the kenwood pdf says the frequency range is 406-450mhz on a tk380-3

--- In radio-programming@yahoogroups.com, "Patrick Patterson" <vrc-repair@...>
wrote:
>
> I have programmed these radios for ham and it works great.... the software
gives an error but the radio should take the programming. I am using KPG-49D
software.
> Patrick N5SLI
>
>   ----- Original Message -----
>   From: william4472
>   To: radio-programming@yahoogroups.com
>   Sent: Saturday, December 26, 2009 6:06 PM
>   Subject: [radio-prog@yhgrps] Can anyone tell me the frequency range of a
TK380 -3? looking for KPG60D S/W
>
>
>
>   Hi, I have just been given a TK380 -3 + charger, can anybody please tell me
the freq range of this set as a licensed ham I would like to use it on the 430 -
440 band if possible. I have been trying to program the set using KPG49D S/W,
the set will not accept this s/w, I think I read somewhere that it will require
KPG60D s/w as the set is used in the UK, is this correct? if so does anybody
have a copy they could mail me, I am prepared to swap s/w. It seems a shame to
scrap what appears to be a high end PMR handy.
>   Thanks for your time.
>   Bill
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

If you can se your way in emailing it to me as well would be great full my email
is tokerman@...  thanks very kindly
   ----- Original Message -----
   From: Brian Martin
   To: radio-programming@yahoogroups.com
   Sent: Sunday, December 27, 2009 8:29 AM
   Subject: Re: [radio-prog@yhgrps] Re: Astro CPS R05.03.00



   I just downloaded the new CPS R05.03.00 from MOL. This is the current version.

   --- On Sun, 12/27/09, wa6pmw <bill.moulton@...> wrote:

   From: wa6pmw <bill.moulton@...>
   Subject: [radio-prog@yhgrps] Re: Astro CPS R05.03.00
   To: radio-programming@yahoogroups.com
   Date: Sunday, December 27, 2009, 4:13 PM



   Could I get this file as well?

   --- In radio-programming@ yahoogroups. com, "ki6aev" <ki6aev@...> wrote:
   >
   > Looking for the latest version of Astro CPS for the Astro Saber, XTS3000,
etc. I guess this would be version R05.03.00 or is there a more current version?
Please email me of list if you can help. Thanks and Merry Christmas.
   >

   [Non-text portions of this message have been removed]






------------------------------------------------------------------------------



   No virus found in this incoming message.
   Checked by AVG - www.avg.com
   Version: 8.5.431 / Virus Database: 270.14.122/2590 - Release Date: 12/28/09
07:16:00


[Non-text portions of this message have been removed]

I'm looking to make a repeater out of 2 mcs2000's. They will be a cross-band
setup. Does anyone know if this has been done or is possible? Any info will
help.

Thanks
Andy





[Non-text portions of this message have been removed]

I have programmed these radios for ham and it works great.... the software gives
an error but the radio should take the programming. I am using KPG-49D software.
Patrick N5SLI

   ----- Original Message -----
   From: william4472
   To: radio-programming@yahoogroups.com
   Sent: Saturday, December 26, 2009 6:06 PM
   Subject: [radio-prog@yhgrps] Can anyone tell me the frequency range of a TK380
-3? looking for KPG60D S/W



   Hi, I have just been given a TK380 -3 + charger, can anybody please tell me
the freq range of this set as a licensed ham I would like to use it on the 430 -
440 band if possible. I have been trying to program the set using KPG49D S/W,
the set will not accept this s/w, I think I read somewhere that it will require
KPG60D s/w as the set is used in the UK, is this correct? if so does anybody
have a copy they could mail me, I am prepared to swap s/w. It seems a shame to
scrap what appears to be a high end PMR handy.
   Thanks for your time.
   Bill





[Non-text portions of this message have been removed]

Hi all, looking for programming software for, EADS connexity digital mobile
radio, thanks

Does anyone have HT600 , STX, and Spectra software? Thanks A Lot!!

