hi all..seems i need to use a eprom burner to program the fm900 me and
my son have..i,m from lilydale in melb if any one can help us out it
would be great.we can travel to any part of melb for help and can pay
for anything we may need(if not to much..lol)...thans all...jim

whats ur web site. ill check it out

--- Cato Andrč Pettersen <catopett@...> wrote:

> For you out there, i do have som software to
> motorolaradios to share.
> I do put it out on my domains, if you want to have
> it..
>
> mail me @ motorolasoft at datateknikk.no cause
> spambots, do change, at,
> with, @
>
>




________________________________________________________________________________\
____
The fish are biting.
Get more visitors on your site using Yahoo! Search Marketing.
http://searchmarketing.yahoo.com/arp/sponsoredsearch_v2.php

If anyone has this backissue I need a scan of the artical on gwiz
boards. I have a used board but no istall instructions. Thanks in
advance.

For you out there, i do have som software to motorolaradios to share.
I do put it out on my domains, if you want to have it..

mail me @ motorolasoft at datateknikk.no cause spambots, do change, at,
with, @

Latitude D600 should be using the built in com port as a native COM1 as
the pointing device and touch pad ARE NOT BOUND TO A COM PORT


________________________________

From: radio-programming@yahoogroups.com
[mailto:radio-programming@yahoogroups.com] On Behalf Of Duncan Hawkins
Sent: Thursday, March 08, 2007 07:47
To: radio-programming@yahoogroups.com
Subject: Re: [radio-prog@yhgrps] Re: VERTEX VX 180 PROGRAMMING CABLE



I don't know if a dell latitude is a desktop or laptop, but if it's a
laptop
I suspect you will need to try COM2 as most laptops have COM1 as the
pointing device.

Duncan
www.radiospares.co.uk

On 3/8/07, haken459 <haken459@... <mailto:haken459%40yahoo.com> >
wrote:
>
> --- In radio-programming@yahoogroups.com
<mailto:radio-programming%40yahoogroups.com>
<radio-programming%40yahoogroups.com>,
> "Mike" <nppd113@...> wrote:
> >
> > --- In radio-programming@yahoogroups.com
<mailto:radio-programming%40yahoogroups.com>
<radio-programming%40yahoogroups.com>,
> "haken459" <haken459@>
> > wrote:
> > >
> > > I RECENTLY PURCHASED A RIBLESS CABLE AND CANNOT GET IT TO WORK.
> THE
> > > COMPUTER DOES NOT RECOGNIZE THE RADIO. ANY ADVICE?
> > >
> >
> > What type of computer are you trying to run it on? What version of
> the
> > software do you have? are you trying to use it with a USB adapter?
> >
> Dell latitude d600, and using a 9 pin serail on com1
>
>
>

[Non-text portions of this message have been removed]






[Non-text portions of this message have been removed]

I don't know if a dell latitude is a desktop or laptop, but if it's a laptop
I suspect you will need to try COM2 as most laptops have COM1 as the
pointing device.

Duncan
www.radiospares.co.uk





On 3/8/07, haken459 <haken459@...> wrote:
>
>   --- In
radio-programming@yahoogroups.com<radio-programming%40yahoogroups.com>,
> "Mike" <nppd113@...> wrote:
> >
> > --- In
radio-programming@yahoogroups.com<radio-programming%40yahoogroups.com>,
> "haken459" <haken459@>
> > wrote:
> > >
> > > I RECENTLY PURCHASED A RIBLESS CABLE AND CANNOT GET IT TO WORK.
> THE
> > > COMPUTER DOES NOT RECOGNIZE THE RADIO. ANY ADVICE?
> > >
> >
> > What type of computer are you trying to run it on? What version of
> the
> > software do you have? are you trying to use it with a USB adapter?
> >
> Dell latitude d600, and using a 9 pin serail on com1
>
>
>


[Non-text portions of this message have been removed]

--- In radio-programming@yahoogroups.com, "Mike" <nppd113@...> wrote:
>
> --- In radio-programming@yahoogroups.com, "haken459" <haken459@>
> wrote:
> >
> > I RECENTLY PURCHASED A RIBLESS CABLE AND CANNOT GET IT TO WORK.
THE
> > COMPUTER DOES NOT RECOGNIZE THE RADIO.  ANY ADVICE?
> >
>
> What type of computer are you trying to run it on?  What version of
the
> software do you have?  are you trying to use it with a USB adapter?
>
Dell latitude d600, and using a 9 pin serail on com1

