Hello, looking for firmware, codeplug, and boot for GP328 radio.
Lates versions would be better.



--
Best regards,
  MALE                          mailto:radiosoftware@...

Hello, looking for firmware, codeplug, and boot for GP338 radio.
Lates versions would be better.



--
Best regards,
  MALE                          mailto:radiosoftware@...

TK240 can be easily field programmed without using a PC.
Jilly


--- In radio-programming@yahoogroups.com, "drgoodwrench@..."
<drgoodwrench@...> wrote:
>
> Holy Cow Batman!
> There are quite a few of them!
> And as it turns out...
> I don't have the KPG-9D for the TK-240....
> GO figure?
> Anyone wishing to help me please let me know at my e-mail address!
> And thanks Paul!
> That was very helpful too!
> Doc
>
> Doc is drgoodwrench@...
> There is New Light in my life!!!
>
> [Non-text portions of this message have been removed]
>

\i've been trying to program a Motorola GM1200 and all seemed ok but
the TX did not work after programming.
I loaded a new codeplug from the programmer which matched so far as
type went and this has resulted in a display of 'RADIO ERROR 4'
It seems like the codeplug is not correct or I'm using the wrong RSS or
something?
Anyone had this and what is 'Radio Error 4'
ANy help would be appreciated.
Jilly

Holy Cow Batman!
There are quite a few of them!
And as it turns out...
I don't have the KPG-9D for the TK-240....
GO figure?
Anyone wishing to help me please let me know at my e-mail address!
And thanks Paul!
That was very helpful too!
Doc

Doc is drgoodwrench@...
There is New Light in my life!!!

[Non-text portions of this message have been removed]

Ok this might help a few ppl out there.

Or at least I hope it does.

Wile I understand this list is not complete and may not be the most correct
it does give you some idea as to what software you might need for your radio


