There are two possible software passwords... the first is to read
the programming from the radio and the second is to be able to write
over the current data. Make up a simple programming file and try
to program the radio by writing over the current setup. If you can
write the radio you're back to square one all the way around. If you
need a data write password the radio needs to go back to Kenwood or
a proper Authorized Service Station to have the radio unlocked.
And like the other guy posted.. you could trade or sell it to me.
:-)
cheers,
skipp
www.radiowrench.com
> "skymoe88" <busterz@...> wrote:
>
> hi all i just bought 3 tk-7180 radios from a local auction and im
> trying to program them but they are asking me for a read authorization
> password, i dont know it , is there a way to reset this or get by
> it ....thanx
>
At 01:44 PM 10/31/2007, matthew alexander wrote:
>Adan, How much would you like for the MTX8000?
He e-mailed me pointing me to his eBay listing for it - $299 starting
bid, $309 Buy-It-Now. Tad pricey for the radio, IMHO.
Adan, How much would you like for the MTX8000?
Matt
--- ADAN GUILLEN <inetcgr@...> wrote:
> HI TO ALL, I HAVE A MTX8000 SMARTNET 800 MHZ RADIO.
> THE MODEL IS
> H01UCH6DB7AN. ITS FULL KEYPAD. GOOD WORKING. CONTACT
> ME IF INTERESTED
>
>
thank you
matthew alexander
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Hi,
I have available a number of Yaesu/Vertex NC-24 & NC-35 Chargers.
They are all 'Brand New' and boxed. Will take offers for any or all of
them. They are located in the North East of England.
73's
Vic Tuff
G7PYR
My .02 cents on this.... If you're referring to the SVR-200, Pyramid's
Tech Dept. swears on a stack of service manuals that their SVR-200's
will not go out of band down to the Ham freqs. *IF* that is true, and
I am in no way taking *THEM* at their word, then the SVR-200 is only
going to help if he's wanting a MobEx for LMR or GMRS.
His F121 are repeater ready, all it takes is 2 of the OPC-617 cables
and an adapter to mate them together. BUT, I dunno if that gives him
anything like ID'ing etc. See this eBay ad;
<http://cgi.ebay.com/DIY-ICOM-REPEATER-KIT-vhf-uhf-mobile-radio_W0QQitemZ2601765\
30355QQihZ016QQcategoryZ56987QQssPageNameZWDVWQQrdZ1QQcmdZViewItem>
I'm still thinking about getting a SVR-200 off of eBay to play with.
--- In radio-programming@yahoogroups.com, "ka1jfy"
<walter.howard.jr@...> wrote:
>
> http://www.pyramidcomm.com/ builds exactly what you are describing.
> Complete with radio and controller.
> See them on sleazeBay for $50-75.
>
> Walter
>
>
> --- In radio-programming@yahoogroups.com, "Mike" <cifn2@> wrote:
> >
> > What I guess I should call it is, a mobile extender........
> >
> > --- In radio-programming@yahoogroups.com, "Mike" <cifn2@> wrote:
> > >
> > > I have been thinking if it would even be possible to work it, but
> I
> > > cannot find any information about it or even know if it is
> feasible.
> > >
> > > I wanted to look into licensing a mobile repeater for portable
> > radio
> > > use.
> > >
> > > Details..........
> > >
> > > 2 ICOM IC- F121's one a receiver radio, and the other the
> transmit
> > > radio just like a normal repeater, but I want the transmitter
> (TX)
> > to
> > > transmit to my portable the traffic received on the RX radio (in
> > scan
> > > mode) .... and I want to be able to transmit from my portable to
> > > transmit one of the radios anyone know if this is possible or
> what
> > else
> > > I would have to come up with other then the 2 antennas, 2 radios,
> > and
> > > the repeater connection cables?
> > >
> > > Thanks
> > >
> >
>
Oct 31, 2007
RE:My Five MTX-8000 Motorola Radio's
Dear Adan:
I have five Boat Anchors (5- MTX-8000) 3-watt Radio's
that are so old that I can't get rid of them so I use
them for Boat Anchors and or paper weights, so good
Luck.
73,s
KA6AXN
--- ADAN GUILLEN <inetcgr@...> wrote:
> HI TO ALL, I HAVE A MTX8000 SMARTNET 800 MHZ RADIO.
> THE MODEL IS
> H01UCH6DB7AN. ITS FULL KEYPAD. GOOD WORKING. CONTACT
> ME IF INTERESTED
>
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
You might even reset the flex cable from the case to the board.
Wayne Thomas <kg4muc@...> wrote: If the repeater is CTCSS
protected on the RX you must have that part
correct otherwise you shouldn't be able to access the repeater at all.
Try monitoring your TX freq(rptr input) with a scanner for audio,if its
there there may be an issue with the repeater if not there check with a
speaker mic if you have one. I cant remember having a mic problem with
these and we have a fleet of 30 +.
Good Luck!
Wayne
resdon111 wrote:
>
> I'm having trouble programming PL tones into my TK-280.
