i checked the trunking and there is no receive only...there is a conventional
scan only...there is no trunking scan..i think if you put the frequency in the
conventional you should receive trucking ..i have not tryed it but i have heard
that it works...



________________________________
From: Dan Blasberg <ka8ypy@...>
To: radio-programming@yahoogroups.com
Sent: Sun, March 28, 2010 8:08:56 AM
Subject: Re: [radio-prog@yhgrps] xtl5000 question from newbie

 
is that for a trunked personality?

I believe that even with receive only checked for a trunked
personality, the radio will still auto affiliate with the system to
get the control channel information.

On Mar 28, 2010, at 7:40 AM, woody Carner wrote:

> ok... i checked a xtl1500 and there is a place where you can check a
> receive only...i didn't have a xtl5000 code plug to look at...
>
> 't
>
>
> ____________ _________ _________ __
> From: wa1emt <WA1EMT@YAHOO. COM>
> To: radio-programming@ yahoogroups. com
> Sent: Sat, March 27, 2010 11:27:35 PM
> Subject: [radio-prog@ yhgrps] xtl5000 question from newbie
>
>
> I know its been covered (probably) but I got a simple question.
> can a 800mhz xtl5000 with a w9 control head be programmned to act
> like a scanner on a trunked system. I do not want to transmitt on it
> just receive. I know I can get the cable and cps but if its a total
> lost cause then I wont even try.
> Im confused on the fact that a scanner can do it just fine so why
> cant a motorola radio.
> The reason for using it is one I got it at a great cost.
> The second is that it has the w9 remote head and I dont have lots of
> room in my truck and this would work out great. Also becuse of the
> large alpha numeric display.
> I have seen tow trucks with 4 or 5 800mhz radios that are
> programmned for receive only and they use them to scan the local so
> and hpd systems for wrecks and such.
> There using motorola astro radios as well.
> Let me know what you can do to help me out on this.
> thanks in advance.
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------ --------- --------- ------
>
> Community email addresses:
> Post message: radio-programming@ yahoogroups. com
> Subscribe: radio-programming- subscribe@ yahoogroups. com
> Unsubscribe: radio-programming- unsubscribe@ yahoogroups. com
> List owner: radio-programming- owner@yahoogroup s.com
>
> Shortcut URL to this page:
> http://www.yahoogroups.com/community/radio-programmingYahoo! Groups
> Links
>
>
>







[Non-text portions of this message have been removed]

is that for a trunked personality?

I believe that even with receive only checked for a trunked
personality, the radio will still auto affiliate with the system to
get the control channel information.


On Mar 28, 2010, at 7:40 AM, woody Carner wrote:

> ok... i checked a xtl1500 and there is a place where you can check a
> receive only...i didn't have a xtl5000 code plug to look at...
>
> 't
>
>
> ________________________________
> From: wa1emt <WA1EMT@...>
> To: radio-programming@yahoogroups.com
> Sent: Sat, March 27, 2010 11:27:35 PM
> Subject: [radio-prog@yhgrps] xtl5000 question from newbie
>
>
> I know its been covered (probably) but I got a simple question.
> can a 800mhz xtl5000 with a w9 control head be programmned to act
> like a scanner on a trunked system. I do not want to transmitt on it
> just receive. I know I can get the cable and cps but if its a total
> lost cause then I wont even try.
> Im confused on the fact that a scanner can do it just fine so why
> cant a motorola radio.
> The reason for using it is one I got it at a great cost.
> The second is that it has the w9 remote head and I dont have lots of
> room in my truck and this would work out great. Also becuse of the
> large alpha numeric display.
> I have seen tow trucks with 4 or 5 800mhz radios that are
> programmned for receive only and they use them to scan the local so
> and hpd systems for wrecks and such.
> There using motorola astro radios as well.
> Let me know what you can do to help me out on this.
> thanks in advance.
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Community email addresses:
>  Post message: radio-programming@yahoogroups.com
>  Subscribe:    radio-programming-subscribe@yahoogroups.com
>  Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
>  List owner:   radio-programming-owner@yahoogroups.com
>
> Shortcut URL to this page:
>  http://www.yahoogroups.com/community/radio-programmingYahoo! Groups
> Links
>
>
>

XTL5000 CANNOT be setup to NOT auto affiliate with a system,
regardless of whether a mic is attached or not.

