radio-programming : Messages : 16624-16653 of 82783

Messages: Show Message Summaries (Group by Topic) Sort by Date

#16653 From: Sixkiller <sixkiller@...>
Date: Fri Aug 1, 2003 9:06 am
Subject: Re: [radio-prog@yhgrps] Rib box Fs vr100vr
Offline
Send Email

Hi


Whoever needs Best quality Motorola R.I.B boxes , can purchase from me  !!

see them at  http://www.commselect.net/prod03.htm


Best regards


Commselect Inc.







At 08:55 PM 7/31/03 +0000, you wrote:
>Hi all i got a rib box im wanting to sale its a sandy ganz board
>installed in a project box all parts are new used the box 5 times
>works grate works with gp300 software im wanting $85 for the box if
>you want to buy this just let me know reply to charles789@...
>73s kc5cxu
>
>
>
>
>Community email addresses:
>   Post message: radio-programming@yahoogroups.com
>   Subscribe:    radio-programming-subscribe@yahoogroups.com
>   Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
>   List owner:   radio-programming-owner@yahoogroups.com
>
>Shortcut URL to this page:
>   http://www.yahoogroups.com/community/radio-programming
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Reply | Messages in this Topic (10)

#16652 From: Chas Downey <kd7amq@...>
Date: Fri Aug 1, 2003 6:22 am
Subject: ComNet Ericsson Panther 600P Programming cable & software? kd7amq
Offline
Send Email

Greetings,

I'm looking for the programming software and cable or directions to build one, for the ComNet Ericsson Panther 600P UHF handheld radio. I understand that the radio is similar to a Tate brand radio. Any help or input on this will be greatly appriciated.

Thanks,

~Charles Downey

KD7AMQ

Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software

Reply | Messages in this Topic (1)

#16651 From: "Steve" <Cobray380@...>
Date: Fri Aug 1, 2003 5:57 am
Subject: Re: [radio-prog@yhgrps] Syntor X9000 software problem cobray380
Offline
Send Email

There is no install file. Make sure that all the files are not set to Read-Only. At the main menu select "I" for installing the Com Port thats the only thing you need the install but if the files are set to Read-Only it will not change the file cfg and you will get the error.

Steve

----- Original Message -----

From: Brian

To: radio-programming@yahoogroups.com

Sent: Thursday, July 31, 2003 10:31 PM

Subject: [radio-prog@yhgrps] Syntor X9000 software problem

I am trying to run the software for the Syntor X9000, on a Tosheba Tecra 386. It keeps telling me "Installation file not present. Please install program." What am I doing wrong? Anyone else have this problem? How can I fix it? Brian D. Saylor Webmaster / Lieutenant / Radio Guru

Community email addresses: Post message: radio-programming@yahoogroups.com Subscribe: radio-programming-subscribe@yahoogroups.com Unsubscribe: radio-programming-unsubscribe@yahoogroups.com List owner: radio-programming-owner@yahoogroups.com Shortcut URL to this page: http://www.yahoogroups.com/community/radio-programming

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Reply | Messages in this Topic (1)

#16650 From: "bigmodaddydex" <bigmodaddydex@...>
Date: Fri Aug 1, 2003 5:19 am
Subject: Re: ht750 programing problems bigmodaddydex
Offline
Send Email

Duane,

I'm not sure if you are having same problem, but I corrected mine.  I
was able to program my HT750s with the R04.00 AA version that is on
the same web site.  If you are getting the 4-1379 error, the region
code does not match your software.

If you are getting the error message that your RIB or Radio is not
reponding, then you probably have a bad cable(ribless) or your COM
port is not working.  If you are able to use the COM port and it is
correctly set, I would say that you need a new cable.

Dexter

--- In radio-programming@yahoogroups.com, "suw_tech_1"
<suw_tech_1@y...> wrote:
> I have a ht750 and can't get it to program cannot read the radio
> tried using the ribless cable on batlabs and cannot get it to read
> with either cps v4 or the cps v6. I am running win xp and wonder if
> this could have anything to do with it? Also is there any special
key
> seq to use to put it in prog mode? I belive it is press the
softkeys
> above and below ptt and power on and i get a diffrent power on tone
> then followed a few seconds later by a solid tone help please any
> suggustions welcome....
> thanks
> duwane

Reply | Messages in this Topic (3)

#16649 From: "M. Walton" <wmwalton3@...>
Date: Fri Aug 1, 2003 3:22 am
Subject: RE: [radio-prog@yhgrps] RadioShack BTX-128 outlawryd
Offline
Send Email

I've got one too.