[Non-text portions of this message have been removed]

Hey all, I'm needing the latest s/w for the  Motorola HT1550 XLS. If anyone can
help, please do. Thanks.

https://businessonline.motorola.com/Login.aspx?error=NoLogin1&ReturnUrl=/default\
.asp

--- On Sun, 12/27/09, Brian Martin <hortonandgregory@...> wrote:


From: Brian Martin <hortonandgregory@...>
Subject: Re: [radio-prog@yhgrps] Re: Astro CPS R05.03.00
To: radio-programming@yahoogroups.com
Date: Sunday, December 27, 2009, 5:22 PM


 



Its a secure site. We use it because we have a system. You have to have a login
and password. You don't want to use a federal govt login and get caught.

--- On Sun, 12/27/09, km3dr@verizon. net <km3dr@verizon. net> wrote:

From: km3dr@verizon. net <km3dr@verizon. net>
Subject: Re: [radio-prog@ yhgrps] Re: Astro CPS R05.03.00
To: radio-programming@ yahoogroups. com
Date: Sunday, December 27, 2009, 4:38 PM

 

Can you send me the link as well. I would like a copy.
Thank you.
Lee
Sent from my BlackBerry® smartphone with Nextel Direct Connect

-----Original Message-----
From: Brian Martin <hortonandgregory@ att.net>
Date: Sun, 27 Dec 2009 08:29:34
To: <radio-programming@ yahoogroups. com>
Subject: Re: [radio-prog@ yhgrps] Re: Astro CPS R05.03.00

I just downloaded the new CPS R05.03.00 from MOL. This is the current version.

--- On Sun, 12/27/09, wa6pmw <bill.moulton@ verizon.net> wrote:

From: wa6pmw <bill.moulton@ verizon.net>
Subject: [radio-prog@ yhgrps] Re: Astro CPS R05.03.00
To: radio-programming@ yahoogroups. com
Date: Sunday, December 27, 2009, 4:13 PM

 

Could I get this file as well?

--- In radio-programming@ yahoogroups. com, "ki6aev" <ki6aev@...> wrote:
>
> Looking for the latest version of Astro CPS for the Astro Saber, XTS3000, etc.
I guess this would be version R05.03.00 or is there a more current version?
Please email me of list if you can help. Thanks and Merry Christmas.
>

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]








[Non-text portions of this message have been removed]

Its a secure site. We use it because we have a system. You have to have a login
and password. You don't want to use a federal govt login and get caught.

--- On Sun, 12/27/09, km3dr@... <km3dr@...> wrote:


From: km3dr@... <km3dr@...>
Subject: Re: [radio-prog@yhgrps] Re: Astro CPS R05.03.00
To: radio-programming@yahoogroups.com
Date: Sunday, December 27, 2009, 4:38 PM


 



Can you send me the link as well. I would like a copy.
Thank you.
Lee
Sent from my BlackBerry® smartphone with Nextel Direct Connect

-----Original Message-----
From: Brian Martin <hortonandgregory@ att.net>
Date: Sun, 27 Dec 2009 08:29:34
To: <radio-programming@ yahoogroups. com>
Subject: Re: [radio-prog@ yhgrps] Re: Astro CPS R05.03.00

I just downloaded the new CPS R05.03.00 from MOL. This is the current version.

--- On Sun, 12/27/09, wa6pmw <bill.moulton@ verizon.net> wrote:


From: wa6pmw <bill.moulton@ verizon.net>
Subject: [radio-prog@ yhgrps] Re: Astro CPS R05.03.00
To: radio-programming@ yahoogroups. com
Date: Sunday, December 27, 2009, 4:13 PM


 



Could I get this file as well?