Again...It is not possible.

Astro Spectras can be made to do so via a software setting in CPS/RSS.


On Mar 28, 2010, at 1:51 AM, wa1emt wrote:

> Well....I guess when I stated that I want it to receive only and not
> to affiliate with the system..I got told the obvious.
> Again...I know its possible...Id like to be told how.
> I know it can be turned into a paperweight if its not supposed to be
> on the system. THATS IF ITS TRANSMITTING.
> Would it be simpler if i stated that no mike would be plugged into it.
>
>
> --- In radio-programming@yahoogroups.com, "wa1emt" <WA1EMT@...> wrote:
>>
>> I know its been covered (probably) but I got a simple question.
>> can a 800mhz xtl5000 with a w9 control head be programmned to act
>> like a scanner on a trunked system. I do not want to transmitt on
>> it just receive. I know I can get the cable and cps but if its a
>> total lost cause then I wont even try.
>> Im confused on the fact that a scanner can do it just fine so why
>> cant a motorola radio.
>> The reason for using it is one I got it at a great cost.
>> The second is that it has the w9 remote head and I dont have lots
>> of room in my truck and this would work out great. Also becuse of
>> the large alpha numeric display.
>> I have seen tow trucks with 4 or 5 800mhz radios that are
>> programmned for receive only and they use them to scan the local so
>> and hpd systems for wrecks and such.
>> There using motorola astro radios as well.
>> Let me know what you can do to help me out on this.
>> thanks in advance.
>>
>
>
>
>
> ------------------------------------
>
> Community email addresses:
>  Post message: radio-programming@yahoogroups.com
>  Subscribe:    radio-programming-subscribe@yahoogroups.com
>  Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
>  List owner:   radio-programming-owner@yahoogroups.com
>
> Shortcut URL to this page:
>  http://www.yahoogroups.com/community/radio-programmingYahoo! Groups
> Links
>
>
>

Does anyone have the software for an impres charger?

King Regards Andre

ok... i checked a xtl1500 and there is a place where you can check a receive
only...i didn't have a xtl5000 code plug to look at...

't


________________________________
From: wa1emt <WA1EMT@...>
To: radio-programming@yahoogroups.com
Sent: Sat, March 27, 2010 11:27:35 PM
Subject: [radio-prog@yhgrps] xtl5000 question from newbie

 
I know its been covered (probably) but I got a simple question.
can a 800mhz xtl5000 with a w9 control head be programmned to act like a scanner
on a trunked system. I do not want to transmitt on it just receive. I know I can
get the cable and cps but if its a total lost cause then I wont even try.
Im confused on the fact that a scanner can do it just fine so why cant a
motorola radio.
The reason for using it is one I got it at a great cost.
The second is that it has the w9 remote head and I dont have lots of room in my
truck and this would work out great. Also becuse of the large alpha numeric
display.
I have seen tow trucks with 4 or 5 800mhz radios that are programmned for
receive only and they use them to scan the local so and hpd systems for wrecks
and such.
There using motorola astro radios as well.
Let me know what you can do to help me out on this.
thanks in advance.







[Non-text portions of this message have been removed]

Dan seems to have explained it adequately and accurately as far as most of
us know.  These radios transmit as soon as all the proper parameters are met
for "affiliating" with a trunked network so they can register to it.
Affiliating IS transmitting.  No way around it that I know of.  As Dan
stated, some earlier, older radios

Didn't need to affiliate and therefore could be used as glorified scanners
but the new current XTS and XTL 5K's just don't do it.



You state that "I know its possible".  Might be a great chance to talk to
the persons whom have these radios that are doing what you want them to do
and ask them how they're doing it.  Chances are they are either allowed on
the trunking network they are listening to or are using an older radio with
a W9 head on it.  And if they are monitoring with an XTL5K without
permission and NOT affiliating, well, then maybe you could let all of us
know how they're doing it!



Cheers!







From: radio-programming@yahoogroups.com
[mailto:radio-programming@yahoogroups.com] On Behalf Of wa1emt
Sent: Sunday, March 28, 2010 12:51 AM
To: radio-programming@yahoogroups.com
Subject: [radio-prog@yhgrps] Re: xtl5000 question from newbie





Well....I guess when I stated that I want it to receive only and not to
affiliate with the system..I got told the obvious.
Again...I know its possible...Id like to be told how.
I know it can be turned into a paperweight if its not supposed to be on the
system. THATS IF ITS TRANSMITTING.
Would it be simpler if i stated that no mike would be plugged into it.