Let me know if you hear anything.

-----Original Message-----
From: Jake Meoff [mailto:scitech26@...]
Sent: Thursday, July 31, 2003 10:13 PM
To: radio-programming@yahoogroups.com
Subject: [radio-prog@yhgrps] RadioShack BTX-128

I have a radio shack model BTX-128 handheld UHF radio, does anyone know the programing sequence to get it on anything but the 5 preset channels(none of which I am licensed to use)? Any help will be appreciated ~Jake __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com

Community email addresses: Post message: radio-programming@yahoogroups.com Subscribe: radio-programming-subscribe@yahoogroups.com Unsubscribe: radio-programming-unsubscribe@yahoogroups.com List owner: radio-programming-owner@yahoogroups.com Shortcut URL to this page: http://www.yahoogroups.com/community/radio-programming

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Reply | Messages in this Topic (2)

#16648 From: "bigmodaddydex" <bigmodaddydex@...>
Date: Fri Aug 1, 2003 3:30 am
Subject: Re: ht750 programing problems bigmodaddydex
Offline
Send Email

Duane,

First of all, THANKS for the Russian Info.  I tried to program a
HT750 Version R05.06.03 with the CPS version R060.01 and got a 4-1379
Error.  Is this the same thing you are getting?  I wonder if this is
related to the CPS Version or the Region Code.

Dexter


--- In radio-programming@yahoogroups.com, "suw_tech_1"
<suw_tech_1@y...> wrote:
> I have a ht750 and can't get it to program cannot read the radio
> tried using the ribless cable on batlabs and cannot get it to read
> with either cps v4 or the cps v6. I am running win xp and wonder if
> this could have anything to do with it? Also is there any special
key
> seq to use to put it in prog mode? I belive it is press the
softkeys
> above and below ptt and power on and i get a diffrent power on tone
> then followed a few seconds later by a solid tone help please any
> suggustions welcome....
> thanks
> duwane

Reply | Messages in this Topic (3)

#16647 From: "suw_tech_1" <suw_tech_1@...>
Date: Fri Aug 1, 2003 2:31 am
Subject: ht750 programing problems suw_tech_1
Offline
Send Email

I have a ht750 and can't get it to program cannot read the radio
tried using the ribless cable on batlabs and cannot get it to read
with either cps v4 or the cps v6. I am running win xp and wonder if
this could have anything to do with it? Also is there any special key
seq to use to put it in prog mode? I belive it is press the softkeys
above and below ptt and power on and i get a diffrent power on tone
then followed a few seconds later by a solid tone help please any
suggustions welcome....
thanks
duwane

Reply | Messages in this Topic (3)

#16646 From: "Brian" <probie715@...>
Date: Fri Aug 1, 2003 2:31 am
Subject: Syntor X9000 software problem probie715
Offline
Send Email

I am trying to run the software for the Syntor X9000, on a Tosheba
Tecra 386.  It keeps telling me "Installation file not present.
Please install program."  What am I doing wrong?  Anyone else have
this problem?  How can I fix it?


Brian D. Saylor
Webmaster / Lieutenant / Radio Guru

Reply | Messages in this Topic (1)

#16645 From: Jake Meoff <scitech26@...>
Date: Fri Aug 1, 2003 2:12 am
Subject: RadioShack BTX-128 digital_r0y
Offline
Send Email

I have a radio shack model BTX-128 handheld UHF radio,
does anyone know the programing sequence to get it on
anything but the 5 preset channels(none of which I am
licensed to use)?

Any help will be appreciated

~Jake

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com

Reply | Messages in this Topic (2)

#16644 From: "John" <powersjohn@...>
Date: Fri Aug 1, 2003 1:27 am
Subject: Ritron RPM-150 powersjohnm
Offline
Send Email

Does anyone have programming software for the Ritron RPM-150 newer
than version 1.4 they would be willing to share?

