the late Ed Bench was a fellow you could not be around without learning a ton of stuff http://www.stlradio.com/hof-03-04.htm my friend tom besch worked in the...
Tom said the library units were nolonger in use when they came back from the boatmens bank building after the fire. and it was probably you I gave the cash to....
Can you Tell Me if there is a good service person in the oklahoma city, oklahoma area that i can contact. Also where i can get a good service manual for the...
Hello, I have an LPC-1 that was working fine for a long time. For no reason in particular it sat "unplayed" for a couple of months. When I went down to my...
Hello David Im Bob Myers and I learned from a guy here in OKC that has worked on jukeboxes for 35yrs. His name is Don 405-301-3758 he has a warehouse full of...
I would check and clean the contacts on the reversing switch first. Do you hear the reversing switch "flip" (should be a fairly audible "clunk" when it hits...
Hi John, There are several reasons this could happen. I am assuming that you left out the word "NOT" in the line"--jumping--would (NOT) reverse--" If you are...
The original 6L6 tubes were metal cased I do believe. Rated at 20w. The 6L6G means glass envelope, the 6L6GA's are glass 'coke bottle' style tubes. Where...
I'll try to locate the switch. I assume it should be fairly easy to locate as it should be at the end of the rail where the mechanism rides. Thanks for your...
Hello, I am not too familiar with how the mechanism works. I am mechanically inclined and I'm not afraid to try anything but I know when I should "stop"...
I re-capped my TSA-7 amplifier a few weeks ago and it sounds pretty good, but I noticed the kit replaced all the tantalum caps with electrolytic caps. I have...
Metal 6L6's were developed for the military during WWII and probably made until about '62 or so. Electronic surplus stores used to have gobs of them via...
John, It's no problem, PROVIDED, the mechanism cover was removed prior to it getting stuck. Big deal, if the cover is on it-- Ron Rich ... From: John Zybko...
OK...I give up...who is this? (you can email me off the group, since this is kinda far off the topic) And I must have misplaced that cash! :-) Tom B. is a...
I recap a lot of broadcast equipment (just finished yet another Optimod). I generally replace tantalums with aluminum electrolytics...with a few exceptions... ...
Hi All, What is a good source of connectors such as Molex brand that are used in a variety of jukes? I have several units, but I wish to connect a DEC wallbox...
Keith, I don't know where you are -- I have a local source for "Alex" brand ( a "Molex" knock-off brand) that I prefer over the originals--contact me off list,...
Just a thanks- I spent all day Tuesday cleaning and checking and adjusting. I found that one of the power tubes in the amplifier was bad, so I replaced it with...
Dean, There can be several things causing that--mostly too much "free play" "space" somewhere in the "drive train". Start by checking the action of the cam....
I have a std4 madi gras i have replaced the bulbs and all work but dont rotate, at times i have three bright and one dim three bright one dim Is there a repair...
Hello all, first time posting. I have a Seeburg AY-160 jukebox with selection problems. It has the "scans twice" problem. This machine worked fine until...
I hope someone will answer David in an informative post for others who might be having a similar problem with their STD's! Does he need a new sequencer or not?...
... Bill; Okay, I'll chime in. How it works is described on my website: http://home.pacbell.net/fmillera/std_'chaser'_lights.htm I'm sure it can be repaired,...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
