http://www.mmgolf.com/ Anybody have experience with these folks thanks Don Johnson...
BTM_Clubs
btm_clubs@...
Aug 2, 2005 2:16 am
70646
Dynacraft is now under new ownership, does anyone have any pertinent info? Frank...
Fjbold1@...
Aug 2, 2005 2:26 am
70647
I was wondering what exactly was happening, there web site has been down for a week. Jay ... From: Fjbold1@... To: shoptalk@... Sent: Monday,...
comgolf
golfingat7@...
Aug 2, 2005 2:50 am
70648
On one of the forums it was said that Hireko or a foundry with common ownership ties to Hireko bought/saved/took possession of Dynacraft. This foundry was...
Don M
don@...
Aug 2, 2005 3:39 am
70649
That would explain the lack of creativity at Dynacraft over the past few years! Cub ... From: Don M To: ShopTalk@... Sent: Monday, August 01, 2005...
Cub
koa.cubsclubs@...
Aug 2, 2005 5:05 am
70650
I have bought a few driver heads through M&M. The service was friendly and quick. I can't vouch for the quality of the heads, but none have been returned by...
CCCgolfUSA@...
Aug 2, 2005 12:57 pm
70651
This deal just happened. -Don M...
Don M
don@...
Aug 2, 2005 1:22 pm
70652
But you said Hireko was their source foundry. Therefore my comment. Cub ... From: Don M To: ShopTalk@... Sent: Tuesday, August 02, 2005 3:05 AM ...
I just looked at the Canadian dealer for Dynacraft on the web. They are called Golfquip. They are having a business closing sale. WOW....
Alan Joyce
acj@...
Aug 3, 2005 12:00 pm
70655
They were unable to hang on while DC burned. -Don...
Don M
don@...
Aug 3, 2005 1:14 pm
70656
Yep, they were losing business because they couldn't get stock from Dynacraft to sell to their customer base. I've met Guy Wakutz and feel badly for him....
shoptalk@...
Aug 3, 2005 5:27 pm
70657
I've bought components from them a half dozen times. No complaints. They've shipped quickly and a couple of times included a handwritten note of thanks. Ed...
Ed Gurganus
gurganus@...
Aug 5, 2005 12:15 am
70658
I also have no complaints with M&M. -- TCM GOLF tom.matteucci@......
tom.matteucci@...
Aug 5, 2005 1:46 am
70659
Hi All, Im moving my shop and Im taking all of my heavy gear ie: Burr King's and Baldor's to a new hi production facility, but I need some machines for my...
DADUGALLY@...
Aug 9, 2005 7:38 am
70660
Dave I just set up a new shop and used Golf works for the 1x42 with the cutter and ferrule turning fixture. I believe it was about three hundred and it works...
Volcgolf@...
Aug 9, 2005 11:55 am
70661
Lee Valley Tools sell a decent 1" x 42" sander (no motor) for about $60. I've had one for years driven by a 1/4HP motor taken from an old furnace blower. It...
Ron Kellison
kellison70@...
Aug 9, 2005 1:50 pm
70662
In a message dated 8/9/05 3:31:28 A.M. Eastern Daylight Time, DADUGALLY@... writes: What I still need is a tip sander 1x 42, and a linen belt ferrule...
Arniesclubs@...
Aug 9, 2005 1:51 pm
70663
In a message dated 8/9/05 9:42:33 A.M. Eastern Daylight Time, Arniesclubs@... writes: What I still need is a tip sander 1x 42, and a linen belt ferrule...
Arniesclubs@...
Aug 9, 2005 2:02 pm
70664
I need information (actually a source) for these shaft extenders that screw on to these Harbor-frieght grinders. I'm sure it's a standard type thread but don't...
comgolf
golfingat7@...
Aug 9, 2005 3:22 pm
70665
I have a rescue head that I hit very well, and so does anyone else that has hit it. I would like to find this head in different lofts, but using the few...
Tom Barnett
tmb@...
Aug 9, 2005 4:25 pm
70666
shoptalk-digest Tuesday, 9 August 19105 Volume 01 : Number 5617 ... From: Alan Joyce <acj@...> Date: Wed, 03 Aug 2005 07:32:05 -0400 ...
owner-shoptalk-digest...
Aug 9, 2005 4:39 pm
70667
I bought this today, I have not fired it up yet, but will advise when I get a chance to put it to work. For about an extra $400.00 you can order it hard...
DADUGALLY@...
Aug 10, 2005 6:20 am
70668
David It has the same belt setup as mine but with an .035 blade and measuring table on the other end instead of a grinding wheel. I got mine from Mitchel for...
Volcgolf@...
Aug 10, 2005 3:13 pm
70669
I know several of you have had some experience using the Raven stepless model, and I've typically heard good reports here. I've used them in the past too....
Brian Parkinson
bhp@...
Aug 10, 2005 9:29 pm
70670
Brian A while ago, and I'm not sure how long the Raven stepless shafts were made by Nippon and were the most consistent shafts I have ever used. They had no ...
John Payne
jcpayne@...
Aug 10, 2005 10:36 pm
70671
In a message dated 8/10/05 5:18:37 P.M. Eastern Daylight Time, bhp@... writes: I was surprised on my latest order when the shaft had the Apollo...
Arniesclubs@...
Aug 11, 2005 1:59 am
70672
Hi all, I just bought one of Tom W's 715CLC intro specials... not as big as some but 375cc is huge to me. My previous drivers are 230cc and 260cc ...
Jen Kuntz
shoptalk@...
Aug 12, 2005 11:46 am
70673
Hi there, Does anyone have shaft specs from a '99 catalog? I am trying to update something and want to find out what the specs were on a Harrison 3.5 UL wood...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