KENWOOD
         SOFTWARE/PROGRAMMER CROSS REFERENCE


KPG-5D 2.14 TK-930 / 931 UPDATED9/04
KPG-6D 1.30 TK-705D / 805D TK-706D / 807D
KPG-7D 2.01 TK-830 / 730 / 630
KPG-9D 1.40 TK-240D / 340D
KPG-11D 1.25 TK-230 / 330
KPG-13D  UK 1.04
KPG-15D 1.01 KDS-10  (TWO TONE DECODER)
KPG-16D 1.10 TK-430 / 431
KPG-20D 1.04 TK-709T / TK-349T
KPG-21D 1.00 TKR-720 / 820
TKB-620 / 720
KPG-23D 1.01 TK-250 /350
KPG-25D 3.00 TK-940 / 941 / 840/ 841
KPG-26D 1.00 TK-353 LTR
KPG-27D 5.00 TK-260 / 270 / 278 / 272
TK-360 / 370 / 378 / 372 / 388
KPG-28D 1.00 TK-759 / 859/ / 752 / 852
KPG-29D 2.10 TK-760 / 762 / 768 TK-860 / 862 / 868
KPG-32D 1.00 TK-259 / TK-359
KPG-34D 2.00 TK-261 / TK-361
KPG-34D_LAB V.7-03 TK-261/ TK-361
KPG-35D 1.00 TK-480 / 481
KPG-38D 1.01 TK-290/390
KPG-41D  UK 1.12 TK-715 \ TK-255
KPG-44D 2.0 TK-690\TK-790\ TK–890
KPG-44D 2.01 TK-690 / 790 / 890
RegNumber;
KPG-47D 3.00 TKR 830/740/840  UPDATED 9/04
RegNumber;
KPG-48D 1.00 TK-2100 / 3100 / 3101
KPG-48D_LAB V.7-03 TK-2100 / 3100 / 3101
KPG-49D 2.00 TK-280 / 380  / 780 / 880 / 980 /981
KPG49D_302 3.02 TK-280 / 380  / 480/ 481 /  780 / 880 / 980 /981
KPG49D 4.01 TK-280 / 380  / 480/ 481 /  780 / 880 / 980 /981
RegNumber;
KPG-52D 1.00 UBZ-LH14
KPG-54D_LAB 1.00 TK-3101
KPG-55D 2.01 TK-2102A / 2107A / 3102A / 3107A
KPG-56D 2.00 TK-762G / 768G / 760G / 862G / 868G / 860G / 260G / 270G / 278G
/ 360G / 370G / 378G
KPG56D-V2.10 2.10 TK-260G / 360G  /  270G / 370G/ 272G/ 372G
TK-760G / 762G / 860G / 862G
RegNumber:
KPG56D-V300SCN 3.00 TK-260G / 360G  /  270G / 370G/ 272G/ 372G
TK-760G / 762G / 860G / 862G
RegNumber:
KPG-56D- Version 4 4.00 TK-260G / 360G  /  270G / 370G/ 272G/ 372G
TK-760G / 762G / 860G / 862G
RegNumber
KPG-56D 4.21 TK-260G / 360G  /  270G / 370G/ 272G/ 372G
TK-760G / 762G / 860G / 862G
RegNumber
KPG-59D 2.10 TK-190 / TK-6110
KPG-60D 1.01
RegNumber;
KPG-62D 1.00 TK-285 / 385  TK-785 / 885
RegNumber:
KPG-65ED  Fleet Sync
KPG-66D  2.01 Repeater TKR750/850 KENWOOD
RegNumber:
KPG-66ND 1.00B16 Repeater TKR750/850 KENWOOD
RegNumber:
KPG-67D 1.00 TK-260G / 270G / 360G / 370G / 760G / 762G / 860G / 862G
RegNumber;
KPG-69D 1.11 TK-2118 / 3118
RegNumber:
KPG-70D 2.00 TK-7102\8102 MOBILE
RegNumber;
KPG-70D 3.00 TK-7102 / TK-7108 / TK-8102 / TK8108
RegNumber;
KPG-71D 1.10 KDS-100 MDT / MESSAGE TERMINAL
RegNumber;
KPG-71D 1.30 KDS-100 MDT / MESSAGE TERMINAL
RegNumber;
KPG-73D 1.01 KGP 2A/2B
RegNumber;
KPG-74D 1.10 TK-2140 & TK-3140 PORTABLES
RegNumber;
KPG-74D 1.11 TK-2140 & TK-3140 PORTABLES
RegNumber;    9/04
KPG-75D 1.10 TK-3130 & TK-3131 PORTABLES
RegNumber;
KPG-76D 1.10 TK-373 LTR PORTABLE
RegNumber;
KPG-77D 1.00 TK-782  220MHz MOBILE
RegNumber;
KPG-79D 1.01 TK-7150 & TK-8150 MOBILE
RegNumber;
KPG-80D 1.02 TK-7100 / TK-8100
RegNumber;
KPG-82D 2.01 TK-2160 / TK-2168 / TK-3160
RegNumber;
KPG-82D 2.02 TK-2160 / TK-2168 / TK-3160
RegNumber;
KPG-82D 2.03 TK-2160 / TK-2168 / TK-3160
RegNumber;
KPG-87D 1.00 TK-2202 / TK-2206 / TK-2207 / TK-3202 / TK-3206 / TK-3207
RegNumber;
KPG-89D 1.00 TK-7180/8180/2180/3180
RegNumber;
KPG-89D 1.02 TK-7180/8180/2180/3180
RegNumber;
KPG-89D 1.10 TK-7180/8180/2180/3180
RegNumber;
KPG-91D 2.00 TKR-751  TKR-851
RegNumber;
KPG-99D 1.01 TK-7160/8160

Kpg-101D 1.01 TK-2170/3170/3173



-------Original Message-------

From: drgoodwrench@...
Date: 11/03/07 09:27:23
To: radio-programming@yahoogroups.com
Subject: [radio-prog@yhgrps] TK-240

Does anyone know what software the Kenwood TK-240 requires?
I am in need of a good copy for one I have purchased for the local EMS boys.
I may already have it and just don't know where to find out which one to
use?
Thanks again to all!!!
Doc
Doc is drgoodwrench@...
There is New Light in my life!!!

[Non-text portions of this message have been removed]



Community email addresses:
   Post message: radio-programming@yahoogroups.com
   Subscribe:    radio-programming-subscribe@yahoogroups.com
   Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
   List owner:   radio-programming-owner@yahoogroups.com

Shortcut URL to this page:
   http://www.yahoogroups.com/community/radio-programming
Yahoo! Groups Links




[Non-text portions of this message have been removed]

Does anyone know what software the Kenwood TK-240 requires?
I am in need of a good copy for one I have purchased for the local EMS boys.
I may already have it and just don't know where to find out which one to use?
Thanks again to all!!!
Doc
Doc is drgoodwrench@...
There is New Light in my life!!!

[Non-text portions of this message have been removed]

Yes the radio IS STILL AVAIABLE please contact me via email at
jimbo2848@...

      Jim

FF337-NTFR <fire4117@...> wrote:
           Is the radio still available?? If so, I'm interested.