--- In radio-programming@yahoogroups.com, "mike-g7bnf" <mike-
g7bnf@...> wrote:
>
> IS  IT finding the com port?
>
> mike
>
> ----- Original Message -----
> From: "haken459" <haken459@...>
> To: <radio-programming@yahoogroups.com>
> Sent: Thursday, March 08, 2007 12:14 AM
> Subject: [radio-prog@yhgrps] VERTEX VX 180 PROGRAMMING CABLE
>
>
> >I RECENTLY PURCHASED A RIBLESS CABLE AND CANNOT GET IT TO WORK.
THE
> > COMPUTER DOES NOT RECOGNIZE THE RADIO.  ANY ADVICE?
> >
> > How can I tell? I am using a Dell LAtitude D600 laptop. Is it too
fast to do this. I am using the 9 pin serial on com1.
> >
> >
> > Community email addresses:
> >  Post message: radio-programming@yahoogroups.com
> >  Subscribe:    radio-programming-subscribe@yahoogroups.com
> >  Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
> >  List owner:   radio-programming-owner@yahoogroups.com
> >
> > Shortcut URL to this page:
> >  http://www.yahoogroups.com/community/radio-programming
> > Yahoo! Groups Links
> >
> >
> >
>

Absolutely correct. As you see I transposed the number to TK-390.
Sorry about that!



--- In radio-programming@yahoogroups.com, "Yahoo" <yahoo@...> wrote:
>
>  The software for a TK-930 is KPG5D. DOS only, never tried it on
anything
> faster than a PII 500. KPG38D is for programming a TK290/390
>
> Jeff
>
> -----Original Message-----
> From: radio-programming@yahoogroups.com
> [mailto:radio-programming@yahoogroups.com] On Behalf Of petey_racer
> Sent: Wednesday, March 07, 2007 5:33 PM
> To: radio-programming@yahoogroups.com
> Subject: [radio-prog@yhgrps] Re: Kenwood TK-840 setting squelch,
power, test
> mode help!
>
> The software you need is kpg38d. It can be found at several web
sites if you
> cannot find a dealer.
>
> Just a note. It is best to start a new thread or topic with an off topic
> question such as yours. This helps lessen confusion as to who is
answering
> what questions or topics.
>
>
> --- In radio-programming@yahoogroups.com, Dalton <dalton9691@> wrote:
> >
> > do you know what software i would need for the tk930?
> > and what  speed PC and cables? it was an impulse buy lol
> >
> >
> > help...
> > --- petey_racer <petey_racer@> wrote:
> >
> > > After changing the value I am able to set that number by hitting
the
> > > AUX button.
> > > I am also wondering if there is any online documentation on this
> > > radio. I have three of the them and would like to get to know more
> > > about them other than the software program, which I have pretty
much
> > > figured out.
> > >
> > >
> > >
> > >
> > > --- In radio-programming@yahoogroups.com, "kb1we6r"
> > > <capyo670@> wrote:
> > > >
> > > > I have a TK-840 and KPG25D V2.01
> > > > No problems reading and writing.
> > > >
> > > > I need to set the squelch and output power.
> > > > When I select "test mode" radio displays 4 - 1 ,
> > > software times out
> > > > and says check connection.
> > > > If I power on radio while holding the right GRP
> > > button, I get into
> > > > some kind of programming mode and can change the
> > > power.
> > > > But how do I permanitly program that setting????
> > > >
> > > > Any full help in this area would be GREATLY
> > > appreciated!
> > > > Thanks
> > > > ... Keith WE6R
> > > >
> > >
> > >
> > >
> >
> >
>

The software for a TK-930 is KPG5D. DOS only, never tried it on anything
faster than a PII 500. KPG38D is for programming a TK290/390

Jeff

-----Original Message-----
From: radio-programming@yahoogroups.com
[mailto:radio-programming@yahoogroups.com] On Behalf Of petey_racer
Sent: Wednesday, March 07, 2007 5:33 PM
To: radio-programming@yahoogroups.com
Subject: [radio-prog@yhgrps] Re: Kenwood TK-840 setting squelch, power, test
mode help!

The software you need is kpg38d. It can be found at several web sites if you
cannot find a dealer.