--- In radio-programming@yahoogroups.com
<mailto:radio-programming%40yahoogroups.com> , "wa1emt" <WA1EMT@...> wrote:
>
> I know its been covered (probably) but I got a simple question.
> can a 800mhz xtl5000 with a w9 control head be programmned to act like a
scanner on a trunked system. I do not want to transmitt on it just receive.
I know I can get the cable and cps but if its a total lost cause then I wont
even try.
> Im confused on the fact that a scanner can do it just fine so why cant a
motorola radio.
> The reason for using it is one I got it at a great cost.
> The second is that it has the w9 remote head and I dont have lots of room
in my truck and this would work out great. Also becuse of the large alpha
numeric display.
> I have seen tow trucks with 4 or 5 800mhz radios that are programmned for
receive only and they use them to scan the local so and hpd systems for
wrecks and such.
> There using motorola astro radios as well.
> Let me know what you can do to help me out on this.
> thanks in advance.
>





[Non-text portions of this message have been removed]

Well....I guess when I stated that I want it to receive only and not to
affiliate with the system..I got told the obvious.
Again...I know its possible...Id like to be told how.
I know it can be turned into a paperweight if its not supposed to be on the
system. THATS IF ITS TRANSMITTING.
Would it be simpler if i stated that no mike would be plugged into it.


--- In radio-programming@yahoogroups.com, "wa1emt" <WA1EMT@...> wrote:
>
> I know its been covered (probably) but I got a simple question.
> can a 800mhz xtl5000 with a w9 control head be programmned to act like a
scanner on a trunked system. I do not want to transmitt on it just receive. I
know I can get the cable and cps but if its a total lost cause then I wont even
try.
> Im confused on the fact that a scanner can do it just fine so why cant a
motorola radio.
> The reason for using it is one I got it at a great cost.
> The second is that it has the w9 remote head and I dont have lots of room in
my truck and this would work out great. Also becuse of the large alpha numeric
display.
> I have seen tow trucks with 4 or 5 800mhz radios that are programmned for
receive only and they use them to scan the local so and hpd systems for wrecks
and such.
> There using motorola astro radios as well.
> Let me know what you can do to help me out on this.
> thanks in advance.
>

The other way to get if fixed is if you are able to locate someone with Astro 25
Depot Tool to remove the inhibited radio status.






________________________________
From: SIGN BANDIT <signbandit@...>
To: radio-programming@yahoogroups.com
Sent: Sat, March 27, 2010 11:52:07 PM
Subject: Re: [radio-prog@yhgrps] xtl5000 question from newbie


You'd be much better off selling that radio and buy a scanner and enjoy a little
bit of extra money. If you were some how able to get it to recieve only and it
accidently keyed up, it would show as an unauthorized radio and made inoperable
by a dispatcher and the only way to fix that is send it to Motorola.

--- On Sat, 3/27/10, Dan Blasberg <ka8ypy@verizon. net> wrote:

From: Dan Blasberg <ka8ypy@verizon. net>
Subject: Re: [radio-prog@ yhgrps] xtl5000 question from newbie
To: radio-programming@ yahoogroups. com
Date: Saturday, March 27, 2010, 10:40 PM



The current models of Motorola Astro25 radios (XTS series, XTL series,
APX series)) auto affiliate with the system they are monitoring. If
your radio is not supposed to be on the system, the system
administrator may inhibit your radio and you have a very expensive
paper weight. The only way to get the radio un-inhibited, is to have
the system administrator that zapped your radio, unzap it.

Motorola Astro radios (Astro Spectra, Astro Saber, XTS3000) can be
configured to NOT auto affiliate, thus, you can listen to the system
and not have an issue. But once you transmit on that system, you have
affiliated with the system and the rest is explained above.

