snip....

thank you for giving us a 303K down load that we didn't really want.

surely it would have been easier to upload it to the files page of the
egroups so if any one did want it they could have d-loaded it themselves
instead of subject everyone to a large down load ....

Derrick@...

Thanks to all that replied. I figured out the problem.

Thanks again,

Mike

gday mike try this s/w   unkown if it works but hope it helps

happy new year d&j

RPS Systems wrote:

> Does anyone know the GE part number of the programming software for
> M-PD conventional radio's? I've got a couple that need to be
> programmed, and what I have isn't working...
>
> Thanks,
>
> Mike
>
>
> Community email addresses:
>   Post message: radio-programming@onelist.com
>   Subscribe:    radio-programming-subscribe@onelist.com
>   Unsubscribe:  radio-programming-unsubscribe@onelist.com
>   List owner:   radio-programming-owner@onelist.com
>
> Shortcut URL to this page:
>   http://www.onelist.com/community/radio-programming

Looks like it is TQ3312.
Dean
----- Original Message -----
From: RPS Systems <rpssystems@...>
To: Radio-Prog <radio-programming@egroups.com>
Sent: Friday, December 29, 2000 4:21 PM
Subject: [radio-prog@onelist] MPD Conventional


> Does anyone know the GE part number of the programming software for
> M-PD conventional radio's? I've got a couple that need to be
> programmed, and what I have isn't working...
>
> Thanks,
>
> Mike
>
>
>
> Community email addresses:
>   Post message: radio-programming@onelist.com
>   Subscribe:    radio-programming-subscribe@onelist.com
>   Unsubscribe:  radio-programming-unsubscribe@onelist.com
>   List owner:   radio-programming-owner@onelist.com
>
> Shortcut URL to this page:
>   http://www.onelist.com/community/radio-programming
>
>

Does anyone know the GE part number of the programming software for
M-PD conventional radio's? I've got a couple that need to be
programmed, and what I have isn't working...

Thanks,

Mike

I'm looking for info on how to take a Radius P100 UHF portable down
into the ham bands.  The radios I have are 450-460 split.  Batlabs
info says that the codeplug files are in ASCII, but when I opened one
up, I found that's not the case.  I'd really like to use these units
as linking radios if I can find a way to get the frequencies
programmed.

Thanks,
Brian

I need help programming the following radio Maxtrac 800 Trunking
Model: D45MQA5GB5AK. I have an RIB box, PC to RIB, and RIB to
Maxtrac. cable. What else do I need to program it, and where can I
find it?

Thanks A lot
-Robert Foster

--- In radio-programming@egroups.com, Kevin Fennessy <phen440@h...>
wrote:
> Good afternoon averybody,
> does anybody out there make motorola rib boxes? I am in need of one
but
> the lowest price i can find is about $75.00! if anyone builds them
and
> has them cheaper send me back a e-mail. phen440@h...
> thanks so much
> kevin

try   http://www.batlabs.com/

reg. john

G'Day and how'z things going???

I'm chasing either a programming interface lead or schematic of one
to programme the Tait Orca Elan Portable if anyone could help
please???

THANKS & CHEERS!!!

Can Someone help me in identifing what all the connections on the VHF
Maratrac Hand-Held Control Head's connectors are on the second cable coming
from the radio are. i would like to use any other options if possibe and also
which one is the ground so i can use the RX PL's to limit interfence.
Thanks Again
Micheal

i have a top display mt2000 that is 48 ch. three zones 16ch per
zone .in the rss i can add hundreds of channels but there is no way
to switch more than three zones. any way i just got a mtsx front
cover with full keypad in the lab rss i can add all the extra keys
and change options to front display but it still don't work


can anybody help

Anyone have any Nextel software for trade?

Maybe try   http://www.hackersrussia.ru/radio/radio.htm

Andrew



> I have a Marconi DP240 UHF 16 channel HT and a Fujitsu FTM15-3556AT
> Vhf mobile that I need programmed. I can program most Motorola and GE
> radio's but these two I am finding trouble just finding info on.
> Dean
>
>
>
> Community email addresses:
>   Post message: radio-programming@onelist.com
>   Subscribe:    radio-programming-subscribe@onelist.com
>   Unsubscribe:  radio-programming-unsubscribe@onelist.com
>   List owner:   radio-programming-owner@onelist.com
>
> Shortcut URL to this page:
>   http://www.onelist.com/community/radio-programming

Hi all,

trying to find a copy of the RSS for an xts 3000
motorola ??????

any idea's


Thanks

Col

_____________________________________________________________________________
http://au.yahoo.com/shopping/giftguide/christmas/jumppage.html - Yahoo! Gift
Guides
- Looking for inspiration?

