Hi I just picked up a R. I have never seen one like it. Does anyone know if they ever made a "Silver edition". The tin behind the mech is silver,the slik...
Greg, I don't think that's original. I have seen some where the gold color has been "scrubbed" off, in spots. Perhaps someone scrubbed part of the gold color,...
Donnie, Are you sending me that board ? Ron ... From: Lala Blah Blah <oldstuff1967@...> Subject: Re: [Seeburg Jukebox Information Club] Tony Miller To:...
Hello Ron I too am having problems with my yahoo server. The group address for info keeps getting sent back to me as undeliverable. Have you ever taken a...
Wayne, Thanks for the info-- I have never done cabinet work, however I worked next to a gentleman for years that did nothing but LPC-1/480 cabinets. I have...
The company that marketed it is Decar, the product is Decarlite. It's my understanding that the correct pronunciation is like "Decker" and "Decker-lite". They...
Hello Keven and Ron Have either one of ever completely stripped a unit? Would like your input on where I would start. Any other informationwould be a great...
I've never gotten one that far apart. I had an LPC-1 that I sold which had pretty bad Decarlite on the sides, but the front looked fairly good. Since most...
Wayne, Like I said--I ainna neva done it--I have watched my friend sit a cabinet on it's side and just lift a corner and "pull" it off, sometimes with me...
Hello Again Ron & Kevin Formica will be glued on with Lepages Contact cement. Basicly you take a paint roller and tray and pour the contact cement into...
Well, after all I've been through with my amp, it fried tonight. Last weekend I was having some issues with what appeared to be a short of sorts, but I kept...
I installed a SAS2 in a USC1 Bandshell and, after much cleaning and adjusting on the Mech and tone arm, it energizes when a small hole 33 1/3 record is played....
Hello Again The hardware I was refering to is the items place inside the cabinet. Amp, speakers controls ect. Removal of the speakers, power supply and...
... \ Ron, I'm curious how you learned that? DiNoc is a product of 3M and is currently in production -- I don't know if it was 50 years ago. Do you have...
Chrome is one of those things that's getting harder to have done. Every city of any size used to have at least one shop that re-chromed bumpers and stuff, but...
Ohm out the amp to see if you blew out the transistors, but from what you describe, it may be the power transformer failing. Ron or Kevin will be able to point...
You had an "8 amp" fuse in it----it requires an 8/10 amp-- I think, if it were me I would just check the usual suspects for another amp--course, they sell them...
Thom, Yep--IF, it's a "-2" PCB-- if it's a "-1 PCB", contact me off list--Ron Rich ... From: Thom <pilotthom@...> Subject: [Seeburg Jukebox Information...
Maybe you did. I was alway using this stuff for other purposes. What did it do for you? Wayne ... From: Duke And Rat <dukenrat@...> Subject: Re: [Seeburg...
Wayne, It's all pretty straight forward-- components un-plug and slide out, (including the mechanism--which MUST be removed). Lid glass--one caution--be sure...
Terry, Yes, I am aware of the 3M connection--I read that somewhere, probably in Always Jukin Magazine (www.alwaysjukin.com ). I also recall reading that 3M...
Man--I knew it--I would need to leave the room at times, when the "Grip glue" was being used, cause I have no sense of smell---( OK, before you wise crack--no...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