Just a note. It is best to start a new thread or topic with an off topic
question such as yours. This helps lessen confusion as to who is answering
what questions or topics.


--- In radio-programming@yahoogroups.com, Dalton <dalton9691@...> wrote:
>
> do you know what software i would need for the tk930?
> and what  speed PC and cables? it was an impulse buy lol
>
>
> help...
> --- petey_racer <petey_racer@...> wrote:
>
> > After changing the value I am able to set that number by hitting the
> > AUX button.
> > I am also wondering if there is any online documentation on this
> > radio. I have three of the them and would like to get to know more
> > about them other than the software program, which I have pretty much
> > figured out.
> >
> >
> >
> >
> > --- In radio-programming@yahoogroups.com, "kb1we6r"
> > <capyo670@> wrote:
> > >
> > > I have a TK-840 and KPG25D V2.01
> > > No problems reading and writing.
> > >
> > > I need to set the squelch and output power.
> > > When I select "test mode" radio displays 4 - 1 ,
> > software times out
> > > and says check connection.
> > > If I power on radio while holding the right GRP
> > button, I get into
> > > some kind of programming mode and can change the
> > power.
> > > But how do I permanitly program that setting????
> > >
> > > Any full help in this area would be GREATLY
> > appreciated!
> > > Thanks
> > > ... Keith WE6R
> > >
> >
> >
> >
>
>

The software you need is kpg38d. It can be found at several web sites
if you cannot find a dealer.

Just a note. It is best to start a new thread or topic with an off
topic question such as yours. This helps lessen confusion as to who is
answering what questions or topics.


--- In radio-programming@yahoogroups.com, Dalton <dalton9691@...> wrote:
>
> do you know what software i would need for the tk930?
> and what  speed PC and cables? it was an impulse buy
> lol
>
>
> help...
> --- petey_racer <petey_racer@...> wrote:
>
> > After changing the value I am able to set that
> > number by hitting the
> > AUX button.
> > I am also wondering if there is any online
> > documentation on this
> > radio. I have three of the them and would like to
> > get to know more
> > about them other than the software program, which I
> > have pretty much
> > figured out.
> >
> >
> >
> >
> > --- In radio-programming@yahoogroups.com, "kb1we6r"
> > <capyo670@> wrote:
> > >
> > > I have a TK-840 and KPG25D V2.01
> > > No problems reading and writing.
> > >
> > > I need to set the squelch and output power.
> > > When I select "test mode" radio displays 4 - 1 ,
> > software times out
> > > and says check connection.
> > > If I power on radio while holding the right GRP
> > button, I get into
> > > some kind of programming mode and can change the
> > power.
> > > But how do I permanitly program that setting????
> > >
> > > Any full help in this area would be GREATLY
> > appreciated!
> > > Thanks
> > > ... Keith WE6R
> > >
> >
> >
> >
>
>
>
>
>
________________________________________________________________________________\
____
> Finding fabulous fares is fun.
> Let Yahoo! FareChase search your favorite travel sites to find
flight and hotel bargains.
> http://farechase.yahoo.com/promo-generic-14795097
>

IS  IT finding the com port?

mike

----- Original Message -----
From: "haken459" <haken459@...>
To: <radio-programming@yahoogroups.com>
Sent: Thursday, March 08, 2007 12:14 AM
Subject: [radio-prog@yhgrps] VERTEX VX 180 PROGRAMMING CABLE


>I RECENTLY PURCHASED A RIBLESS CABLE AND CANNOT GET IT TO WORK.  THE
> COMPUTER DOES NOT RECOGNIZE THE RADIO.  ANY ADVICE?
>
>
>
>
> Community email addresses:
>  Post message: radio-programming@yahoogroups.com
>  Subscribe:    radio-programming-subscribe@yahoogroups.com
>  Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
>  List owner:   radio-programming-owner@yahoogroups.com
>
> Shortcut URL to this page:
>  http://www.yahoogroups.com/community/radio-programming
> Yahoo! Groups Links
>
>
>

--- In radio-programming@yahoogroups.com, "haken459" <haken459@...>
wrote:
>
> I RECENTLY PURCHASED A RIBLESS CABLE AND CANNOT GET IT TO WORK.  THE
> COMPUTER DOES NOT RECOGNIZE THE RADIO.  ANY ADVICE?
>

What type of computer are you trying to run it on?  What version of the
software do you have?  are you trying to use it with a USB adapter?

