com/writeups/Ohio08_Thor.html>. ... -- Shoptalk ** Sponsored by the new Aldila Voodoo. Learn more at...
Dave Tutelman
dtutelman@...
Oct 6, 2008 10:22 pm
73732
laughed out loud at the "Coops" hand held story. John ... -- -- Shoptalk ** Sponsored by the new Aldila Voodoo. Learn more at http://aldilavoodoo.com/...
jhm@...
Oct 6, 2008 10:31 pm
73733
I know that Tflan likes to call you "Dr. Tutelman" but after reading Thor's recap, I think that a new nickname (Skip Tutelman?) might be appropriate. John ...
Hosel looks like it is a separate piece than the head. Is there anything special I need to do to remove this shaft? Thanks, Tom Janson -- Shoptalk **...
Tom Janson
tom2000ca@...
Oct 7, 2008 3:35 am
73736
I find the D2 to be one of the easiest of the Titleist bore throughs from which to remove the shaft. I've done quite a few of them using Golfsmith's heating...
Thomson, Jim
THOMSOJ@...
Oct 7, 2008 1:04 pm
73737
Use a heat gun and standard shaft pulling techniques. I had no problems with mine. The heat gun provides more uniform, gradual heating of the hosel/head and...
Drilling the old shaft tip to make a blind bore is a fairly common practice. But there's one caveat - be extremely careful when drilling. The slightest...
TFLAN
tflan@...
Oct 7, 2008 3:55 pm
73740
It's an aluminum sleeve. Nothing special to do. Just carefully applied heat and a good head pusher (shaft puller). But, see my response to another post for a...
TFLAN
tflan@...
Oct 7, 2008 4:02 pm
73741
Dave and gang: I've added Mike at SMT as a member of the shoptalk list. He sent me a reply to your post below to clarify a few things and I thought it would...
jhm@...
Oct 7, 2008 4:20 pm
73742
 I did a lot of bore through heads when I was building at HotStix in Arizona. A regular shaft puller technique while heating both the hosel and the...
Robert Devino
robertdevino@...
Oct 7, 2008 7:16 pm
73743
... Exactly! As I said, putting 200g extra AT THE TOE of the driver would only move the CG by 1". The reason the CG moves 2" is that, when you weld a whole...
Dave Tutelman
dtutelman@...
Oct 7, 2008 10:54 pm
73744
Thanks for the info. I'll give her a go. Tom -- Shoptalk ** Sponsored by the new Aldila Voodoo. Learn more at http://aldilavoodoo.com/...
Tom Janson
tom2000ca@...
Oct 9, 2008 12:08 pm
73745
The person I'm reshafting this for wants a low-torque shaft but not very 'stiff'. Wishon has one that I think will work. I'm not going to insert it all the...
Tom Janson
tom2000ca@...
Oct 9, 2008 1:11 pm
73746
Tom, Check out the SKF Pure Energy A-flex. I'm playing one in a 460cc Bang-O-Matic head plugged beyond 1½" depth at 48" club length. Very well made,...
Bernie Baymiller
blbay@...
Oct 9, 2008 1:43 pm
73747
Here's some info on the Graman CUL Series (known as Chrome Limey). http://www.clubmaker-online.com/graman.limey.html 48", available in several different weight...
jhm@...
Oct 9, 2008 3:06 pm
73748
You might want to take a look at some of the Graman shafts. They have some longer shafts available and a veriety of torque options. The blind bore is the...
Robert Devino
robertdevino@...
Oct 9, 2008 3:08 pm
73749
shoptalk-digest Thursday, October 9 2008 Volume 01 : Number 5864 ... Date: Tue, 7 Oct 2008 08:49:04 -0700 (PDT) From: TFLAN <tflan@...> ...
shoptalk-digest
owner-shoptalk-digest...
Oct 9, 2008 3:15 pm
73750
Michael at Harrison sent me results of robot testing they did with Golf Labs. They tested their Saga shaft against 3 high end shaft models from 3 different...
jhm@...
Oct 14, 2008 6:28 pm
73751
correct link might help (thanks Todd at Optimalflight): http://www.clubmaker-online.com/harrison.saga.robot.html John ... -- Thanks! John Muir skype: jhmuir ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
