You are right about putting that on the table but you will lose the use of reverse teeth if that is what you use. Many times the strenght in the steel of the...
Use acetone to remove the oil, and don't put any more on there:-) If you still have trouble getting blades to stay in the clamp, try roughing the surface of...
Andy use a little bit of paint thinner to wipe off all the blades & blade holders. That should work. P.S. All blades are covered in oil during manufacturing...
Alvin, I think that's what I would call it also here in Phila., Pa. I sometimes have heard it called and sold as "luan" ply wood for sub flooring. I think it...
Plyfloor is 1/4" Baltic birch that is generally used for underlayment. It has a phenolic based glue that is waterproof. It's generally made in the US, using...
No problems here with photo's, Grumpygrandad alvin nave <naveal@...> wrote:yes i have, i cannot get into the photos page at all and no answer yet as to...
andy, if you have time look at a dremel 1800, they cost around 260 plus tax, insurance and if you live in washington state, your firts born, all your pets and...
Hi to all the others in the group, can some one recomend a font that would be ok to use in scrollsawing I had a good one and lost it when I formated my hard...
[] Ron Adams asked where he can get the plans for the Disney Castle night light and window lights. They were in Scroll Saw Workshop magazine: Issue 18 Spring...
Stencil fonts work well. Here is a link to a number of free ones http://simplythebest.net/fonts/stencil_fonts.html ... From: scrollsawing@yahoogroups.com...
Grumpy, I just uploaded a test photo (I deleted it). The photo section has 24megs of pics and the limit is 30. If you are trying to load several very large...
Thanks for your help, sorry to seem thick but could you tell me where I can get it from Reagards Derek Gibbs paul hamel <hamelp1@...> wrote: In Word it...
Thanks for your help I think this may work for what I need Derek Gibbs Norfolk, England Greg Muri <gregmuri@...> wrote: Stencil fonts work well. Here...
Paul, I have Word and never heard of this font. Where did you get? Smitty in GA ... From: scrollsawing@yahoogroups.com [mailto:scrollsawing@yahoogroups.com] On...
I also have word but don't have the scroll_it font. It may have come with another program. I have tons of fonts that I use that came with Print Master (these...
Sorry, but attachments like this are not permitted in this message base, nor are they allowed by others discussion groups within Yahoo, as a security issue. If...
Paul, I appreciate your instructions but, as I said, I do not have this font in my Word program. Did you acquire it with another program and then it was added...
Smitty, I have Microsoft XP Office which came with the computer. I found it when I used The Wood Trax program. That is what they used and going through my list...
I'm the guilty party......but i'm not sure what is going on. I clicked on reply to sender...not the group. So why it showed up in the group mail is beyond me....
If you press reply to an existing message, it does in fact reply to the source, the group. If you look at the address you are sending too at the top of every...
well i decided to try my hand at cutting something thicker than 1/4 inch ply and they are worlds different.cut out a standing unicorn puzzle out of 3/4 pine,...
Mike has a deal that he advertised in Scroll Saw Workshop that he'll sell a dozen trial blades for a dollar. You could go for this instead of buying a ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