> For some reason repeaters wont accept my audio. I key the PTT, and
> say "KC9MLP test", but all my scanner does is give me the courtesy
> tone, none of my voice. I tried having my friend in Milwaukee tune
> his scanner in to make sure I just wasnt overpowering my own, but all
> he gets is the courtesy tone as well. Any help?
>
>
[Non-text portions of this message have been removed]
--- In radio-programming@yahoogroups.com, Wayne Thomas <kg4muc@...> wrote:
>
> If the repeater is CTCSS protected on the RX you must have that part
> correct otherwise you shouldn't be able to access the repeater at all.
>
> Try monitoring your TX freq(rptr input) with a scanner for audio,if its
> there there may be an issue with the repeater if not there check with a
> speaker mic if you have one. I cant remember having a mic problem with
> these and we have a fleet of 30 +.
>
> Good Luck!
>
> Wayne
>
>
>
>
> resdon111 wrote:
> >
> > I'm having trouble programming PL tones into my TK-280.
> > For some reason repeaters wont accept my audio. I key the PTT, and
> > say "KC9MLP test", but all my scanner does is give me the courtesy
> > tone, none of my voice. I tried having my friend in Milwaukee tune
> > his scanner in to make sure I just wasnt overpowering my own, but all
> > he gets is the courtesy tone as well. Any help?
> >
> >
>
Actually, turns out it was never a problem in the first place. I was
in fact overpowering my scanner and my friend must have just made a
mistake. I made contact with another HAM just fine and am set to run.
Thanks though!
If the repeater is CTCSS protected on the RX you must have that part
correct otherwise you shouldn't be able to access the repeater at all.
Try monitoring your TX freq(rptr input) with a scanner for audio,if its
there there may be an issue with the repeater if not there check with a
speaker mic if you have one. I cant remember having a mic problem with
these and we have a fleet of 30 +.
Good Luck!
Wayne
resdon111 wrote:
>
> I'm having trouble programming PL tones into my TK-280.
> For some reason repeaters wont accept my audio. I key the PTT, and
> say "KC9MLP test", but all my scanner does is give me the courtesy
> tone, none of my voice. I tried having my friend in Milwaukee tune
> his scanner in to make sure I just wasnt overpowering my own, but all
> he gets is the courtesy tone as well. Any help?
>
>
--- In radio-programming@yahoogroups.com, "resdon111" <resdon111@...>
wrote:
>
> I'm having trouble programming PL tones into my TK-280.
> For some reason repeaters wont accept my audio. I key the PTT, and
> say "KC9MLP test", but all my scanner does is give me the courtesy
> tone, none of my voice. I tried having my friend in Milwaukee tune
> his scanner in to make sure I just wasnt overpowering my own, but all
> he gets is the courtesy tone as well. Any help?
>
By the way, the program used for programming is KPH-49D
I'm having trouble programming PL tones into my TK-280.
For some reason repeaters wont accept my audio. I key the PTT, and
say "KC9MLP test", but all my scanner does is give me the courtesy
tone, none of my voice. I tried having my friend in Milwaukee tune
his scanner in to make sure I just wasnt overpowering my own, but all
he gets is the courtesy tone as well. Any help?
I need the same
----- Original Message ----
From: scanner4 <scanner4@...>
To: radio-programming@yahoogroups.com
Sent: Monday, October 29, 2007 6:41:27 PM
Subject: [radio-prog@yhgrps] CDM1250
Hello good folks of the Programming community,
I'm looking for the RSS for a UHF CDM-1250
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
All kidding aside, wouldn't it be prudent to purchase the service manual for
the Minitor III, and use the instructions contained therein for performing
maintenance thereon? Call 800-422-4210 to identify and purchase the manual.
73, Eric Lemmon WB6FLY
-----Original Message-----
From: radio-programming@yahoogroups.com
[mailto:radio-programming@yahoogroups.com] On Behalf Of n2hyo
Sent: Tuesday, October 30, 2007 6:49 PM
To: radio-programming@yahoogroups.com
Subject: Re: [radio-prog@yhgrps] Help opening a Motorola Minitor III Pager.
Yes i imagine that is the way most of them get opened.
But in this case i would like to be able to close it again. lo
--- In radio-programming@yahoogroups.com
<mailto:radio-programming%40yahoogroups.com> , steve bucknam
<big_bad_wolf_74@...> wrote:
>
> I have found that most Fire pagers open quite well
> when you drop them on pavement while your in a rush to
> a call. LOL.
>
> --- Randal Toews <rts1360@...> wrote:
>
> > There are 4 loop like latches 2 on each side and
> > most of the time they break
> > when you pry it apart.
> >
> > On 10/29/07, n2hyo <mike@...> wrote:
> > >
> > > Almost feel embarrassed to ask, but how in the heck
> > do you open a
> > > Motorola Minitor III pager? I have removed the
> > screw in the lower
> > > center back and it looks as though the back should
> > slide down
> > > but i can not get it to budge. Is there a secret
> > latch somewhere,
> > > i looked uder the belt clip and do not see another
> > screw. I want to
> > > give the squelch pot a little turn to loosen it up.
