I have an account and it was simple for me.... Maybe I got lucky.

Sent from my iPhone


On Nov 29, 2009, at 9:10, maineff@... wrote:

I have an account and it is quite a CHORE to get them to agree to sell you
the lic agreement. Below is the link u need to set up an account. Good
Luck..

_https://businessonline.motorola.com/Login.aspx?error=NoLogin1&ReturnUrl=/de
fault.asp_
(https://businessonline.motorola.com/Login.aspx?error=NoLogin1&ReturnUrl=/defaul\
t.asp)

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

I have the manuals and a copy of the manual already made up. . . I have
about 50 of these radios lying around.

syl_dussureault wrote:
>
>
> I have the RSS for this radio but I don't have any help file that
> suppose to come with, it's like the RSS that I got is not complete.
> Some files are missing..
>
> Anyone has it please!!!!
>
> It's a pain to program it, so it'll help if I hace this help file.
>
> Thanks
>
> VE2JER
> Sylvain
>
>


[Non-text portions of this message have been removed]

Hi All.

I'm looking for the ADMS-2h software for my FT-8900. I lost the original after
the hard drive died.

Thanks in advance.....

Gil

[Non-text portions of this message have been removed]

I did have a newer one I got from someone but my computer crashed so I
don't have it. I have one UHF radio I want to program in gmrs channels
into it

Sent from my iPod

On Nov 28, 2009, at 0:33, Patrick Guyer <whatermelonman@...>
wrote:

> I use CP200's what version do you have currently?
>
> --- On Thu, 11/26/09, shawn shumsky <nyvfdems@...> wrote:
>
> From: shawn shumsky <nyvfdems@...>
> Subject: Re: [radio-prog@yhgrps] Question about P200
> To: radio-programming@yahoogroups.com
> Date: Thursday, November 26, 2009, 10:50 PM
>
>
>
> I have a Moto CP200 UHF im looking for a newer version software can
> someone
>
> please help
>
> On Thu, Oct 15, 2009 at 9:21 PM, Eagle Link Customer Service <
>
> services@eaglelink. net> wrote:
>
> >
>
> >
>
> > Ok, so I got my P200 working finally. Thanks Thomas! Now I have
> what might
>
> > seem like a dumb question but is kind of bugging me.
>
> >
>
> > Why does the P200 have 2 little buttons on the side that both act
> as the
>
> > "unsquelch" function?
>
> >
>
> > I see nothing in the software to change the function of these
> buttons, so
>
> > it
>
> > confuses me why they would put 2 of them if they can't be
> reprogrammed. Do
>
> > I need a different software than what I have to change them? Or did
>
> > Motorola just put an extra button there that is pretty much
> useless on this
>
> >
>
> > model?
>
> >
>
> > Jeff
>
> >
>
> >
>
> >
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>


[Non-text portions of this message have been removed]

The only version I have found was the 1.1

Sent from my iPod

On Nov 28, 2009, at 0:33, Patrick Guyer <whatermelonman@...>
wrote:

> I use CP200's what version do you have currently?
>
> --- On Thu, 11/26/09, shawn shumsky <nyvfdems@...> wrote:
>
> From: shawn shumsky <nyvfdems@...>
> Subject: Re: [radio-prog@yhgrps] Question about P200
> To: radio-programming@yahoogroups.com
> Date: Thursday, November 26, 2009, 10:50 PM
>
>
>
> I have a Moto CP200 UHF im looking for a newer version software can
> someone
>
> please help
>
> On Thu, Oct 15, 2009 at 9:21 PM, Eagle Link Customer Service <
>
> services@eaglelink. net> wrote:
>
> >
>
> >
>
> > Ok, so I got my P200 working finally. Thanks Thomas! Now I have
> what might
>
> > seem like a dumb question but is kind of bugging me.
>
> >
>
> > Why does the P200 have 2 little buttons on the side that both act
> as the
>
> > "unsquelch" function?
>
> >
>
> > I see nothing in the software to change the function of these
> buttons, so
>
> > it
>
> > confuses me why they would put 2 of them if they can't be
> reprogrammed. Do
>
> > I need a different software than what I have to change them? Or did
>
> > Motorola just put an extra button there that is pretty much
> useless on this
>
> >
>
> > model?
>
> >
>
> > Jeff
>
> >
>
> >
>
> >
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>


[Non-text portions of this message have been removed]

You don't need a Motorola Online (MOL) account to purchase programming
software- either RSS or CPS- but it is free and you can download any
software and firmware updates once you have a subscription.  To start the
process, simply contact Motorola at 800-422-4210.  You will need to complete
an application form and a license agreement, and provide a list of the radio
serial numbers you want to program.  I have done this several times, and the
entire process takes only a few days- not including postal delays.  The
license covers not just one software, but an entire class of software.  Once
you have been licensed for Professional Series software, you can then
purchase Commercial Series and Infrastructure software over the phone,
without additional paperwork.