To: radio-programming@...: jimbo2848@...: Fri, 2
Nov 2007 16:06:00 +0000Subject: [radio-prog@yhgrps] FS XTS3000 model 1 800mhz

I have an XTS3000 model#H09UCC9PW5AN, flash code 100004-000000-4 I bought it
cause local PD's are on 800 however I am not able to hear anything cause they
are scrambled and without the system key I cant program talk groups or trunking
so this radio is useless to me It will come with just the radio and antenna NO
battery or charger. Cosmeticaly it ia 8 out of 10 on the side it has NYCHA
engraved on it, but the case can be easily switched. I am asking what I paid for
this unit $215 and that will include shipping. I will take and prefer paypal any
interest please email me.

__________________________________________________________
Express yourself with free Messenger emoticons. Get them today!
http://www.freemessengeremoticons.ca/?icid=EMENCA122

[Non-text portions of this message have been removed]






[Non-text portions of this message have been removed]

Would anyone know where i might find a copy of this ver of the CPS to
see if it sorts out a prob i have ..
Thanks

--- In radio-programming@yahoogroups.com, "ka1jfy" >

> Well.......
>
> I have it on good authority, that if you use the DOS based
> programming software, they WILL go OOB.

Aha!  Thank you for THAT tidbit of info! Seriously! I'm going to check
into one to play around with.  I thought that I was being fed a
"company line" when they emailed me back.

> But, the original poster never said anything about ham.
> Don't know anyone who chooses an F121 to do amateur unless they have
> some commercial freqs in it also.

I dunno...  *I* like using LMR stuff for ham freqs.  Depends on my
budget at the time.  Or freebies from businesses upgrading etc.

> In-band extenders almost never work. Too much desense.
> I used to have problems with /\/\ Pac R/T's, and they were 1/4 watt
> transmitters.

That part I was aware of.  However, I had read that if the antennas
are separated by enough space that in-band would work. (this obviously
is no good for mobile use)

> As to ID'ing, that's only required in the Amateur service.
> Commercial are covered by the original licensee.
> F121's can't do GMRS [wrong band].

Um..... I was under the impression that commercial stations, public
safety and GMRS had to ID.  All of the ones I listen to ID fairly
regularly.  Some even in CW.

Yeah, I know the 121 is VHF.....I just threw GMRS in there.


> Re: the F121's being easy to make into repeaters:
> He's not looking for a 'repeater'.

I was just going by what he was saying.  I assumed he was wanting to
be able to use a HT outside the vehicle (or where ever his setup was
going to be).   This is what I'm wanting to set up where I live.  I'm
out in the boonies and cannot hit any repeaters (except 2 local ones)
without using my base.

Either way, thanks for the answers, cause you've helped me out some
now.  Especially on that SVR-200.

Jason

I have an XTS3000 model#H09UCC9PW5AN, flash code 100004-000000-4 I
bought it cause local PD's are on 800 however I am not able to hear
anything cause they are scrambled and without the system key I cant
program talk groups or trunking so this radio is useless to me It will
come with just the radio and antenna NO battery or charger.
Cosmeticaly it ia 8 out of 10 on the side it has NYCHA engraved on it,
but the case can be easily switched. I am asking what I paid for this
unit $215 and that will include shipping. I will take and prefer
paypal any interest please email me.

I have an HT1250 half keypad UHF for sale this unit will come with 5 OEM
batteries 1 OEM shoulder mic 1 OEM charger and  2 long antennas and 1 stubby
antenna Cosmetically it is 9 out of 10. I took this in on a trade for an XTS3000
so I have no use for it. I am asking $315 shipped for it if anybody is
interested in it please email me. I AM NOT LOOKING TO TRADE FOR ANYTHING.

     Jim


[Non-text portions of this message have been removed]

Thanks for those but no cps included just the dos stuff.


--- In radio-programming@yahoogroups.com, "g0nmy" <g0nmy@...> wrote:
>
> Hi Phil
> software on its way mate.
> Cheers Mark
>
>   ----- Original Message -----
>   From: Jim Dyke
>   To: radio-programming@yahoogroups.com
>   Sent: Thursday, November 01, 2007 11:03 PM
>   Subject: Re: [radio-prog@yhgrps] MTS2000 CPS
>
>
>   I have what your looking for. What do have to trade?
>
>   Phil <w7rss@...> wrote:          Anyone point me into the right
direction to find the mts2000 cps? i
>   have searched the threads here with no success and help will be
very
>   helpful.
>
>
>
>
>
>
>   [Non-text portions of this message have been removed]
>
>
>
>   Community email addresses:
>     Post message: radio-programming@yahoogroups.com
>     Subscribe:    radio-programming-subscribe@yahoogroups.com
>     Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
>     List owner:   radio-programming-owner@yahoogroups.com
>
>   Shortcut URL to this page:
>     http://www.yahoogroups.com/community/radio-programming
>   Yahoo! Groups Links
>
>
>
>
>
>   --
>   No virus found in this incoming message.
>   Checked by AVG Free Edition.
>   Version: 7.5.503 / Virus Database: 269.15.17/1103 - Release Date:
01/11/2007 06:01
>
>
>
> [Non-text portions of this message have been removed]
>