On Mar 27, 2010, at 11:27 PM, wa1emt wrote:

> I know its been covered (probably) but I got a simple question.
> can a 800mhz xtl5000 with a w9 control head be programmned to act
> like a scanner on a trunked system. I do not want to transmitt on it
> just receive. I know I can get the cable and cps but if its a total
> lost cause then I wont even try.
> Im confused on the fact that a scanner can do it just fine so why
> cant a motorola radio.
> The reason for using it is one I got it at a great cost.
> The second is that it has the w9 remote head and I dont have lots of
> room in my truck and this would work out great. Also becuse of the
> large alpha numeric display.
> I have seen tow trucks with 4 or 5 800mhz radios that are
> programmned for receive only and they use them to scan the local so
> and hpd systems for wrecks and such.
> There using motorola astro radios as well.
> Let me know what you can do to help me out on this.
> thanks in advance.
>
>
>
>
> ------------ --------- --------- ------
>
> Community email addresses:
> Post message: radio-programming@ yahoogroups. com
> Subscribe: radio-programming- subscribe@ yahoogroups. com
> Unsubscribe: radio-programming- unsubscribe@ yahoogroups. com
> List owner: radio-programming- owner@yahoogroup s.com
>
> Shortcut URL to this page:
> http://www.yahoogro ups.com/communit y/radio-programm ingYahoo! Groups
> Links
>
>
>

[Non-text portions of this message have been removed]







[Non-text portions of this message have been removed]

You'd be much better off selling that radio and buy a scanner and enjoy a little
bit of extra money. If you were some how able to get it to recieve only and it
accidently keyed up, it would show as an unauthorized radio and made inoperable
by a dispatcher and the only way to fix that is send it to Motorola.

--- On Sat, 3/27/10, Dan Blasberg <ka8ypy@...> wrote:


From: Dan Blasberg <ka8ypy@...>
Subject: Re: [radio-prog@yhgrps] xtl5000 question from newbie
To: radio-programming@yahoogroups.com
Date: Saturday, March 27, 2010, 10:40 PM


 



The current models of Motorola Astro25 radios (XTS series, XTL series,
APX series)) auto affiliate with the system they are monitoring. If
your radio is not supposed to be on the system, the system
administrator may inhibit your radio and you have a very expensive
paper weight. The only way to get the radio un-inhibited, is to have
the system administrator that zapped your radio, unzap it.

Motorola Astro radios (Astro Spectra, Astro Saber, XTS3000) can be
configured to NOT auto affiliate, thus, you can listen to the system
and not have an issue. But once you transmit on that system, you have
affiliated with the system and the rest is explained above.

On Mar 27, 2010, at 11:27 PM, wa1emt wrote:

> I know its been covered (probably) but I got a simple question.
> can a 800mhz xtl5000 with a w9 control head be programmned to act
> like a scanner on a trunked system. I do not want to transmitt on it
> just receive. I know I can get the cable and cps but if its a total
> lost cause then I wont even try.
> Im confused on the fact that a scanner can do it just fine so why
> cant a motorola radio.
> The reason for using it is one I got it at a great cost.
> The second is that it has the w9 remote head and I dont have lots of
> room in my truck and this would work out great. Also becuse of the
> large alpha numeric display.
> I have seen tow trucks with 4 or 5 800mhz radios that are
> programmned for receive only and they use them to scan the local so
> and hpd systems for wrecks and such.
> There using motorola astro radios as well.
> Let me know what you can do to help me out on this.
> thanks in advance.
>
>
>
>
> ------------ --------- --------- ------
>
> Community email addresses:
> Post message: radio-programming@ yahoogroups. com
> Subscribe: radio-programming- subscribe@ yahoogroups. com
> Unsubscribe: radio-programming- unsubscribe@ yahoogroups. com
> List owner: radio-programming- owner@yahoogroup s.com
>
> Shortcut URL to this page:
> http://www.yahoogro ups.com/communit y/radio-programm ingYahoo! Groups
> Links
>
>
>











[Non-text portions of this message have been removed]

The current models of Motorola Astro25 radios (XTS series, XTL series,
APX series)) auto affiliate with the system they are monitoring.  If
your radio is not supposed to be on the system, the system
administrator may inhibit your radio and you have a very expensive
paper weight.  The only way to get the radio un-inhibited, is to have
the system administrator that zapped your radio, unzap it.

Motorola Astro radios (Astro Spectra, Astro Saber, XTS3000) can be
configured to NOT auto affiliate, thus, you can listen to the system
and not have an issue.  But once you transmit on that system, you have
affiliated with the system and the rest is explained above.