What may cause a delay is the obvious suspicion that a person with just one
radio wants an expensive software package that costs almost as much as the
radio, and why?  There may be a perfectly valid reason, such as the radio
owner is 1,000 miles away from the nearest Motorola shop.  However, Motorola
attorneys are kept busy taking some people to court for distributing copies
of current software- which the license agreement specifically prohibits.
You can read the terms of a typical Motorola software license agreement
here:
<www.repeater-builder.com/motorola/rss/rss-sla.pdf>

CPS and RSS subscriptions normally run for three years, and you will receive
free updates every six months or so during the subscription term.

73, Eric Lemmon WB6FLY


-----Original Message-----
From: radio-programming@yahoogroups.com
[mailto:radio-programming@yahoogroups.com] On Behalf Of ki6aev
Sent: Saturday, November 28, 2009 9:27 PM
To: radio-programming@yahoogroups.com
Subject: [radio-prog@yhgrps] Purchasing CPS from Motorola



Has anyone had success in purchasing CPS from Motorola? I recently purchased
an HT1250 and I'll be needing the latest version of the CPS to program it.
I've heard mention of setting up an online account with them but can't seem
to figure out how in browsing their website. Anyone had any luck or
experience with any of this?

I have an account and it is quite a CHORE to get them to agree to sell you
the lic agreement. Below is the link u need to set up an account.  Good
Luck..

_https://businessonline.motorola.com/Login.aspx?error=NoLogin1&ReturnUrl=/de
fault.asp_
(https://businessonline.motorola.com/Login.aspx?error=NoLogin1&ReturnUrl=/defaul\
t.asp)


[Non-text portions of this message have been removed]

anyone in uk, got any dead or cheep prp's

need some backs off a few to build some car chargers for Hope and aids convoy
radios.

Any version a 73, 74 or 76 be fine as long as back and battery contacts ok, not
worried if case or disply knackered, only need the back.

Also looking for working Low band Versions (HSE0)

Ian

2E0IJH

On Behalf Hope and Direct (We take Aid not Sides)

Its possible the copy of the software you are using was set up by some one else
and then has been saved.  So  as you had an directory issues it is possible you
need to select the correct com port..    Most usualy use COM 1   but some are
set to COM 2   .   Just something worth checking.

 
Dave.  UK
--- On Sat, 28/11/09, G.H. Lang <wolfy@...> wrote:


From: G.H. Lang <wolfy@...>
Subject: RE: [radio-prog@yhgrps] HT1000
To: radio-programming@yahoogroups.com
Date: Saturday, 28 November, 2009, 22:10


 



as goofy as this is going to sound, lick the contacts on the radio then
connect the connector and try it...

works about 90 pct the time for me... and take an eraser to the contacts and
make sure they are clean...

_____

From: radio-programming@ yahoogroups. com
[mailto:radio-programming@ yahoogroups. com] On Behalf Of aaronf756
Sent: Saturday, November 28, 2009 10:30 PM
To: radio-programming@ yahoogroups. com
Subject: [radio-prog@ yhgrps] HT1000

Thanks for all of the replies with the RSS i got this one to work However
now on the RSS it is telling me that i have Unsuccessful Rib Port
Communication because of either no rib power, no rib or rib malfunctioning,
poor connection between rib and pc or bad pc card HOWEVER i have been
programming maxtrac's all night and did that one and went back to the
maxtracs and have no issues with those at all using the same rib box and pc,
i even tried a different cable and that's not working any sugestiions






[Non-text portions of this message have been removed]

Well, that's exactly how it worked with mine.

All the ones I have programmed have been series 1 units, except for one,
with a total of 99 channels. It may be different on a series 2 unit although
we have used the same programming on one of those as well.

The series 1 units use the DOS based programming software and the Series 2
used the Windows based software.

73....Eric VK2VE.

-----Original Message-----
From: radio-programming@yahoogroups.com
[mailto:radio-programming@yahoogroups.com] On Behalf Of tunzafartz
Sent: Sunday, 29 November 2009 21:23
To: radio-programming@yahoogroups.com
Subject: Re: [radio-prog@yhgrps] tait 2020 programming

Huh?  Scan groups do NOT take up channel positions.  We have T2020's with
all 100 channels programmed, and then about 8 or so scan groups including
one user-programmable group.

WE normally number them from 101 upwards.  Series 1 or 2.