--- In radio-programming@ yahoogroups. com, "ki6aev" <ki6aev@...> wrote:
>
> Looking for the latest version of Astro CPS for the Astro Saber, XTS3000, etc.
I guess this would be version R05.03.00 or is there a more current version?
Please email me of list if you can help. Thanks and Merry Christmas.
>








[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]








[Non-text portions of this message have been removed]

Can you send me the link as well.  I would like a copy.
Thank you.
Lee
Sent from my BlackBerry® smartphone with Nextel Direct Connect

-----Original Message-----
From: Brian Martin <hortonandgregory@...>
Date: Sun, 27 Dec 2009 08:29:34
To: <radio-programming@yahoogroups.com>
Subject: Re: [radio-prog@yhgrps] Re: Astro CPS  R05.03.00

I just downloaded the new CPS R05.03.00 from MOL. This is the current version.

--- On Sun, 12/27/09, wa6pmw <bill.moulton@...> wrote:


From: wa6pmw <bill.moulton@...>
Subject: [radio-prog@yhgrps] Re: Astro CPS R05.03.00
To: radio-programming@yahoogroups.com
Date: Sunday, December 27, 2009, 4:13 PM


 



Could I get this file as well?

--- In radio-programming@ yahoogroups. com, "ki6aev" <ki6aev@...> wrote:
>
> Looking for the latest version of Astro CPS for the Astro Saber, XTS3000, etc.
I guess this would be version R05.03.00 or is there a more current version?
Please email me of list if you can help. Thanks and Merry Christmas.
>








[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

I just downloaded the new CPS R05.03.00 from MOL. This is the current version.

--- On Sun, 12/27/09, wa6pmw <bill.moulton@...> wrote:


From: wa6pmw <bill.moulton@...>
Subject: [radio-prog@yhgrps] Re: Astro CPS R05.03.00
To: radio-programming@yahoogroups.com
Date: Sunday, December 27, 2009, 4:13 PM


 



Could I get this file as well?

--- In radio-programming@ yahoogroups. com, "ki6aev" <ki6aev@...> wrote:
>
> Looking for the latest version of Astro CPS for the Astro Saber, XTS3000, etc.
I guess this would be version R05.03.00 or is there a more current version?
Please email me of list if you can help. Thanks and Merry Christmas.
>








[Non-text portions of this message have been removed]

Could I get this file as well?

--- In radio-programming@yahoogroups.com, "ki6aev" <ki6aev@...> wrote:
>
> Looking for the latest version of Astro CPS for the Astro Saber, XTS3000, etc.
I guess this would be version R05.03.00 or is there a more current version? 
Please email me of list if you can help.  Thanks and Merry Christmas.
>

Thanks for all your input.
The reason I bought the new fm transmitter was to replace an older one ( about
25 years old) ,the older one still worked well, but I figured it would pack it
in soon. What disappointed me, was that the older transmitter seemed to transmit
a stereo signal a lot further than the new one despite being only half the
power. I have contacted the manufacturer several times, but it is difficult
dealing with them since they live in Isreal.
So, how does one check whether one has a the correct pilot signal level?
Thanks for your help.
Mike

[Non-text portions of this message have been removed]

If anyone has Icom 2800 software please email me direct. I can't find it
anywhere. Thanks in advance!!!!

[Non-text portions of this message have been removed]

a -3 radio is 400-430 mhz.  It might be possible to go a little high.
Might have to adjust the vco tuning to lock.

I use a -1 450-490 down to 440

Frank


[Non-text portions of this message have been removed]

Hi Chris,

Start the program with this DOS command: ce22 -p
That's "ce22 space dash p"

Program opens as normal, but when you press F2 you get the common data screen
with the highlighter positioned on the PTT1 State item.  The arrow keys move the
highlighter about the window and the spacebar toggles settings.

I'm trying this out on v2.10, which behaves the same in that respect as v2.00. 
Should work for you.