--- In radio-programming@yahoogroups.com, Jim Dyke <jimbo2848@...>
wrote:
>
> I have what your looking for. What do have to trade?
>
What do you need? I have almost all the kenwood software and alot of
motorola stuff give me your want list and might be able to trade with
ya.

I have got it!
Thanks again!
Works perfectly...!
You guys are all jewels!!!
well, most of You!

TKS 73's to all...
Doc is drgoodwrench@...
There is New Light in my life!!!

[Non-text portions of this message have been removed]

Sent to your email check your bulk folder if you don't get it in the
mail inbox.


Peter Dakota Summerhawk


-----Original Message-----
From: radio-programming@yahoogroups.com
[mailto:radio-programming@yahoogroups.com] On Behalf Of
drgoodwrench@...
Sent: Friday, November 02, 2007 4:30 AM
To: radio-programming@yahoogroups.com
Subject: RE: [SPAM]RE: [radio-prog@yhgrps] Kenwood TK 2140 software...

I think You are right Peter...
And yes I would like you to send me a copy to my e-mail addy.
And thanks again!
Do You know if the one for the TK240 is the same as the 2140?

73's!
Doc is drgoodwrench@...
There is New Light in my life!!!

[Non-text portions of this message have been removed]



Community email addresses:
   Post message: radio-programming@yahoogroups.com
   Subscribe:    radio-programming-subscribe@yahoogroups.com
   Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
   List owner:   radio-programming-owner@yahoogroups.com

Shortcut URL to this page:
   http://www.yahoogroups.com/community/radio-programming
Yahoo! Groups Links

Good Morning I am in need of the XTL 5000 Version 9 if any 1 can help me PLEASE
and thank you You can email me off the list at tokerman@...


[Non-text portions of this message have been removed]

I think You are right Peter...
And yes I would like you to send me a copy to my e-mail addy.
And thanks again!
Do You know if the one for the TK240 is the same as the 2140?

73's!
Doc is drgoodwrench@...
There is New Light in my life!!!

[Non-text portions of this message have been removed]

I have an MCX1200 VHF trunker that i want to use in PMR mode , anyone
know the ver of the RSS/CPS to read these units ,

Thanks
J

I need a manual for this radio. PDF would be great but DOC will work to.
Thanks,
Bob
KE5NFF

KPG-74D Version 1.10 for this radio. I have it if you need it.
Please let me know and I can mail it to you if you want it.


Peter Dakota Summerhawk

Hi Phil
software on its way mate.
Cheers Mark

   ----- Original Message -----
   From: Jim Dyke
   To: radio-programming@yahoogroups.com
   Sent: Thursday, November 01, 2007 11:03 PM
   Subject: Re: [radio-prog@yhgrps] MTS2000 CPS


   I have what your looking for. What do have to trade?

   Phil <w7rss@...> wrote:          Anyone point me into the right
direction to find the mts2000 cps? i
   have searched the threads here with no success and help will be very
   helpful.






   [Non-text portions of this message have been removed]



   Community email addresses:
     Post message: radio-programming@yahoogroups.com
     Subscribe:    radio-programming-subscribe@yahoogroups.com
     Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
     List owner:   radio-programming-owner@yahoogroups.com

   Shortcut URL to this page:
     http://www.yahoogroups.com/community/radio-programming
   Yahoo! Groups Links





   --
   No virus found in this incoming message.
   Checked by AVG Free Edition.
   Version: 7.5.503 / Virus Database: 269.15.17/1103 - Release Date: 01/11/2007
06:01



[Non-text portions of this message have been removed]

I thought it was 74D ??

73, Dick, W1KSZ/7



[Non-text portions of this message have been removed]

If I am not mistaken that would be kpg89d for this radio.

If I am correct then I do have that one.

If not please let me know what it is and I will see if I can find it for you


-------Original Message-------

From: drgoodwrench@...
Date: 11/01/07 19:25:12
To: radio-programming
Subject: [radio-prog@yhgrps] Kenwood TK 2140 software...