--- In radio-programming@yahoogroups.com, "Eric van de Weyer" <eric@...>
wrote:
>
> Hi Martin,
>
> Basically, each scan group you want to have takes up one memory channel
> position, so, for instance, if you wanted to have 3 scan groups then you
> would use 3 channel. In mine I started at CH 99 and worked backwards. I
have
> about 4 or 5 scan groups. You can give each a name if you wish.




------------------------------------

Community email addresses:
   Post message: radio-programming@yahoogroups.com
   Subscribe:    radio-programming-subscribe@yahoogroups.com
   Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
   List owner:   radio-programming-owner@yahoogroups.com

Shortcut URL to this page:
   http://www.yahoogroups.com/community/radio-programmingYahoo! Groups Links

This radio has no ctcss change of state ouput (on rear socket)when used as a
base,works ok as rpt with output on rear socket. Any one have a workaround for
this?

Huh?  Scan groups do NOT take up channel positions.  We have T2020's with all
100 channels programmed, and then about 8 or so scan groups including one
user-programmable group.

WE normally number them from 101 upwards.  Series 1 or 2.


--- In radio-programming@yahoogroups.com, "Eric van de Weyer" <eric@...> wrote:
>
> Hi Martin,
>
> Basically, each scan group you want to have takes up one memory channel
> position, so, for instance, if you wanted to have 3 scan groups then you
> would use 3 channel. In mine I started at CH 99 and worked backwards. I have
> about 4 or 5 scan groups. You can give each a name if you wish.

"ki6aev" wrote:
>
> Has anyone had success in purchasing CPS from Motorola?  I recently purchased
an HT1250 and I'll be needing the latest version of the CPS >to program it. 
I've heard mention of setting up an online account >with them but can't seem to
figure out how in browsing their website.  >Anyone had any luck or experience
with any of this?
>

CPS and other item can be purchased from http://businessonline.motorola.com
After you make an account you'll need to call them and have them approve you for
CPS purchases. This will require you to sign their Software Licensing Agreement.