73 de David, N6HHR



--- In radio-programming@yahoogroups.com, "possum777" <chrisd@...> wrote:
>
> I am almost there. I am programming the UHF Vertex VXR-1000 vehicular
repeater. Got all the frequencies/PL's  programmed but cannot select the common
data parameters (PTT1 and PTT2 state, Pre-emphasis etc). Yes, I have tried the
"-p" option but still cannot get the Common Data screen to allow me to move
fields with keyboard arrows. Stuck on COM Port field. I have CE22 version 2.00
software. Anyone have experience? tricks, solution. ?
>
> Thanks,
>
>  Chris
>

I have the A9 Head. Just program what buttons you want to use in the head setup
for buttons.  I have the siren enabled but I pulled the button off..


Kd7jvc







________________________________
From: ka9qjg <KA9QJG@...>
To: radio-programming@yahoogroups.com
Sent: Sat, December 26, 2009 12:04:25 PM
Subject: RE: [radio-prog@yhgrps] Spectra Siren question




Thanks for Posting this I have the Same  Question about the X9000 I don't
trust my Grandkids  and would like to be able to just use the Air Horn and
Radio out /PA

Happy Holidays

Don KA9QJG

Is there a place in the codeplug that you can hack to allow the Airhorn but
disallow the full siren?

I know there is ON / OFF for siren that allows the PA to work, but, having
the air horn feature would be nice when the siren is disabled..

Thanks,

Wolfy

[Non-text portions of this message have been removed]







[Non-text portions of this message have been removed]

ok i just got a dirt cheep Visar Trunk radio off of ebay at a dirt cheep price
now i would like to program some freq or trunk system into it but it happens
that the visar softwere i have wont work with this radio any out there have the
softwere in ZIP format can e-mail it to me directly ? tnx again




[Non-text portions of this message have been removed]

Go here, http://www.fcc.gov/oet/ea/fccid/, and type in the FCC ID and it
will usually tell you the frequency range.

Jeff

----- Original Message -----
From: "william4472" <mr.bill.roberts@...>
To: <radio-programming@yahoogroups.com>
Sent: Saturday, December 26, 2009 7:06 PM
Subject: [radio-prog@yhgrps] Can anyone tell me the frequency range of a
TK380 -3? looking for KPG60D S/W


> Hi, I have just been given a TK380 -3 + charger, can anybody please tell
> me the freq range of this set as a licensed ham I would like to use it on
> the 430 - 440 band if possible. I have been trying to program the set
> using KPG49D S/W, the set will not accept this s/w, I think I read
> somewhere that it will require KPG60D s/w as the set is used in the UK, is
> this correct? if so does anybody have a copy they could mail me, I am
> prepared to swap s/w. It seems a shame to scrap what appears to be a high
> end PMR handy.
> Thanks for your time.
> Bill
>
>
>
> ------------------------------------
>
> Community email addresses:
>  Post message: radio-programming@yahoogroups.com
>  Subscribe:    radio-programming-subscribe@yahoogroups.com
>  Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
>  List owner:   radio-programming-owner@yahoogroups.com
>
> Shortcut URL to this page:
>  http://www.yahoogroups.com/community/radio-programmingYahoo! Groups Links
>
>
>

Hi, I have just been given a TK380 -3 + charger, can anybody please tell me the
freq range of this set as a licensed ham I would like to use it on the 430 - 440
band if possible. I have been trying to program the set using KPG49D S/W, the
set will not accept this s/w, I think I read somewhere that it will require
KPG60D s/w as the set is used in the UK, is this correct? if so does anybody
have a copy they could mail me, I am prepared to swap s/w. It seems a shame to
scrap what appears to be a high end PMR handy.
Thanks for your time.
Bill

After installing the driver for the USB-to-serial converter built into
the cord go to system> hardware> device manager> view> show hidden
devices> ports. Make sure your ribless usb to serial cable is set to
the same COM port number as your motorola software. (COM1 or COM2)

If that fails try genuine motorola cables and a rib, or at least a
serial aftermarket cable.