John

Reply | Messages in this Topic (1)

#16643 From: privite privite <irollinghills@...>
Date: Thu Jul 31, 2003 11:49 pm
Subject: saber astro programming cable irollinghills
Offline
Send Email

Hi all.I am selling a aftermarket saber astro
programming cable.I lost the screw that keeps the
cable on the radio,but all you need to do is lay the
radio down & it will still program.ASking $45 I paid
over $100 for it.E-mail me off list please

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com

Reply | Messages in this Topic (1)

#16642 From: "Justin Albury" <justin@...>
Date: Thu Jul 31, 2003 9:43 pm
Subject: Re: [radio-prog@yhgrps] Rib box Fs jacomms
Offline
Send Email

were are you - whats your location????

Justin

----- Original Message -----
From: "Charles M" <charles789@...>
To: <radio-programming@yahoogroups.com>
Sent: Friday, August 01, 2003 6:55 AM
Subject: [radio-prog@yhgrps] Rib box Fs


> Hi all i got a rib box im wanting to sale its a sandy ganz board
> installed in a project box all parts are new used the box 5 times
> works grate works with gp300 software im wanting $85 for the box if
> you want to buy this just let me know reply to charles789@...
> 73s kc5cxu
>
>
>
>
> Community email addresses:
>   Post message: radio-programming@yahoogroups.com
>   Subscribe:    radio-programming-subscribe@yahoogroups.com
>   Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
>   List owner:   radio-programming-owner@yahoogroups.com
>
> Shortcut URL to this page:
>   http://www.yahoogroups.com/community/radio-programming
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Reply | Messages in this Topic (1)

#16641 From: Jay Linton <jjlcustoms@...>
Date: Thu Jul 31, 2003 9:39 pm
Subject: SABER III code plug needed!!!!! jjlcustoms
Offline
Send Email

Hello!

I am looking for a 'good' code plug that I can use to correct the error I am getting when I try to program my Saber III.

error = ERR 0 C1

Any help will be much appreciated.

Thanks in advance to all that reply-

JAYLINTON

KD6HXH

Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software

Reply | Messages in this Topic (1)

#16640 From: "Charles M" <charles789@...>
Date: Thu Jul 31, 2003 8:55 pm
Subject: Rib box Fs bluejay713
Offline
Send Email

Hi all i got a rib box im wanting to sale its a sandy ganz board
installed in a project box all parts are new used the box 5 times
works grate works with gp300 software im wanting $85 for the box if
you want to buy this just let me know reply to charles789@...
73s kc5cxu

Reply | Messages in this Topic (10)

#16639 From: "Paul" <prhare@...>
Date: Thu Jul 31, 2003 4:23 pm
Subject: Re: [radio-prog@yhgrps] Standard GX1500U ve9nch
Offline
Send Email

Sherman I also need software for GX1500.where can I get it?I am also in need of a program cable.Paul

----- Original Message -----

From: shanermn

To: radio-programming@yahoogroups.com

Sent: Wednesday, July 30, 2003 10:13 PM

Subject: [radio-prog@yhgrps] Standard GX1500U

I am looking for a source for a cable to program a Standard GX1500U. I have already found the software. Thanks :)

Community email addresses: Post message: radio-programming@yahoogroups.com Subscribe: radio-programming-subscribe@yahoogroups.com Unsubscribe: radio-programming-unsubscribe@yahoogroups.com List owner: radio-programming-owner@yahoogroups.com Shortcut URL to this page: http://www.yahoogroups.com/community/radio-programming

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Reply | Messages in this Topic (1)

#16638 From: "Blake Bowers" <bbowers@...>
Date: Thu Jul 31, 2003 3:46 pm
Subject: Re: [radio-prog@yhgrps] Motorola RSS Programming Question bbowers311
Offline
Send Email

Serial port, not printer.