do you know what software i would need for the tk930?
and what  speed PC and cables? it was an impulse buy
lol


help...
--- petey_racer <petey_racer@...> wrote:

> After changing the value I am able to set that
> number by hitting the
> AUX button.
> I am also wondering if there is any online
> documentation on this
> radio. I have three of the them and would like to
> get to know more
> about them other than the software program, which I
> have pretty much
> figured out.
>
>
>
>
> --- In radio-programming@yahoogroups.com, "kb1we6r"
> <capyo670@...> wrote:
> >
> > I have a TK-840 and KPG25D V2.01
> > No problems reading and writing.
> >
> > I need to set the squelch and output power.
> > When I select "test mode" radio displays 4 - 1 ,
> software times out
> > and says check connection.
> > If I power on radio while holding the right GRP
> button, I get into
> > some kind of programming mode and can change the
> power.
> > But how do I permanitly program that setting????
> >
> > Any full help in this area would be GREATLY
> appreciated!
> > Thanks
> > ... Keith WE6R
> >
>
>
>




________________________________________________________________________________\
____
Finding fabulous fares is fun.
Let Yahoo! FareChase search your favorite travel sites to find flight and hotel
bargains.
http://farechase.yahoo.com/promo-generic-14795097

http://www.ajpotts.fsnet.co.uk/Scanner-Manuals.html
might help or rigpix site

mike g7bnf
----- Original Message -----
From: "Victor D. Erickson (Vic)" <vderickson@...>
To: <Undisclosed-Recipient:;>
Sent: Wednesday, March 07, 2007 11:56 PM
Subject: [radio-prog@yhgrps] Looking for a PRO - 31 Manual


> Hi All;
>
> I know this is something that is probably on the Radio Shack Website,
> However I wasn't able to find it on their web site and I did a search for
> it and the only one I found so far was one that one that looked as if it
> was ran though a bad copy machine and then turned into a PDF file.
>
> I am looking for the manual and possibly the scamadics for the Radio Shack
> PRO 31 for a friend of mine at work.
>
> Any leads or ideas please.
>
> Vic Erickson
> GMRS License: WQGK844
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Community email addresses:
>  Post message: radio-programming@yahoogroups.com
>  Subscribe:    radio-programming-subscribe@yahoogroups.com
>  Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
>  List owner:   radio-programming-owner@yahoogroups.com
>
> Shortcut URL to this page:
>  http://www.yahoogroups.com/community/radio-programming
> Yahoo! Groups Links
>
>
>

I RECENTLY PURCHASED A RIBLESS CABLE AND CANNOT GET IT TO WORK.  THE
COMPUTER DOES NOT RECOGNIZE THE RADIO.  ANY ADVICE?

Hi All;

I know this is something that is probably on the Radio Shack Website, However I
wasn't able to find it on their web site and I did a search for it and the only
one I found so far was one that one that looked as if it was ran though a bad
copy machine and then turned into a PDF file.

I am looking for the manual and possibly the scamadics for the Radio Shack PRO
31 for a friend of mine at work.

Any leads or ideas please.

Vic Erickson
GMRS License: WQGK844

[Non-text portions of this message have been removed]

After changing the value I am able to set that number by hitting the
AUX button.
I am also wondering if there is any online documentation on this
radio. I have three of the them and would like to get to know more
about them other than the software program, which I have pretty much
figured out.




--- In radio-programming@yahoogroups.com, "kb1we6r" <capyo670@...> wrote:
>
> I have a TK-840 and KPG25D V2.01
> No problems reading and writing.
>
> I need to set the squelch and output power.
> When I select "test mode" radio displays 4 - 1 , software times out
> and says check connection.
> If I power on radio while holding the right GRP button, I get into
> some kind of programming mode and can change the power.
> But how do I permanitly program that setting????
>
> Any full help in this area would be GREATLY appreciated!
> Thanks
> ... Keith WE6R
>

i just had my mts 2000 repaired from moto. and was wondering how to
tell what they used to program it. i was told that they may of used the
CPS software... if not what RSS version would I need or what CPS
version would I need for it?

Region not supported means you are using software from a different
region of the world than the radio.

CM300 radio is a US model. You must use US software for this. The same
radio is marketed under different model numbers in different regions.
Example Latin America, Asia, and Europe. Your software must match your
radio. I would guess your software is for one of the other regions.