Hope that helps,
Justin W8JKC

hi  eric

thanks for the reply

this is very useful..
will try this later.and will post my results

cheers
martin

--- In radio-programming@yahoogroups.com, "Eric van de Weyer" <eric@...> wrote:
>
> Hi Martin,
>
> Basically, each scan group you want to have takes up one memory channel
> position, so, for instance, if you wanted to have 3 scan groups then you
> would use 3 channel. In mine I started at CH 99 and worked backwards. I have
> about 4 or 5 scan groups. You can give each a name if you wish.
>
> Once you set a channel as a scan group, it then allows you to list the
> channel numbers to be allocated to that scan group. I don't remember at the
> moment whether there is a limit to the number of channels you can have in a
> scan group but I know that you can have a channel in more than one group, in
> fact in every group if you wish.
> I hope that that has cleared up a bit about how scan groups work and you
> will be able to work it out from there. If you are still having problems,
> give me a yell and I'll bring mine up and check the finer details.
>
> Once you have the scan groups selected and programmed in, you just select
> the memory channel and it starts scanning that group.
>
> 73....Eric VK2VE.
>
>
> -----Original Message-----
> From: radio-programming@yahoogroups.com
> [mailto:radio-programming@yahoogroups.com] On Behalf Of martinsouthyorks
> Sent: Sunday, 29 November 2009 08:14
> To: radio-programming@yahoogroups.com
> Subject: Re: [radio-prog@yhgrps] tait 2020 programming
>
> cheers for this
>
> channel parameters are on high but still only 5w hence need to tune the pot.
>
> just wiped the radio and starting a fresh trying to suss the blooming scan
> groups
> can get the scan to light up but it doesn't scroll thru channels ?
> should it?
> made the scan groups accessible from the panel..do i need to do this?
>
> or will it just scan and when time up revert back to the channel it was on?
>
> if this is the case  i will need to extend scan time..
>
> once i suss this out i rekon the radio is a nice thing
> just needs the display and button lights changing to blue.
>
>
> cheers
> martin
>
>
>
> with
> --- In radio-programming@yahoogroups.com, ian@ wrote:
> >
> > The pot is maxium power adjust, but don't forget you can program channels
> to high power (25 watts) or low panel (5 watts) when you set the channel
> parimeters.
> >
> >
> >
> > -----Original Message-----
> > From: martinsouthyorks <martinsouthyorks@>
> > To: radio-programming@yahoogroups.com
> > Sent: Sat, Nov 28, 2009 6:18 pm
> > Subject: Re: [radio-prog@yhgrps] tait 2020 programming
> >
> >
> >
> >
> > ha ha...
> > the light bulb's just lit
> > does this mean you can only scan 4 channels not 50 at a time
> >
> > this maybe why i can get it to work..
> > do you know the maximum scan ?
> > will be going in the shack tonight .not watching that x factor
> rubbish..couple of beers and programming radio
> >
> > another question ..when you remove the lower case and the radio is on it's
> back .there's a small pot you can access thru the heat plates ..is this the
> power adjuster
> > thanks for you reply..
> > martin
> >
> > --- In radio-programming@yahoogroups.com, "jeffwa4wd" <jeff@> wrote:
> > >
> > > To remove the bracket just get a medium flat head screw driver and
> carefully leaver one side of the bracket, it'll just pop off.
> > >
> > > I'm not sure about your issue with the scan group, mine was simple. Gave
> the scan group a channel number, then a name, then added four scan channels.
>
> > >
> > >
> > >
> > > --- In radio-programming@yahoogroups.com, "martinsouthyorks"
> <martinsouthyorks@> wrote:
> > > >
> > > >
> > > > thanks for your reply
> > > >
> > > > i've managed to program the radio
> > > > all channels ,repeaters,just can't manage to sort the scan groups out
> > > > can someone..explain it in simple terms ,i've read the manual numerous
> times but still can't sort it..
> > > >
> > > > also has anyone got an instalation manual..the radio is in the bracket
> but i have not tool to remove it..would like to check the power out put from
> inside the radio..
> > > >
> > > >
> > > > cheers
> > > > martin
> > > > --- In radio-programming@yahoogroups.com, Tom Crowley <tecrowley@>
> wrote:
> > > > >
> > > > > Ok
> > > > > That might be it
> > > > > I have a 486DX2 to program my Challengers
> > > > > I can read and make changes to the files with my 1.6gig PC
> > > > > but will error out when you go to program
> > > > > See if you can run it at a slower speed or try a differnt pc.
> > > > > I have heard of software that will run the pc at a slow speed for
> older
> > > > > programs
> > > > > You have to remember that the software was writen in the mid 80's
> > > > > Jay, Jim and Rob where using Comadors 64 when the project was
> started then they
> > > > > got some PC's
> > > > > about 87
> > > > > Tom
> > > > >
> > > > > At 04:26 PM 11/26/2009 +0000, you wrote:
> > > > > >
> > > > > >
> > > > > >
> > > > > > hi
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > [Non-text portions of this message have been removed]
> > > > >
> > > >
> > >
> >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
> ------------------------------------
>
> Community email addresses:
>   Post message: radio-programming@yahoogroups.com
>   Subscribe:    radio-programming-subscribe@yahoogroups.com
>   Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
>   List owner:   radio-programming-owner@yahoogroups.com
>
> Shortcut URL to this page:
>   http://www.yahoogroups.com/community/radio-programmingYahoo! Groups Links
>

Hi Martin,

Basically, each scan group you want to have takes up one memory channel
position, so, for instance, if you wanted to have 3 scan groups then you
would use 3 channel. In mine I started at CH 99 and worked backwards. I have
about 4 or 5 scan groups. You can give each a name if you wish.

Once you set a channel as a scan group, it then allows you to list the
channel numbers to be allocated to that scan group. I don't remember at the
moment whether there is a limit to the number of channels you can have in a
scan group but I know that you can have a channel in more than one group, in
fact in every group if you wish.
I hope that that has cleared up a bit about how scan groups work and you
will be able to work it out from there. If you are still having problems,
give me a yell and I'll bring mine up and check the finer details.

Once you have the scan groups selected and programmed in, you just select
the memory channel and it starts scanning that group.

73....Eric VK2VE.


-----Original Message-----
From: radio-programming@yahoogroups.com
[mailto:radio-programming@yahoogroups.com] On Behalf Of martinsouthyorks
Sent: Sunday, 29 November 2009 08:14
To: radio-programming@yahoogroups.com
Subject: Re: [radio-prog@yhgrps] tait 2020 programming

cheers for this

channel parameters are on high but still only 5w hence need to tune the pot.

just wiped the radio and starting a fresh trying to suss the blooming scan
groups
can get the scan to light up but it doesn't scroll thru channels ?
should it?
made the scan groups accessible from the panel..do i need to do this?

or will it just scan and when time up revert back to the channel it was on?

if this is the case  i will need to extend scan time..

once i suss this out i rekon the radio is a nice thing
just needs the display and button lights changing to blue.