----- Original Message -----
From: "rodrigr2000" <rodrigr@...>
To: <radio-programming@yahoogroups.com>
Sent: Thursday, July 31, 2003 8:51 AM
Subject: [radio-prog@yhgrps] Motorola RSS Programming Question


> I am trying to program some of our department's Motorola HT1000's.
> I have a RIB that I purchased from Polaris Industries (PA-II) and
> the HT1000 programming cable from Motorola. I am using RS03.02.01 as
> my Radio RSS however, everytime I try to read the radio it says that
> there was a communication failure. In checking the BATLABS
> schematics they stated for Polaris RIB's to use the 25pin LPT1 port
> for connecting the RIB to the computer, however, there is no LPT1
> option under ports in the RSS. Is there something I'm missing here
> to make this all work? Is there possibly a newer RSS out there? Any
> help would be most appreciated.
>
> OST Rodriguez
> SU Department of Public Safety
>
>
>
> Community email addresses:
>   Post message: radio-programming@yahoogroups.com
>   Subscribe:    radio-programming-subscribe@yahoogroups.com
>   Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
>   List owner:   radio-programming-owner@yahoogroups.com
>
> Shortcut URL to this page:
>   http://www.yahoogroups.com/community/radio-programming
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Reply | Messages in this Topic (2)

#16637 From: boykinr@...
Date: Thu Jul 31, 2003 11:27 am
Subject: HT1250 PROGRAMMING kd4ajj
Offline
Send Email

In programming 12 used Motorola, HT1250 UHF portables; I have found 3 where the ZONE function will not work when programmed on any of the buttons. You can change ZONE from the MENU OK. All other functions programmed on the buttons work OK. Any ideas?

Boykin Roseborough
boykinr@...

Happiness is a journey, not a destination!

Reply | Messages in this Topic (2)

#16636 From: "Jason Rasmussen" <jmrasmussen@...>
Date: Thu Jul 31, 2003 3:22 pm
Subject: Re: [radio-prog@yhgrps] Motorola Spectra not receiving kb9kst
Online Now
Send Email

I have to agree. Sounds like it is programmed for secure and they just yanked the board.

Jason

----- Original Message -----

From: T Paulick

To: radio-programming@yahoogroups.com

Sent: Thursday, July 31, 2003 12:41 AM

Subject: Re: [radio-prog@yhgrps] Motorola Spectra not receiving

all things point to programming of the radio - on the "other" screen (F2, F9) it is programmed for internal securenet and the hardware has been removed from the radio without the radio being re-programmed to tell it the audio path has changed.

good luck

tjp

----- Original Message -----

From: Jeremy Rich

To: radio-programming@yahoogroups.com

Sent: Thursday, July 31, 2003 1:23 AM

Subject: Re: [radio-prog@yhgrps] Motorola Spectra not receiving

I purchased the radio used. It is VHF high band. 110 watts, secure capable. it has a A4 head. The static sounds kind of like the noise you get on a sound system when you turn the volume WAY up and nothing's playing through it. --- In radio-programming@yahoogroups.com, joey Drummond <barcode770@y...> wrote: > did you buy the radio new or used? What band (Lo Band, VHF, UHF, 800, 900MHz)? Hi or Lo power? Does it have a sys9000 head or the regular head? > > Does the "static" a carrier signal or static like the squelch is turned down? > > The Mon button if held down will give you a squelch adjustment screen. Try this and see if it works. A good setting is around 7. > > Jeremy Rich <jeremyr264@m...> wrote: > Hi all, just got my motorola spectra programmed and installed... it > transmits fine, hits repeaters and everthing, but doesn't recieve. > The busy light flashes all the time and if you turn the volume up, > it is like you get static. it does this on the internal speaker and > on the external speaker. any help is greatly appreciated. > > -Jeremy > > > Yahoo! Groups SponsorADVERTISEMENT > > Community email addresses: >   Post message: radio-programming@yahoogroups.com >   Subscribe:    radio-programming-subscribe@yahoogroups.com >   Unsubscribe: radio-programming-unsubscribe@yahoogroups.com >   List owner:   radio-programming-owner@yahoogroups.com > > Shortcut URL to this page: >   http://www.yahoogroups.com/community/radio-programming > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. > > > > --------------------------------- > Do you Yahoo!? > Yahoo! SiteBuilder - Free, easy-to-use web site design software