On Mar 27, 2010, at 11:27 PM, wa1emt wrote:

> I know its been covered (probably) but I got a simple question.
> can a 800mhz xtl5000 with a w9 control head be programmned to act
> like a scanner on a trunked system. I do not want to transmitt on it
> just receive. I know I can get the cable and cps but if its a total
> lost cause then I wont even try.
> Im confused on the fact that a scanner can do it just fine so why
> cant a motorola radio.
> The reason for using it is one I got it at a great cost.
> The second is that it has the w9 remote head and I dont have lots of
> room in my truck and this would work out great. Also becuse of the
> large alpha numeric display.
> I have seen tow trucks with 4 or 5 800mhz radios that are
> programmned for receive only and they use them to scan the local so
> and hpd systems for wrecks and such.
> There using motorola astro radios as well.
> Let me know what you can do to help me out on this.
> thanks in advance.
>
>
>
>
> ------------------------------------
>
> Community email addresses:
>  Post message: radio-programming@yahoogroups.com
>  Subscribe:    radio-programming-subscribe@yahoogroups.com
>  Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
>  List owner:   radio-programming-owner@yahoogroups.com
>
> Shortcut URL to this page:
>  http://www.yahoogroups.com/community/radio-programmingYahoo! Groups
> Links
>
>
>

I know its been covered (probably) but I got a simple question.
can a 800mhz xtl5000 with a w9 control head be programmned to act like a scanner
on a trunked system. I do not want to transmitt on it just receive. I know I can
get the cable and cps but if its a total lost cause then I wont even try.
Im confused on the fact that a scanner can do it just fine so why cant a
motorola radio.
The reason for using it is one I got it at a great cost.
The second is that it has the w9 remote head and I dont have lots of room in my
truck and this would work out great. Also becuse of the large alpha numeric
display.
I have seen tow trucks with 4 or 5 800mhz radios that are programmned for
receive only and they use them to scan the local so and hpd systems for wrecks
and such.
There using motorola astro radios as well.
Let me know what you can do to help me out on this.
thanks in advance.

recently purchased Vertex Standard VX-824 UHF at local flea market

it does not have DTMF keypad it has four ABCD keys and LCD display, is possible
just replace front housing with DTMF keypad? or more electronics inside have to
replace?

anyone has part # for housing/cost?

Thanks

Thanks, I didn't want to "brick" them !!

73, Dick, W1KSZ

> To: radio-programming@yahoogroups.com
> From: esoldservices@...
> Date: Sat, 27 Mar 2010 21:04:21 +0000
> Subject: Re: [radio-prog@yhgrps] KW TK-760HG Software
>
> The software doesn't care except that it is VHF and a G model.
> Sent from my Verizon Wireless BlackBerry
>
> -----Original Message-----
> From: RICHARD SOLOMON <w1ksz@...>
> Date: Sat, 27 Mar 2010 20:58:52
> To: <radio-programming@yahoogroups.com>
> Subject: RE: [radio-prog@yhgrps] KW TK-760HG Software
>
>
> OK, thanks.
> Just wanted to make sure since I didn't see the "HG" Model in the Drop-Down
> Table.
>
> 73, Dick, W1KSZ
>
> > To: radio-programming@yahoogroups.com
> > From: esoldservices@...
> > Date: Sat, 27 Mar 2010 20:43:14 +0000
> > Subject: Re: [radio-prog@yhgrps] KW TK-760HG Software
> >
> > For TK760HG you need KPG56D software.
> > Sent from my Verizon Wireless BlackBerry
> >
> > -----Original Message-----
> > From: "Dick" <w1ksz@...>
> > Date: Sat, 27 Mar 2010 20:30:44
> > To: <radio-programming@yahoogroups.com>
> > Subject: [radio-prog@yhgrps] KW TK-760HG Software
> >
> > IIRC, this model requires different software. Can someone tell
> > me which one I need ?
> >
> > Thanks, Dick, W1KSZ
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Community email addresses:
> >   Post message: radio-programming@yahoogroups.com
> >   Subscribe:    radio-programming-subscribe@yahoogroups.com
> >   Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
> >   List owner:   radio-programming-owner@yahoogroups.com
> >
> > Shortcut URL to this page:
> >   http://www.yahoogroups.com/community/radio-programmingYahoo! Groups Links
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Community email addresses:
>   Post message: radio-programming@yahoogroups.com
>   Subscribe:    radio-programming-subscribe@yahoogroups.com
>   Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
>   List owner:   radio-programming-owner@yahoogroups.com
>
> Shortcut URL to this page:
>   http://www.yahoogroups.com/community/radio-programmingYahoo! Groups Links
>
>
>