cheers
martin



with
--- In radio-programming@yahoogroups.com, ian@... wrote:
>
> The pot is maxium power adjust, but don't forget you can program channels
to high power (25 watts) or low panel (5 watts) when you set the channel
parimeters.
>
>
>
> -----Original Message-----
> From: martinsouthyorks <martinsouthyorks@...>
> To: radio-programming@yahoogroups.com
> Sent: Sat, Nov 28, 2009 6:18 pm
> Subject: Re: [radio-prog@yhgrps] tait 2020 programming
>
>
>
>
> ha ha...
> the light bulb's just lit
> does this mean you can only scan 4 channels not 50 at a time
>
> this maybe why i can get it to work..
> do you know the maximum scan ?
> will be going in the shack tonight .not watching that x factor
rubbish..couple of beers and programming radio
>
> another question ..when you remove the lower case and the radio is on it's
back .there's a small pot you can access thru the heat plates ..is this the
power adjuster
> thanks for you reply..
> martin
>
> --- In radio-programming@yahoogroups.com, "jeffwa4wd" <jeff@> wrote:
> >
> > To remove the bracket just get a medium flat head screw driver and
carefully leaver one side of the bracket, it'll just pop off.
> >
> > I'm not sure about your issue with the scan group, mine was simple. Gave
the scan group a channel number, then a name, then added four scan channels.

> >
> >
> >
> > --- In radio-programming@yahoogroups.com, "martinsouthyorks"
<martinsouthyorks@> wrote:
> > >
> > >
> > > thanks for your reply
> > >
> > > i've managed to program the radio
> > > all channels ,repeaters,just can't manage to sort the scan groups out
> > > can someone..explain it in simple terms ,i've read the manual numerous
times but still can't sort it..
> > >
> > > also has anyone got an instalation manual..the radio is in the bracket
but i have not tool to remove it..would like to check the power out put from
inside the radio..
> > >
> > >
> > > cheers
> > > martin
> > > --- In radio-programming@yahoogroups.com, Tom Crowley <tecrowley@>
wrote:
> > > >
> > > > Ok
> > > > That might be it
> > > > I have a 486DX2 to program my Challengers
> > > > I can read and make changes to the files with my 1.6gig PC
> > > > but will error out when you go to program
> > > > See if you can run it at a slower speed or try a differnt pc.
> > > > I have heard of software that will run the pc at a slow speed for
older
> > > > programs
> > > > You have to remember that the software was writen in the mid 80's
> > > > Jay, Jim and Rob where using Comadors 64 when the project was
started then they
> > > > got some PC's
> > > > about 87
> > > > Tom
> > > >
> > > > At 04:26 PM 11/26/2009 +0000, you wrote:
> > > > >
> > > > >
> > > > >
> > > > > hi
> > > >
> > > >
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > >
> >
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>




------------------------------------

Community email addresses:
   Post message: radio-programming@yahoogroups.com
   Subscribe:    radio-programming-subscribe@yahoogroups.com
   Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
   List owner:   radio-programming-owner@yahoogroups.com

Shortcut URL to this page:
   http://www.yahoogroups.com/community/radio-programmingYahoo! Groups Links

Hey everyone I have a dilemma that is yet to be solved... I have a Motorola UHF
GP380 that s a codeplug error. I have tried searching online for a codeplug for
my radio and have been unsuccessful in finding one. This is an asian radio that
I bought off ebay brand new.. The seller provided me with a corrupt CPS cd and I
tried using the US waris codeplug editing program and screwed the thing up. Can
anyone help me in getting this radio working again? Here is the technical
information on my radio.

Tanapa #: PMUE1579A

Version #: R07.06.03

Model Number: AZH25RDH9AA6

I desperately need to get this radio brought back to life. Thanks

Has anyone had success in purchasing CPS from Motorola?  I recently purchased an
HT1250 and I'll be needing the latest version of the CPS to program it.  I've
heard mention of setting up an online account with them but can't seem to figure
out how in browsing their website.  Anyone had any luck or experience with any
of this?

I have the RSS for this radio but I don't have any help file that suppose to
come with, it's like the RSS that I got is not complete.  Some files are
missing..

Anyone has it please!!!!

It's a pain to program it, so it'll help if I hace this help file.


Thanks

VE2JER
Sylvain

as goofy as this is going to sound, lick the contacts on the radio then
connect the connector and try it...

works about 90 pct the time for me... and take an eraser to the contacts and
make sure they are clean...