I have seen the airhorn feature of a siren control box connected to
the horn ring in the steering wheel to "replace" the stock horn. You
could consider doing that and somehow concealing the siren control if
it's possible with your model..

I fiqured it probably is a problem with the program cable but I wanted to throw
the information out there to see if anyone else came up with any other
information

--- In radio-programming@yahoogroups.com, "Eric Lemmon" <wb6fly@...> wrote:
>
> Willy,
>
> The CP200 and the PR400 use the same software (RVN4191) and the same cable
> (AAPMKN4004) for programming.  The factory cable is a serial cable, not a
> USB cable.  Many aftermarket cables have wide-tolerance resistors for
> creating the bias voltage going to the radio, and may not work with all
> radios- and may not work at all.  Try using a Motorola RIB and cable to see
> if that works.
>
> 73, Eric Lemmon WB6FLY
>
>
> -----Original Message-----
> From: radio-programming@yahoogroups.com
> [mailto:radio-programming@yahoogroups.com] On Behalf Of Matthew
> Sent: Friday, December 25, 2009 4:46 PM
> To: radio-programming@yahoogroups.com
> Subject: [radio-prog@yhgrps] Motorola cp200 pr400 program issues
>
>
>
> I have the CPS program R05.05 and a USB program cable. I am trying to
> program a pr400. When I plug in the cable it will not read the radio. Can
> anyone help me I have no idea what do to to fix this thing
>
> thanks
> willy
>

You can run the air horn when the siren is not active, just assign the
AH feature to a button.



G.H. Lang wrote:
>
>
> Is there a place in the codeplug that you can hack to allow the
> Airhorn but
> disallow the full siren?
>
> I know there is ON / OFF for siren that allows the PA to work, but, having
> the air horn feature would be nice when the siren is disabled..
>
> Thanks,
>
> Wolfy
>
> [Non-text portions of this message have been removed]
>
>


[Non-text portions of this message have been removed]

I would like to have it as well.
Thank You
Tom
   ----- Original Message -----
   From: Will Ross
   To: radio-programming@yahoogroups.com
   Sent: Saturday, December 26, 2009 10:11 AM
   Subject: RE: [radio-prog@yhgrps] Astro CPS R05.03.00



   if you dont mind me also thanks

   --- On Sat, 12/26/09, Randy Byer <rbyer@...> wrote:

   From: Randy Byer <rbyer@...>
   Subject: RE: [radio-prog@yhgrps] Astro CPS R05.03.00
   To: radio-programming@yahoogroups.com
   Date: Saturday, December 26, 2009, 2:53 PM



   Any chance I could get that url as well thanks in advance.

   From: radio-programming@ yahoogroups. com
   [mailto:radio-programming@ yahoogroups. com] On Behalf Of Andrew Crawford
   Sent: Friday, December 25, 2009 4:05 PM
   To: radio-programming@ yahoogroups. com
   Subject: Re: [radio-prog@ yhgrps] Astro CPS R05.03.00

   Im uploading it to mediafire now, it should be ready to download in
   about 20 mins, Ill send you the URL then.

   ki6aev wrote:
   >
   >
   > Looking for the latest version of Astro CPS for the Astro Saber,
   > XTS3000, etc. I guess this would be version R05.03.00 or is there a
   > more current version? Please email me of list if you can help. Thanks
   > and Merry Christmas.
   >
   >

   [Non-text portions of this message have been removed]

   _____

   I am using the Free version of SPAMfighter <http://www.spamfigh ter.com/len>
   .
   We are a community of 6 million users fighting spam.
   SPAMfighter has removed 8310 of my spam emails to date.
   The Professional version does not have this message.

   [Non-text portions of this message have been removed]

   [Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]

Thanks for Posting this I have the Same  Question about the X9000 I don't
trust my Grandkids  and would like to be able to just use the Air Horn and
Radio out /PA



Happy Holidays



Don KA9QJG



Is there a place in the codeplug that you can hack to allow the Airhorn but
disallow the full siren?