[Non-text portions of this message have been removed]

Try the files section of the maxon lmr group

Mike


-----Original Message-----
From: radio-programming@yahoogroups.com
[mailto:radio-programming@yahoogroups.com] On Behalf Of graham
Sent: 27 March 2010 18:22
To: radio-programming@yahoogroups.com
Subject: [radio-prog@yhgrps] Maxon PM150 (SMX-4050) circuit diagrams

Hi there, does anybody have good copies of the circuit diagrams for this
radio? Thanks Graham.



------------------------------------

Community email addresses:
   Post message: radio-programming@yahoogroups.com
   Subscribe:    radio-programming-subscribe@yahoogroups.com
   Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
   List owner:   radio-programming-owner@yahoogroups.com

Shortcut URL to this page:
   http://www.yahoogroups.com/community/radio-programmingYahoo! Groups Links

thanks dave has any one got a copy of p210 program that works thay can send me
regards larry

The software doesn't care except that it is VHF and a G model.
Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: RICHARD SOLOMON <w1ksz@...>
Date: Sat, 27 Mar 2010 20:58:52
To: <radio-programming@yahoogroups.com>
Subject: RE: [radio-prog@yhgrps] KW TK-760HG Software


OK, thanks.
Just wanted to make sure since I didn't see the "HG" Model in the Drop-Down
Table.

73, Dick, W1KSZ

> To: radio-programming@yahoogroups.com
> From: esoldservices@...
> Date: Sat, 27 Mar 2010 20:43:14 +0000
> Subject: Re: [radio-prog@yhgrps] KW TK-760HG Software
>
> For TK760HG you need KPG56D software.
> Sent from my Verizon Wireless BlackBerry
>
> -----Original Message-----
> From: "Dick" <w1ksz@...>
> Date: Sat, 27 Mar 2010 20:30:44
> To: <radio-programming@yahoogroups.com>
> Subject: [radio-prog@yhgrps] KW TK-760HG Software
>
> IIRC, this model requires different software. Can someone tell
> me which one I need ?
>
> Thanks, Dick, W1KSZ
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Community email addresses:
>   Post message: radio-programming@yahoogroups.com
>   Subscribe:    radio-programming-subscribe@yahoogroups.com
>   Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
>   List owner:   radio-programming-owner@yahoogroups.com
>
> Shortcut URL to this page:
>   http://www.yahoogroups.com/community/radio-programmingYahoo! Groups Links
>
>
>


[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

OK, thanks.
Just wanted to make sure since I didn't see the "HG" Model in the Drop-Down
Table.

73, Dick, W1KSZ

> To: radio-programming@yahoogroups.com
> From: esoldservices@...
> Date: Sat, 27 Mar 2010 20:43:14 +0000
> Subject: Re: [radio-prog@yhgrps] KW TK-760HG Software
>
> For TK760HG you need KPG56D software.
> Sent from my Verizon Wireless BlackBerry
>
> -----Original Message-----
> From: "Dick" <w1ksz@...>
> Date: Sat, 27 Mar 2010 20:30:44
> To: <radio-programming@yahoogroups.com>
> Subject: [radio-prog@yhgrps] KW TK-760HG Software
>
> IIRC, this model requires different software. Can someone tell
> me which one I need ?
>
> Thanks, Dick, W1KSZ
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Community email addresses:
>   Post message: radio-programming@yahoogroups.com
>   Subscribe:    radio-programming-subscribe@yahoogroups.com
>   Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
>   List owner:   radio-programming-owner@yahoogroups.com
>
> Shortcut URL to this page:
>   http://www.yahoogroups.com/community/radio-programmingYahoo! Groups Links
>
>
>


[Non-text portions of this message have been removed]

For TK760HG you need KPG56D software.
Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: "Dick" <w1ksz@...>
Date: Sat, 27 Mar 2010 20:30:44
To: <radio-programming@yahoogroups.com>
Subject: [radio-prog@yhgrps] KW TK-760HG Software

IIRC, this model requires different software. Can someone tell
me which one I need ?

Thanks, Dick, W1KSZ






[Non-text portions of this message have been removed]

I could be wrong , but i think you have a bad copy  that has been around for
many years.