   _____

From: radio-programming@yahoogroups.com
[mailto:radio-programming@yahoogroups.com] On Behalf Of aaronf756
Sent: Saturday, November 28, 2009 10:30 PM
To: radio-programming@yahoogroups.com
Subject: [radio-prog@yhgrps] HT1000




Thanks for all of the replies with the RSS i got this one to work However
now on the RSS it is telling me that i have Unsuccessful Rib Port
Communication because of either no rib power, no rib or rib malfunctioning,
poor connection between rib and pc or bad pc card HOWEVER i have been
programming maxtrac's all night and did that one and went back to the
maxtracs and have no issues with those at all using the same rib box and pc,
i even tried a different cable and that's not working any sugestiions






[Non-text portions of this message have been removed]

Thanks for all of the replies with the RSS i got this one to work However now on
the RSS it is telling me that i have Unsuccessful Rib Port Communication because
of either no rib power, no rib or rib malfunctioning, poor connection between
rib and pc or bad pc card HOWEVER i have been programming maxtrac's all night
and did that one and went back to the maxtracs and have no issues with those at
all using the same rib box and pc, i even tried a different cable and that's not
working any sugestiions

Most likely the software is fine, try creating a new shortcut to the .exe in
the directory or use the .exe itself

Craig A. Gagne
Owner - Northeast Two-Way Communications
  <http://www.northeast2waycomm.com/> www.northeast2waycomm.com



   _____

From: radio-programming@yahoogroups.com
[mailto:radio-programming@yahoogroups.com] On Behalf Of aaronf756
Sent: Saturday, November 28, 2009 7:01 PM
To: radio-programming@yahoogroups.com
Subject: [radio-prog@yhgrps] Motorola HT1000




Hi Does anyone have the RSS for the HT1000.... The file that i have is
corupt and is not working and i keep getting an error Invalid Startup
Directory, Please check your pif file.






[Non-text portions of this message have been removed]

Hi Does anyone have the RSS for the HT1000.... The file that i have is corupt
and is not working and i keep getting an error Invalid Startup Directory, Please
check your pif file.

cheers for this

channel parameters are on high but still only 5w hence need to tune the pot.

just wiped the radio and starting a fresh trying to suss the blooming scan
groups
can get the scan to light up but it doesn't scroll thru channels ?
should it?
made the scan groups accessible from the panel..do i need to do this?

or will it just scan and when time up revert back to the channel it was on?

if this is the case  i will need to extend scan time..

once i suss this out i rekon the radio is a nice thing
just needs the display and button lights changing to blue.


cheers
martin



with
--- In radio-programming@yahoogroups.com, ian@... wrote:
>
> The pot is maxium power adjust, but don't forget you can program channels to
high power (25 watts) or low panel (5 watts) when you set the channel
parimeters.
>
>
>
> -----Original Message-----
> From: martinsouthyorks <martinsouthyorks@...>
> To: radio-programming@yahoogroups.com
> Sent: Sat, Nov 28, 2009 6:18 pm
> Subject: Re: [radio-prog@yhgrps] tait 2020 programming
>
>
>
>
> ha ha...
> the light bulb's just lit
> does this mean you can only scan 4 channels not 50 at a time
>
> this maybe why i can get it to work..
> do you know the maximum scan ?
> will be going in the shack tonight .not watching that x factor rubbish..couple
of beers and programming radio
>
> another question ..when you remove the lower case and the radio is on it's
back .there's a small pot you can access thru the heat plates ..is this the
power adjuster
> thanks for you reply..
> martin
>
> --- In radio-programming@yahoogroups.com, "jeffwa4wd" <jeff@> wrote:
> >
> > To remove the bracket just get a medium flat head screw driver and carefully
leaver one side of the bracket, it'll just pop off.
> >
> > I'm not sure about your issue with the scan group, mine was simple. Gave the
scan group a channel number, then a name, then added four scan channels.
> >
> >
> >
> > --- In radio-programming@yahoogroups.com, "martinsouthyorks"
<martinsouthyorks@> wrote:
> > >
> > >
> > > thanks for your reply
> > >
> > > i've managed to program the radio
> > > all channels ,repeaters,just can't manage to sort the scan groups out
> > > can someone..explain it in simple terms ,i've read the manual numerous
times but still can't sort it..
> > >
> > > also has anyone got an instalation manual..the radio is in the bracket but
i have not tool to remove it..would like to check the power out put from inside
the radio..
> > >
> > >
> > > cheers
> > > martin
> > > --- In radio-programming@yahoogroups.com, Tom Crowley <tecrowley@> wrote:
> > > >
> > > > Ok
> > > > That might be it
> > > > I have a 486DX2 to program my Challengers
> > > > I can read and make changes to the files with my 1.6gig PC
> > > > but will error out when you go to program
> > > > See if you can run it at a slower speed or try a differnt pc.
> > > > I have heard of software that will run the pc at a slow speed for older
> > > > programs
> > > > You have to remember that the software was writen in the mid 80's
> > > > Jay, Jim and Rob where using Comadors 64 when the project was started
then they
> > > > got some PC's
> > > > about 87
> > > > Tom
> > > >
> > > > At 04:26 PM 11/26/2009 +0000, you wrote:
> > > > >
> > > > >
> > > > >
> > > > > hi
> > > >
> > > >
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > >
> >
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

i have problems with programming relm chatral radios smvi 40 e smv 40, help me
please
Rodrigo

[Non-text portions of this message have been removed]

The pot is maxium power adjust, but don't forget you can program channels to
high power (25 watts) or low panel (5 watts) when you set the channel
parimeters.