I know there is ON / OFF for siren that allows the PA to work, but, having
the air horn feature would be nice when the siren is disabled..

Thanks,

Wolfy








[Non-text portions of this message have been removed]

Is there a place in the codeplug that you can hack to allow the Airhorn but
disallow the full siren?

I know there is ON / OFF for siren that allows the PA to work, but, having
the air horn feature would be nice when the siren is disabled..

Thanks,

Wolfy



[Non-text portions of this message have been removed]

These radios use an internal 2716 or 2732 eprom for program.
Need to open the radio & pull out the eprom.
Typically you would use the Standard programmer to blow the chips.
May be able to use a programmer that will read & write to a 2716 or 2732 eprom.
Also found this fellow who burns eproms.
http://home.cogeco.ca/~rodemi/Forsale/Itemstosell.html

GMRSINC

--- In radio-programming@yahoogroups.com, "Sylvain(Yahoo)" <syl_dussureault@...>
wrote:
>
> Ok It would be useful because I got two radio UHF and I'll like to change the
frequencies.   I found on the web the software GX3000 but I can't connect to the
radio.
>   _____
>
> De : radio-programming@yahoogroups.com
> [mailto:radio-programming@yahoogroups.com] De la part de Yahoo
> Envoyé : 22 décembre 2009 16:33
> À : radio-programming@yahoogroups.com
> Objet : RE: [radio-prog@yhgrps] need info for Standard HX400u
>
> The radio uses a Standard standalone EPROM programmer. Someone has written an
external program so you can use a standard EPROM programmer but can't remember
who.
>
> Jeff
>
> -----Original Message-----
> From: radio-programming@ <mailto:radio-programming%40yahoogroups.com>
Sent: Thursday, December 24, 2009 12:18 PM
> Subject: [radio-prog@yhgrps] need info for Standard HX400u
> I just want to know whaT i need to program it, mean the type of cable and the
name of the software.
>
> Thanks
> Merry Christmas
> Sylvain

To swap information about programming two-way radio equipment and enabling
options that aren't commonly known about. Focusing o
   The gx3000 and gx400 use the same eprom programming. The former is a 40watt
mobile, the latter a handheld.
   Robert Purvis, VE3INY wrote a small hex calculator program that if you input
the tx and rx frequencies it will spit out the appropriate hex code to put in
the eprom. The eprom used is a 2716.Bob also has a lot of info about how to mod
the gx3000 to use for ham apps.
   There is a gx3000 user group in yahoogroups with some info on it.
   Mike VE7SML

[Non-text portions of this message have been removed]

if you dont mind me also thanks

--- On Sat, 12/26/09, Randy Byer <rbyer@...> wrote:


From: Randy Byer <rbyer@...>
Subject: RE: [radio-prog@yhgrps] Astro CPS R05.03.00
To: radio-programming@yahoogroups.com
Date: Saturday, December 26, 2009, 2:53 PM


 



Any chance I could get that url as well thanks in advance.

From: radio-programming@ yahoogroups. com
[mailto:radio-programming@ yahoogroups. com] On Behalf Of Andrew Crawford
Sent: Friday, December 25, 2009 4:05 PM
To: radio-programming@ yahoogroups. com
Subject: Re: [radio-prog@ yhgrps] Astro CPS R05.03.00

Im uploading it to mediafire now, it should be ready to download in
about 20 mins, Ill send you the URL then.

ki6aev wrote:
>
>
> Looking for the latest version of Astro CPS for the Astro Saber,
> XTS3000, etc. I guess this would be version R05.03.00 or is there a
> more current version? Please email me of list if you can help. Thanks
> and Merry Christmas.
>
>

[Non-text portions of this message have been removed]

_____

I am using the Free version of SPAMfighter <http://www.spamfigh ter.com/len>
.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 8310 of my spam emails to date.
The Professional version does not have this message.

[Non-text portions of this message have been removed]











[Non-text portions of this message have been removed]