Dave.

--- On Sat, 27/3/10, stumpy <larry.stokes@...> wrote:


From: stumpy <larry.stokes@...>
Subject: [radio-prog@yhgrps] p210
To: radio-programming@yahoogroups.com
Date: Saturday, 27 March, 2010, 15:32


 



hi all im trying to load the p210 programming software to my old pc and when it
tries to load it up a message pop up saying [program to big for memory] what am
i doing wrong thanks larry



 




[Non-text portions of this message have been removed]

hi all im trying to load the p210 programming software to my old pc and when it
tries to load it up a message pop up saying [program to big for memory] what am
i doing wrong thanks larry

IIRC, this model requires different software. Can someone tell
me which one I need ?

Thanks, Dick, W1KSZ

Hi there, does anybody have good copies of the circuit diagrams for this radio?
Thanks Graham.

then 2.02 should work then....am i right




________________________________
From: Tim Batt <kd0ezq@...>
To: radio-programming@yahoogroups.com
Sent: Sat, March 27, 2010 12:11:53 PM
Subject: Re: [radio-prog@yhgrps] news cps for a mcs2000

 
The newest and last edition of MCS was 2.03

Tim Batt
KD0EZQ
Mobile Radio Tech 1
Victoria, Kansas

____________ _________ _________ __
From: Woody <roadman46@yahoo. com>
To: radio-programming@ yahoogroups. com
Sent: Sat, March 27, 2010 9:39:24 AM
Subject: [radio-prog@ yhgrps] news cps for a mcs2000

was given a mcs2000 vhf and it has a firmware of 5.5 I was told that the 2.02
program software would not work so I'm looking a new verion of this software
..can any one tell me if this ture..or do i need the newer software....
.thanks..

[Non-text portions of this message have been removed]







[Non-text portions of this message have been removed]

The newest and last edition of MCS was 2.03

Tim Batt
KD0EZQ
Mobile Radio Tech 1
Victoria, Kansas





________________________________
From: Woody <roadman46@...>
To: radio-programming@yahoogroups.com
Sent: Sat, March 27, 2010 9:39:24 AM
Subject: [radio-prog@yhgrps] news cps for a mcs2000


was given a mcs2000 vhf and it has a firmware of 5.5 I was told that the 2.02
program software would not work so I'm looking a new verion of this software
..can any one tell me if this ture..or do i need the newer software....
.thanks..




[Non-text portions of this message have been removed]

was given a mcs2000 vhf and it has a firmware of 5.5 I was told that the 2.02
program software would not work so I'm looking a new verion of this software
..can any one tell me if this ture..or do i need the newer software.....thanks..

Looking for direction on locating a dos copy of P200 UHF programming
software.  Unable to locate the VHF/UHF verison, only the LB one.

Thanks,

Jim

www.bootdisk.com


--- In radio-programming@yahoogroups.com, "stumpy" <larry.stokes@...> wrote:
>
> hi all can any one send me a copy off dos thanks laz
>

Good site!

Well found

Mike


-----Original Message-----
From: radio-programming@yahoogroups.com
[mailto:radio-programming@yahoogroups.com] On Behalf Of Kevin B
Sent: 27 March 2010 08:23
To: radio-programming@yahoogroups.com
Subject: [radio-prog@yhgrps] Re: dos

Try here:

http://www.allbootdisks.com/

Kevin
Kc7hgn

--- In radio-programming@yahoogroups.com, "stumpy" <larry.stokes@...> wrote:
>
> hi all can any one send me a copy off dos thanks laz
>




------------------------------------

Community email addresses:
   Post message: radio-programming@yahoogroups.com
   Subscribe:    radio-programming-subscribe@yahoogroups.com
   Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
   List owner:   radio-programming-owner@yahoogroups.com

Shortcut URL to this page:
   http://www.yahoogroups.com/community/radio-programmingYahoo! Groups Links

Try here:

http://www.allbootdisks.com/

Kevin
Kc7hgn

--- In radio-programming@yahoogroups.com, "stumpy" <larry.stokes@...> wrote:
>
> hi all can any one send me a copy off dos thanks laz
>

Any one out there that would have the TK 3202 software as i need it 2 program
some unit any help would be great full you can e email me off the list at
tokerman@... thanks for the help

[Non-text portions of this message have been removed]