Before anyone asks, I can not send this software. Hope this info helps.

John Liguori
Spectrum Communications
Kenvil, NJ
www.spectrum2way.com

--- In radio-programming@yahoogroups.com, "Robert" <newcomer2438@...>
wrote:
>
> Hi there can anyone help me out with an error code of 40040 (region
> not supported)when I attempt to read the radio, the status bar reaches
> the end before I get the message.
>
> Many thanks
>
> Rob
>

hi all..i,m only new to this after geting divorced me and my son got in to
radios..which has turned in to bad luck(again) we have brought some phillips
fm900 radios then when we got then home we found they have nothing programed
on then..can anyone please help us put somethin on them so we can talk to
each other when he is with his mum(not that far away)any help would be great
   cheers jim

_________________________________________________________________
Join the millions of Australians using Live Search. Try live.com.au
http://ninemsn.com.au/share/redir/adTrack.asp?mode=click&clientID=740&referral=m\
illion&URL=http://live.com.au

Hi there can anyone help me out with an error code of 40040 (region
not supported)when I attempt to read the radio, the status bar reaches
the end before I get the message.

Many thanks

Rob

FURTHER MORE>>>>>>

if you have a PDF of the L1159A would you please contact me directly.

Evans

-----Original Message-----
From: radio-programming@yahoogroups.com
[mailto:radio-programming@yahoogroups.com]On Behalf Of Evans F. Mitchell;
KD4EFM / AFA2TH / WQFK-894
Sent: Tuesday, March 06, 2007 9:20 PM
To: Radio-Programming@Yahoogroups. Com (E-mail)
Subject: [radio-prog@yhgrps] NEED HELP, MRTI model L1159A info needed


Need info on how to change the dial parameter, and how to change the access
and deaccess codes...

Evans F. Mitchell
KD4EFM / AFA2TH FL; USAF MARS
GMRS: WQFK894
WCF Section ARRL Member

ARRL WCF Section Web Site
http://www.arrlwcf.org
Polk County ARES Web site
http://www.polkemcomm.org
<kd4efm hotmail com> alt box






[Non-text portions of this message have been removed]

Need info on how to change the dial parameter, and how to change the access
and deaccess codes...


Evans F. Mitchell
KD4EFM / AFA2TH FL; USAF MARS
GMRS: WQFK894
WCF Section ARRL Member

ARRL WCF Section Web Site
http://www.arrlwcf.org
Polk County ARES Web site
http://www.polkemcomm.org
<kd4efm hotmail com> alt box

What, if anything, in programming would cause an MDX mobile not to
mute/detect data stream events after a user unkeys?

Keep getting a loud noise burst similar to a squelch tail and a
couple "beeps" during receive.

The radio follows talkgroup and frequency tracking just fine.

Signal strength is full quieting.

I am looking for hamradioenthusiasts that can help building
new type forums for use in examing new hamradioenthusiasts.

http://forum.datateknikk.no/
DO use ONLY correct mailaddresses as you have to activate with it!

Hi
I trying to program a CP200 but being UK based don't have a USA copy of the
CP200 program. In the UK its called the CP040 but is fundamentally the same
radio but the CP040 program cannot program the CP200 radio.
Can anyone help out ?

Many thanks

Tom

David,
You're right on the money with your suggestion on Com ports.  I changed the Com
port, and the software (version 1.10, not 2.0 like I had thought) worked great. 
I now have the frequencies in place and working fine.  Good Call.
Thanks for your input on this issue.
Chris

David <packet9600@...> wrote:                                  --- In
radio-programming@yahoogroups.com, "bwha38" <bwha38@...> wrote:
  >
  > I recently obtained a Vertex vx-2000u 4-channel mobile.  I also have
  > the CE-20 v. 2 software and ribless programmer.
  >
  > I have not been able to read (upload) its data into my slow, DOS
  > computer.  I see another similar posting in the group.  Perhaps it
  is
  > the same problem.  Radio appears to write, but when frequencies are
  > checked, radio does not transmit nor receive them.
  >
  > Running in DOS, using the -p switch to enable changing from VHF to
  > UHF...any help is appreciated.
  >

  Hi Bhwa,

  Here's some thoughts:

  1.  The last CE20 that was released was v1.12 as far as I know.  If
  you have a "v. 2" of something, check carefully to be sure that it
  really is CE20 for VX-2000.