I have a Marconi DP240 UHF 16 channel HT and a Fujitsu FTM15-3556AT
Vhf mobile that I need programmed. I can program most Motorola and GE
radio's but these two I am finding trouble just finding info on.
Dean

Hello everyone and thank you for reading this,
I just purchased a new VHF M1225 and went to program it with my 1225
Series RSS Version R02.00.00, Cable, and Rib and got the error: the
version of software in your radio is not supported. You may not
proceed. Does any one have the newest version of software? I would
greatly appreciated it.
Thanks in advance, BE

these may also be useful
regards dave

rpssystems@... wrote:

> Does anyone have any info on the cable needed to program Maxon SM-
> 4450 mobiles? I think I have the correct software, but I need to get
> the cable. Any help would be appreciated.
>
> Thanks,
>
> Rob
>
>
> Community email addresses:
>   Post message: radio-programming@onelist.com
>   Subscribe:    radio-programming-subscribe@onelist.com
>   Unsubscribe:  radio-programming-unsubscribe@onelist.com
>   List owner:   radio-programming-owner@onelist.com
>
> Shortcut URL to this page:
>   http://www.onelist.com/community/radio-programming

look at this place it is a useful site
http://krasnodar.online.ru/hamradio/sch_eng.html

regards  dave

rpssystems@... wrote:

> Does anyone have any info on the cable needed to program Maxon SM-
> 4450 mobiles? I think I have the correct software, but I need to get
> the cable. Any help would be appreciated.
>
> Thanks,
>
> Rob
>
>
> Community email addresses:
>   Post message: radio-programming@onelist.com
>   Subscribe:    radio-programming-subscribe@onelist.com
>   Unsubscribe:  radio-programming-unsubscribe@onelist.com
>   List owner:   radio-programming-owner@onelist.com
>
> Shortcut URL to this page:
>   http://www.onelist.com/community/radio-programming

Does anyone have any info on the cable needed to program Maxon SM-
4450 mobiles? I think I have the correct software, but I need to get
the cable. Any help would be appreciated.

Thanks,

Rob

Same here.

At 12:02 AM 12/10/2000, you wrote:
>I'd like to see your diagram.
>
>----- Original Message -----
>From: Anthony Szablowski <aszablowski@...>
>To: <radio-programming@egroups.com>
>Sent: Sunday, December 10, 2000 12:03 PM
>Subject: Re: [radio-prog@onelist] Digest Number 208
>
>
> > I've built my own RIB circuit, not the one from Batlabs,
> >using +5V powered, dual RS-232 Tx/Rx chip

_______________________________________________
Why pay for something you could get for free?
NetZero provides FREE Internet Access and Email
http://www.netzero.net/download/index.html

hi
i need programs and inteface for maxon
10q jb

Looking for a Relm PCKIT030 program kit to program several radios I
traded for.  Anyone have one for sale?  If so let me know how much
you want for it.  Thanks, JR Hunt.

Hello.  I think this question has been posted recently.  Your question is
like asking if you can carry a piano in your Ford.  Is it a car or a truck,
a big truck or a little truck?  What we need is the model number and even
the start of the S/N.   I don't know of any 'low band' Ritrons, but that is
not to say that they never did or did not make any.  I owned a two-way
radio business for over 30 years and would not even work on them.  The
quality was very poor and the factory was no help either.  They could not
fix them.  Don't put too much money in one of them.  I won't have your
answer, but maybe my thoughts will elicit a response from someone else for
you.  Larry W9HTK



At 06:09 AM 12/20/2000 -0500, you wrote:
>Anyone know if a Ritron can be programmed to work on 6 meters. Also can
>this unit be programmed without using a computer.
>
>Thanks........
>
>
>Community email addresses:
>  Post message: radio-programming@onelist.com
>  Subscribe:    radio-programming-subscribe@onelist.com
>  Unsubscribe:  radio-programming-unsubscribe@onelist.com
>  List owner:   radio-programming-owner@onelist.com
>
>Shortcut URL to this page:
>  http://www.onelist.com/community/radio-programming
>
>
>

Anyone know if a Ritron can be programmed to work on 6 meters. Also can
this unit be programmed without using a computer.

Thanks........

Hello gang, I recently aquired a Uniden SMS935 radio, can anybody
give me any info on it such as what it takes to program, what band it
is, any mods for it

Thanks
Steve

Has anyone used a Scholer- Johnson LTR board set up as a  conventional
add on, to gain more channels on a Motorola M1225 mobile ?


Thanks, Jim

Dan,

There is a jumper inside the radio which allows for programming
directly to the radio EEPROM via cable and pc software, or the EEPROM
can be removed. Also this jumper controls the availabilty for the
control head to download the frequencies to the EEPROM. Also you MUST
have a downloading cable (from control head to the radio).

I can help you out more if you send an email to me. I do have the
manuals for this radio, and I have the EEPROM programmer, and
software.

Email: Radio@...
http://www.geocities.com/unlimitedcomm

Thanks,
Mark


-- In radio-programming@egroups.com, "Dan Dawson" <dawson1975@h...>
wrote:
> HELLO ALL!!!,
>         My name is Dan ive got a ? for ya!! Me amd a friend where
trying to program my delta sx for 2 meter operation we were using the
ge 820 controlhead priceelectronics program interface unit and ge
programming software. now here is what happened NOTHING after we
programmed the head and tried it out on the delta it would read
download error .....do you have to use a special cable or is there
some other way of programming these radios besides with the control
head? i have heard you can get a kit that just programs the eeprom is
this true? also if someone knows of anywebsites that give you step by
step instructions on how to program these radios i would be very
happy!!!!
>
> Thanks in advance,
> DAN DAWSON (KC8ONR)
>
> ps first time using these ge radios