-----Original Message-----
From: martinsouthyorks <martinsouthyorks@...>
To: radio-programming@yahoogroups.com
Sent: Sat, Nov 28, 2009 6:18 pm
Subject: Re: [radio-prog@yhgrps] tait 2020 programming




ha ha...
the light bulb's just lit
does this mean you can only scan 4 channels not 50 at a time

this maybe why i can get it to work..
do you know the maximum scan ?
will be going in the shack tonight .not watching that x factor rubbish..couple
of beers and programming radio

another question ..when you remove the lower case and the radio is on it's back
.there's a small pot you can access thru the heat plates ..is this the power
adjuster
thanks for you reply..
martin

--- In radio-programming@yahoogroups.com, "jeffwa4wd" <jeff@...> wrote:
>
> To remove the bracket just get a medium flat head screw driver and carefully
leaver one side of the bracket, it'll just pop off.
>
> I'm not sure about your issue with the scan group, mine was simple. Gave the
scan group a channel number, then a name, then added four scan channels.
>
>
>
> --- In radio-programming@yahoogroups.com, "martinsouthyorks"
<martinsouthyorks@> wrote:
> >
> >
> > thanks for your reply
> >
> > i've managed to program the radio
> > all channels ,repeaters,just can't manage to sort the scan groups out
> > can someone..explain it in simple terms ,i've read the manual numerous times
but still can't sort it..
> >
> > also has anyone got an instalation manual..the radio is in the bracket but i
have not tool to remove it..would like to check the power out put from inside
the radio..
> >
> >
> > cheers
> > martin
> > --- In radio-programming@yahoogroups.com, Tom Crowley <tecrowley@> wrote:
> > >
> > > Ok
> > > That might be it
> > > I have a 486DX2 to program my Challengers
> > > I can read and make changes to the files with my 1.6gig PC
> > > but will error out when you go to program
> > > See if you can run it at a slower speed or try a differnt pc.
> > > I have heard of software that will run the pc at a slow speed for older
> > > programs
> > > You have to remember that the software was writen in the mid 80's
> > > Jay, Jim and Rob where using Comadors 64 when the project was started then
they
> > > got some PC's
> > > about 87
> > > Tom
> > >
> > > At 04:26 PM 11/26/2009 +0000, you wrote:
> > > >
> > > >
> > > >
> > > > hi
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
>







[Non-text portions of this message have been removed]

yep..that worked..cheers martin

--- In radio-programming@yahoogroups.com, "tunzafartz" <tunzafartz@...> wrote:
>
> Yikes, what butchery!  Use a decent cable tie and insert it into the slot to
release the radio from the cradle.
>
>
> --- In radio-programming@yahoogroups.com, "jeffwa4wd" <jeff@> wrote:
> >
> > To remove the bracket just get a medium flat head screw driver and carefully
leaver one side of the bracket, it'll just pop off.
> >
> > I'm not sure about your issue with the scan group, mine was simple.  Gave
the scan group a channel number, then a name, then added four scan channels.
> >
> >
> >
> > --- In radio-programming@yahoogroups.com, "martinsouthyorks"
<martinsouthyorks@> wrote:
> > >
> > >
> > > thanks for your reply
> > >
> > > i've managed to program the radio
> > > all channels ,repeaters,just can't manage to sort the scan groups out
> > > can someone..explain it in simple terms ,i've read the manual  numerous
times but still can't sort it..
> > >
> > > also  has anyone got an instalation manual..the radio is in the bracket
but i have not tool to remove it..would like to check the power out put from
inside the radio..
> > >
> > >
> > > cheers
> > > martin
> > > --- In radio-programming@yahoogroups.com, Tom Crowley <tecrowley@> wrote:
> > > >
> > > > Ok
> > > > That might be it
> > > > I have a 486DX2  to program my Challengers
> > > > I can read and make changes to the files with my 1.6gig PC
> > > > but  will error out when you go to program
> > > > See if you can run it at a slower speed or try a differnt pc.
> > > > I have heard of software that will run the pc at a slow speed for older
> > > > programs
> > > > You have to remember that the software was writen in the mid 80's
> > > > Jay, Jim and Rob where using Comadors 64 when the project was started
then they
> > > > got some PC's
> > > > about 87
> > > > Tom
> > > >
> > > > At 04:26 PM 11/26/2009 +0000, you wrote:
> > > > >
> > > > >
> > > > >
> > > > > hi
> > > >
> > > >
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > >
> >
>

ha ha...
the light bulb's just lit
does this mean you can only scan 4 channels not 50 at a time

this maybe why i can get it to work..
do you know the maximum scan ?
will be going in the shack tonight .not watching that x factor rubbish..couple
of beers and programming radio

another question ..when you remove the lower case and the radio is on it's back
.there's a small pot you can access thru the heat plates ..is this the power
adjuster
thanks for you reply..
martin

