One of my AP-1s has come up with an annoying problem. It was working just fine last week, and after one album side was done, and it was supposed to play...
Seeburg didn't always consider maintenance access when designing things. Here's the deal: The Clutch Yoke Assembly -- the fork-like thing that moves the...
Hi all - hope everyone is doing well so far this year! I'm diving into cleaning up my STD4 Mardi Gras and had a thought- Back when I first got it - it worked,...
I find the Seeburg articulating parts have too closer tolerance on axis pins. Our guarantee is void if the customer places the box anywhere close to a swimming...
Wes, It was kind of a cool house, and I love swimming, but I can't imagine living with that chlorine smell everywhere -- the pool was in the basement, open to...
If it uses the traditional 2 coil relay it gets the scan coil energized on selection, if however it uses the opto isolated triac as the HSC1 does then it scans...
... I don't have a manual on this one and quit Seeburg for the next to last time just before this model came out, so I can't say with certainty that this is...
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=13723&item=753317819 Looks like it's at $20.... no bids yet. Seller dosn't know what it is either!...
THIS IS A GUESS looks to be disco era controler for colored flashing lights which vary by chanel & frequ. ... ViewItem&category=13723&item=753317819...
... That would be my guess, too. Perhaps used on SMC3 (but I doubt it) or as an option for one of the CD jukes. It was NOT used on the VMC. Cheers, Tony...
It was actually easier to do it right than it was trying to avoid doing it right. I just needed a little help getting the mechanism out of the cabinet (it's...
Cleaned the DES (key pad) and it didn't help - I even started the machine up without the DES connected - just to make sure it wasn't sending an error inducing...
... This will also happen if the Main Trigger OneShot in the black box fires with no corresponding output from any of the Data OneShots. Check to insure that...
your best bet in this is to rewire the mute relay from a simple short of the audio to connecting to another audio scorce. right at the input to the volume...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the seeburgjukeboxinformationclub group. File...
seeburgjukeboxinforma...
seeburgjukeboxinforma...
Jan 16, 2003 3:44 am
731
Hi All - Don't know how many of you have played with the Black box and an scope, but here goes: I'm mainly concerned with my reset and select light - it will...
... Pins KK and J should be at -13 VDC, which comes from the DCC. DO NOT RUN A BLACK OR GRAY BOX WITH ONE OF THE SUPPLIES (either -13 or -27 VDC) NOT...
Well, it's dead then. I have been running the machine while KK and J were at 0 volts and the black/gray boxes were connected. Thank you everyone for your...
Guys, I am trying to rejuvenate my DS160 which hasn't been used for about five years. The current problem relates to the trip circuit, which was in fact...
don't worry about wave forms, chances are you have a shorted solenoid, or a bad cap. if you trip the solenoid lever manually as soon as the solenoid buzzes and...
David, the 2050 grid is negatively biased with pure DC to prevent the tube from firing. When it fires, the grid is grounded by the trip switch, and there is no...
sorry it is the stepper that has the cap problem but those coils go bad too. ... prevent the tube from firing. When it fires, the grid is grounded by the...
Thanks very much for the info, I was thinking along the same lines when I saw that big ol' selenium rectifier on the mechanism. It would also be consistent...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