Hello all!
I am once again without the correct software for one of my volunteer Police
Officers radio...
I am in need of a source for the correct version.
I got a hold of the cable (it was on E-bay!)
anyways...
Thanks in advance again to al of You that keep us volunteers...
VOLUNTEERS!!!

Doc Linehan
Doc is drgoodwrench@...
There is New Light in my life!!!

[Non-text portions of this message have been removed]



Community email addresses:
   Post message: radio-programming@yahoogroups.com
   Subscribe:    radio-programming-subscribe@yahoogroups.com
   Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
   List owner:   radio-programming-owner@yahoogroups.com

Shortcut URL to this page:
   http://www.yahoogroups.com/community/radio-programming
Yahoo! Groups Links




[Non-text portions of this message have been removed]

Ok this may seem a bit strange but here goes,

I have a small repeater which utilizes 2 GM300 mobile radios.

When I received the unit 2 years ago I was 'tinkering' with the programming and
ended up leaving the project to do something else.  unfortunately I left it with
the programming "not quite right" and after 2 years i'm a little lost as to how
it was originally set up.

I am hoping to 'play with it' in a couple of weeks and was wondering if perhaps
someone would have a RSS file for such a critter.  I am not looking for the
Software as i should still have that but rather a copy of a working setup that i
can take a peek at to remind my self how these things are programmed.

Thanks in advance

Jim S


_________________________________________________________________
Have fun while connecting on Messenger! Click here to learn more.
http://entertainment.sympatico.msn.ca/WindowsLiveMessenger

[Non-text portions of this message have been removed]

Hello all!
I am once again without the correct software for one of my volunteer Police
Officers radio...
I am in need of a source for the correct version.
I got a hold of the cable (it was on E-bay!)
anyways...
Thanks in advance again to al of You that keep us volunteers... VOLUNTEERS!!!

Doc Linehan
Doc is drgoodwrench@...
There is New Light in my life!!!

[Non-text portions of this message have been removed]

I have what your looking for. What do have to trade?

Phil <w7rss@...> wrote:          Anyone point me into the right
direction to find the mts2000 cps? i
have searched the threads here with no success and help will be very
helpful.






[Non-text portions of this message have been removed]

Well.......

I have it on good authority, that if you use the DOS based
programming software, they WILL go OOB.

But, the original poster never said anything about ham.
Don't know anyone who chooses an F121 to do amateur unless they have
some commercial freqs in it also.

In-band extenders almost never work. Too much desense.
I used to have problems with /\/\ Pac R/T's, and they were 1/4 watt
transmitters.

As to ID'ing, that's only required in the Amateur service.
Commercial are covered by the original licensee.
F121's can't do GMRS [wrong band].

Re: the F121's being easy to make into repeaters:
He's not looking for a 'repeater'.
He wants to be able to talk back thru one of the F121's to the system
he's listening to. That's a lot more complicated control than just a
simple repeater.


Walter


--- In radio-programming@yahoogroups.com, "Jason Cato" <gunman@...>
wrote:
>
> My .02 cents on this.... If you're referring to the SVR-200,
Pyramid's
> Tech Dept. swears on a stack of service manuals that their SVR-200's
> will not go out of band down to the Ham freqs.  *IF* that is true,
and
> I am in no way taking *THEM* at their word, then the SVR-200 is only
> going to help if he's wanting a MobEx for LMR or GMRS.
>
> His F121 are repeater ready, all it takes is 2 of the OPC-617 cables
> and an adapter to mate them together.  BUT, I dunno if that gives
him
> anything like ID'ing etc.  See this eBay ad;
> <http://cgi.ebay.com/DIY-ICOM-REPEATER-KIT-vhf-uhf-mobile-
radio_W0QQitemZ260176530355QQihZ016QQcategoryZ56987QQssPageNameZWDVWQQ
rdZ1QQcmdZViewItem>
>
> I'm still thinking about getting a SVR-200 off of eBay to play
with.
>
>
> --- In radio-programming@yahoogroups.com, "ka1jfy"
> <walter.howard.jr@> wrote:
> >
> > http://www.pyramidcomm.com/ builds exactly what you are
describing.
> > Complete with radio and controller.
> > See them on sleazeBay for $50-75.
> >
> > Walter
>snip>

Good evening has all .

Am has the search for all information concerning radiotelephone
BOSCH KF81.

All that relates to circuit S187B.

The binary calculation of the values for the model 80mhz.

Thank you in advance.

Patrice / France.

Hi there
  I've been looking for the programming software for a GM360vhf
    Could someone please help out or have access to the hackers russia
website. I was told of a chinesse version of hackers russia..  but cant
remember the web address
      thank you