Does anyone have an S-9 or S-10 in or around southern WI? I'd just like to get a closer look at one and see if I will even fit in it comfortably. Please let...
Hi everyone,    I just installed my new 912 ULS engine. I went through the operators manual to get to know the engine better for it to last. The problem...
Thanks a lot Andreas...then I'll just jump in my plane and star to have some fun...!! Thanks again... Juan ... From: Andreas Konzelmann <konzel@...> ...
Ready to call tech support? Wait! Rans tech support now has their own section on the Rans Clan forums. Tech Support regularly checks the Rans Clan forums to...
Can enyone send a picture or description on where to install the oil radiator on a S-10. My engine is a 912 ULS and the oil temp is running hi (above 270...
I'm in Lakeland, FL, home of Sun 'n Fun. I'll be leaving here for Oshkosh on the afternoon of Friday, 7/25. I'll be stopping in Macon, GA overnight and then...
Hey gang, I'm restoring an S-10. The fabric is pristine. I want to replace the floorboard and add brakes to the right seat. I didn't build the plane but I have...
The only way to remove the floorboared is to remove the firewall and everything foward. Ran into this 3 years ago when I upgraded to hydraulic brakes. Had to...
... I had hope that it was a removable item when I saw in the plans that it's held in place with nutplates. If it can not be removed after the fact, then why...
RANS lunch-in at the RANS booth(AirVenture/OshKosh) on Tuesday, July 29th at 12:00pm (Noon) This is a great way to meet the team at RANS as well as other...
... Hi Pat, the panel looks great. Where did you get the carbon from? Was it cut to shape for you, or did you have to spahe it yourself? How much did you pay...
Hi Shaun, I made it myself. I bought a sheet of 1/4" thick plate glass, about 12" x 48" and laid it on my workbench. I took a razor blade to the entire surface...
Thanks Pat, I thought of making it myself (I used to do my own repairs to my kayaks & canoes in carbon kevlar) but hadn't a clue how to get a decent surface -...
A fellow just stopped by and told me to look for a J3 to buy. He wants c-85 to 0-200 power and a good clean restoration. Pretty much gave a green light to the...
Hi, I have just re-assembled my "new to me" Rans S-10 (ex N4087Y, now C-FUQP) and the right wing has a little play at the wing root when moved up and down at...
I have no play. I would recommend posting to "RansTech" on www.ransclan.com and ask them what is the tolerance is. They may have a fix, also. That's a definite...
Can someone please point me in the right direction for any fuel tank AAD's/ recalls, etc. for the S-9 and I assume for the S-10. I can't seem to navigate to...
Hi Melinda Call ranstech or speak to Steve in stores as there is a fix for this, basicaly two plates riveted to the outside of the spar and a longer clevis pin...
Hi Melinda I noticed your new registration mark as CF, you are located in Canada? I just bought a Rans S10 as well and would love to talk to you. Can you...
Thanks Gordon and Jeff for replying. According to the Rans website, their tech support is away until Aug. 5th. I will call them. Gordon, the fix you...
Might consider getting rid of those clevis pins in favor of AN bolts & bushing/spacers. Torqued to eliminate the "slop" that caused the holes to elongate in...
Hi everyone. I am glad I found this page as I have wanted to build a S9 for quite a while and am now getting close to having the means to accomplish that...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