--- In radio-programming@yahoogroups.com, "jeffwa4wd" <jeff@...> wrote:
>
> To remove the bracket just get a medium flat head screw driver and carefully
leaver one side of the bracket, it'll just pop off.
>
> I'm not sure about your issue with the scan group, mine was simple.  Gave the
scan group a channel number, then a name, then added four scan channels.
>
>
>
> --- In radio-programming@yahoogroups.com, "martinsouthyorks"
<martinsouthyorks@> wrote:
> >
> >
> > thanks for your reply
> >
> > i've managed to program the radio
> > all channels ,repeaters,just can't manage to sort the scan groups out
> > can someone..explain it in simple terms ,i've read the manual  numerous
times but still can't sort it..
> >
> > also  has anyone got an instalation manual..the radio is in the bracket but
i have not tool to remove it..would like to check the power out put from inside
the radio..
> >
> >
> > cheers
> > martin
> > --- In radio-programming@yahoogroups.com, Tom Crowley <tecrowley@> wrote:
> > >
> > > Ok
> > > That might be it
> > > I have a 486DX2  to program my Challengers
> > > I can read and make changes to the files with my 1.6gig PC
> > > but  will error out when you go to program
> > > See if you can run it at a slower speed or try a differnt pc.
> > > I have heard of software that will run the pc at a slow speed for older
> > > programs
> > > You have to remember that the software was writen in the mid 80's
> > > Jay, Jim and Rob where using Comadors 64 when the project was started then
they
> > > got some PC's
> > > about 87
> > > Tom
> > >
> > > At 04:26 PM 11/26/2009 +0000, you wrote:
> > > >
> > > >
> > > >
> > > > hi
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
>

hi does anyone know where i can download programming software for kenwood
tk-3170 portable? Or if anyone has a copy??

I believe its KPG-101D

Any Help Thanks in Advance.....

Neil

Kevin,

I haven't heard from you via email in a while. I don't know if you are busy with
school, the hollidays, etc. or if something else has happened. Please email and
let me know your status.

Thanks,

Joe

--- In radio-programming@yahoogroups.com, kevin valentino <kevinvalentino@...>
wrote:
>
> with the equipment you have you are very limited because of the max bandwith
of your sig generator. your best bet is a service monitor but the prices can be
intolerable, how much would you be willing to afford for say a ct systems 3000
b? i picked one up recently that was extremely reasonable and working. it also
includes sinad, field strangth, and power measurement as well.
> really don't need it but could not pass it up for a backup. since then i
picked up an IFR so now i'm stuck with one more than i need.
> --- On Thu, 11/12/09, mojoehand <mojoehand@...> wrote:
>
>
> From: mojoehand <mojoehand@...>
> Subject: [radio-prog@yhgrps] Radio servicing on a budget
> To: radio-programming@yahoogroups.com
> Date: Thursday, November 12, 2009, 3:34 AM
>
>
>  
>
>
>
> I'm teaching myself how to service VHF (2M) radios. I can't afford a service
monitor and am trying to make do with what equipment I have. One area that I am
having trouble with is measuring receiver sensitivity.
>
> I have an Elenco SG-9500 signal generator. For output attenuation, it has an
attenuator button marked "0dB/20dB" and an attenuator pot marked "Fine". The
manual says the RF output is "100mV RMS Aprox. Up to 35MHhz". Well, the signal
generator goes up to 150MHz, so this isn't much help. I don't have any way to
measure the actual output level.
>
> I do have an old HP AC RMS meter, but it won't measure down into the microvolt
range. I could certainly use this meter on the receiver speaker leads to perform
a 20dB quieting measurement, though. My oscilloscope won't measure microvolts
either.
>
> What would you recommend for a simple, inexpensive way to measure my signal
generator output? I don't want to use a boat anchor, as I have very little room
to work.
>
> Thanks for any suggestions.
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

shawn you e-mail addresss is not valid
 GERMAN T. A.




[Non-text portions of this message have been removed]