  2.  If you have a Vertex factory-made VPL-1 cable, hopefully you are
  using a newer one made with round black cable and NOT flat white
  cable.  The ones made of flat white cable often don't work on VX-2000
  and later models.

  3.  When the radio is connected to the programming computer and CE20
  has control of the COM port, the CH 1 LED on the radio should blink.
  If it doesn't, the radio is not in programming mode.  Check:
  - No other driver software (like a mouse driver?) is using this COM
  port.  This is often the hidden culprit in failure to communicate
  problems, even when some other Vertex CExx programs WILL work ok.
  - Correct COM port is selected in CE20 (File -> Configure).
  - No dislodged contact pin in the radio's mic jack (I have actually
  seen this).

  4.  If the CH 1 LED IS blinking when connected, select Radio ->
  Upload and, when prompted, press the A button on the radio to send
  the data into the computer.  Once complete, you should get something
  similar to "Old data not saved.  Load new data anyway?" and a Yes/No
  selection.  Select Yes and the new data (that which was just read
  from the radio) will appear on the screen and be available.  Edit
  this data, then send it back to the radio via the Radio -> Download
  function.

  5.  (Again, if I remember correctly) During download, CE20 will
  just "dump" programming data out the COM port without requiring a
  checksum handshake at the end.  Thus the process appears to have
  completed, but the old data is not overwritten in the radio if the
  data doesn't actually go all the way through.  The only ways to
  confirm are:
  - Upload from the radio to see if new data is in fact present, or
  - Check operation on new frequency(ies).

  If none of this helps, please re-post to the Group the details of
  your computer, OS, VPL-1 cable, and CE20 version and we'll see if we
  can sniff-out the problem.  Good luck.

  73 de David, N6HEV, packet9600






[Non-text portions of this message have been removed]

--- In radio-programming@yahoogroups.com, "bwha38" <bwha38@...> wrote:
>
> I recently obtained a Vertex vx-2000u 4-channel mobile.  I also have
> the CE-20 v. 2 software and ribless programmer.
>
> I have not been able to read (upload) its data into my slow, DOS
> computer.  I see another similar posting in the group.  Perhaps it
is
> the same problem.  Radio appears to write, but when frequencies are
> checked, radio does not transmit nor receive them.
>
> Running in DOS, using the -p switch to enable changing from VHF to
> UHF...any help is appreciated.
>

Hi Bhwa,

Here's some thoughts:

1.  The last CE20 that was released was v1.12 as far as I know.  If
you have a "v. 2" of something, check carefully to be sure that it
really is CE20 for VX-2000.

2.  If you have a Vertex factory-made VPL-1 cable, hopefully you are
using a newer one made with round black cable and NOT flat white
cable.  The ones made of flat white cable often don't work on VX-2000
and later models.

3.  When the radio is connected to the programming computer and CE20
has control of the COM port, the CH 1 LED on the radio should blink.
If it doesn't, the radio is not in programming mode.  Check:
- No other driver software (like a mouse driver?) is using this COM
port.  This is often the hidden culprit in failure to communicate
problems, even when some other Vertex CExx programs WILL work ok.
- Correct COM port is selected in CE20 (File -> Configure).
- No dislodged contact pin in the radio's mic jack (I have actually
seen this).

4.  If the CH 1 LED IS blinking when connected, select Radio ->
Upload and, when prompted, press the A button on the radio to send
the data into the computer.  Once complete, you should get something
similar to "Old data not saved.  Load new data anyway?" and a Yes/No
selection.  Select Yes and the new data (that which was just read
from the radio) will appear on the screen and be available.  Edit
this data, then send it back to the radio via the Radio -> Download
function.

5.  (Again, if I remember correctly) During download, CE20 will
just "dump" programming data out the COM port without requiring a
checksum handshake at the end.  Thus the process appears to have
completed, but the old data is not overwritten in the radio if the
data doesn't actually go all the way through.  The only ways to
confirm are:
- Upload from the radio to see if new data is in fact present, or
- Check operation on new frequency(ies).

If none of this helps, please re-post to the Group the details of
your computer, OS, VPL-1 cable, and CE20 version and we'll see if we
can sniff-out the problem.  Good luck.


73 de David, N6HEV, packet9600

I have the software, ce44, but I can't seem to get it to work. The
radio doesn,t respond, any Ideas?, Dusty