> > >
> > > Thanks Mike
> > >
> > >
> > >
> >
> >
> >
> > --
> > Randal Toews
> > 780-354-8119 Home
> > 530-330-2937 Mobile
> >
> >
> > [Non-text portions of this message have been
> > removed]
> >
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com <http://mail.yahoo.com>
>
Yes i imagine that is the way most of them get opened.
But in this case i would like to be able to close it again. lo
--- In radio-programming@yahoogroups.com, steve bucknam
<big_bad_wolf_74@...> wrote:
>
> I have found that most Fire pagers open quite well
> when you drop them on pavement while your in a rush to
> a call. LOL.
>
> --- Randal Toews <rts1360@...> wrote:
>
> > There are 4 loop like latches 2 on each side and
> > most of the time they break
> > when you pry it apart.
> >
> > On 10/29/07, n2hyo <mike@...> wrote:
> > >
> > > Almost feel embarased to ask but how in the heck
> > do you open a
> > > Motorola Minitor III pager? I have removed the
> > screw in the lower
> > > center back and it looks as though the back should
> > slide down
> > > but i can not get it to budge. Is there a secret
> > latch somewhere,
> > > i looked uder the belt clip and do not see another
> > screw. I want to
> > > give the squelch pot a little turn to losen it up.
> > >
> > > Thanks Mike
> > >
> > >
> > >
> >
> >
> >
> > --
> > Randal Toews
> > 780-354-8119 Home
> > 530-330-2937 Mobile
> >
> >
> > [Non-text portions of this message have been
> > removed]
> >
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
Email sent to the Great White North.
--
Sincerely,
Jason Cato
gunman@...http://www.cato2000.com/Jason/
----------------------------------------
"Eviscerate the Proletariat!"
-Stewie Griffin
http://www.pyramidcomm.com/ builds exactly what you are describing.
Complete with radio and controller.
See them on sleazeBay for $50-75.
Walter
--- In radio-programming@yahoogroups.com, "Mike" <cifn2@...> wrote:
>
> What I guess I should call it is, a mobile extender........
>
> --- In radio-programming@yahoogroups.com, "Mike" <cifn2@> wrote:
> >
> > I have been thinking if it would even be possible to work it, but
I
> > cannot find any information about it or even know if it is
feasible.
> >
> > I wanted to look into licensing a mobile repeater for portable
> radio
> > use.
> >
> > Details..........
> >
> > 2 ICOM IC- F121's one a receiver radio, and the other the
transmit
> > radio just like a normal repeater, but I want the transmitter
(TX)
> to
> > transmit to my portable the traffic received on the RX radio (in
> scan
> > mode) .... and I want to be able to transmit from my portable to
> > transmit one of the radios anyone know if this is possible or
what
> else
> > I would have to come up with other then the 2 antennas, 2 radios,
> and
> > the repeater connection cables?
> >
> > Thanks
> >
>
Hi just a quick question will the software for my f1010 programme the f510
series if not which one do i need thanks in advance tony
---------------------------------
For ideas on reducing your carbon footprint visit Yahoo! For Good this month.
[Non-text portions of this message have been removed]
Good luck finding info on standard gx models buddy with this group or
anwhere else I have been looking for 2 week I got a killer deal on a gx3200 that
works but all I found was a cheap program cable on Ebay and software under files
on this site but finding a manual, and you will need it on these radios, is
almost impossible..Stan </HTML>
[Non-text portions of this message have been removed]
I have found that most Fire pagers open quite well
when you drop them on pavement while your in a rush to
a call. LOL.
--- Randal Toews <rts1360@...> wrote:
> There are 4 loop like latches 2 on each side and
> most of the time they break
> when you pry it apart.
>
> On 10/29/07, n2hyo <mike@...> wrote:
> >
> > Almost feel embarased to ask but how in the heck
> do you open a
> > Motorola Minitor III pager? I have removed the
> screw in the lower
> > center back and it looks as though the back should
> slide down
> > but i can not get it to budge. Is there a secret
> latch somewhere,
> > i looked uder the belt clip and do not see another
> screw. I want to
> > give the squelch pot a little turn to losen it up.
> >
> > Thanks Mike
> >
> >
> >
>
>
>
> --
> Randal Toews
> 780-354-8119 Home
> 530-330-2937 Mobile
>
>
> [Non-text portions of this message have been
> removed]
>
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Hello and 73's of Eddy ON7GE.
I am looking for software and software eventually doc on STANDARD
GX2010,
For reprogramming in our VHF band.
Thank you for your dedication.
There are 4 loop like latches 2 on each side and most of the time they break
when you pry it apart.
On 10/29/07, n2hyo <mike@...> wrote:
>
> Almost feel embarased to ask but how in the heck do you open a
> Motorola Minitor III pager? I have removed the screw in the lower
> center back and it looks as though the back should slide down
> but i can not get it to budge. Is there a secret latch somewhere,
> i looked uder the belt clip and do not see another screw. I want to
> give the squelch pot a little turn to losen it up.
>
> Thanks Mike
>
>
>
--
Randal Toews
780-354-8119 Home
530-330-2937 Mobile
[Non-text portions of this message have been removed]
Offline 
Send Email
Online Now 