Community email addresses: Post message: radio-programming@yahoogroups.com Subscribe:    radio-programming-subscribe@yahoogroups.com Unsubscribe: radio-programming-unsubscribe@yahoogroups.com List owner:   radio-programming-owner@yahoogroups.com Shortcut URL to this page: http://www.yahoogroups.com/community/radio-programming

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Community email addresses: Post message: radio-programming@yahoogroups.com Subscribe:    radio-programming-subscribe@yahoogroups.com Unsubscribe: radio-programming-unsubscribe@yahoogroups.com List owner:   radio-programming-owner@yahoogroups.com Shortcut URL to this page: http://www.yahoogroups.com/community/radio-programming

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Reply | Messages in this Topic (7)

#16635 From: "zack gilks" <zbgilks@...>
Date: Thu Jul 31, 2003 2:15 pm
Subject: Re: [radio-prog@yhgrps] Motorola RSS Programming Question beadyorb
Offline
Send Email

when using the polaris unit go into your rss set up and change the comm port .

if your on the right com port the red LED will flash as data is being transfered.

I also have the same unit and the problem was my com port setting .

If you would like you can call me @ 403-363-8082

Zack

I am trying to program some of our department's Motorola HT1000's.

I have a RIB that I purchased from Polaris Industries (PA-II) and

the HT1000 programming cable from Motorola. I am using RS03.02.01 as

my Radio RSS however, everytime I try to read the radio it says that

there was a communication failure. In checking the BATLABS

schematics they stated for Polaris RIB's to use the 25pin LPT1 port

for connecting the RIB to the computer, however, there is no LPT1

option under ports in the RSS. Is there something I'm missing here

to make this all work? Is there possibly a newer RSS out there? Any

help would be most appreciated.

OST Rodriguez

SU Department of Public Safety

The new MSN 8: smart spam protection and 2 months FREE*

Reply | Messages in this Topic (2)

#16634 From: "rodrigr2000" <rodrigr@...>
Date: Thu Jul 31, 2003 1:51 pm
Subject: Motorola RSS Programming Question rodrigr2000
Offline
Send Email

I am trying to program some of our department's Motorola HT1000's.
I have a RIB that I purchased from Polaris Industries (PA-II) and
the HT1000 programming cable from Motorola. I am using RS03.02.01 as
my Radio RSS however, everytime I try to read the radio it says that
there was a communication failure. In checking the BATLABS
schematics they stated for Polaris RIB's to use the 25pin LPT1 port
for connecting the RIB to the computer, however, there is no LPT1
option under ports in the RSS. Is there something I'm missing here
to make this all work? Is there possibly a newer RSS out there? Any
help would be most appreciated.

OST Rodriguez
SU Department of Public Safety

Reply | Messages in this Topic (1)

#16633 From: "Geoffrey Bowman" <bowman@...>
Date: Thu Jul 31, 2003 9:28 am
Subject: Fw: Reprograming ex ambulance gp300 geoffrey_bowman
Offline
Send Email

----- Original Message -----

From: Geoffrey Bowman

To: radio-programming@yahoogroups.com

Sent: Thursday, July 31, 2003 9:33 AM

Subject: Reprograming ex ambulance gp300

Hi,

Can anyone tell me where I can get hold of the software for A GP300 the uses 5 tone selcall. I believe this is a different software program then for none selcall radios. Any answer in vocabulary of a 'Beano' reader please as I am a complete novice.

Answers to bowman@...

Reply | Messages in this Topic (1)

#16632 From: Lucas Duck <lucas_duck@...>
Date: Wed Jul 30, 2003 3:58 pm
Subject: Pager Terminal lucas_duck_2003
Offline
Send Email

Anyone knows how can be programmed a Paging Terminal NEC ED-510-A.

Indeed any info will be great.

Thanks in advance.

Lucas

Ps.: Where can be found info abt Advisor, Memo and Scriptor pagers (cables,
soft, etc)?

Reply | Messages in this Topic (3)

#16631 From: Lucas Duck <lucas_duck@...>
Date: Wed Jul 30, 2003 3:53 pm
Subject: Re: [radio-prog@yhgrps] gp88 software please lucas_duck_2003
Offline
Send Email

What about GP88 software?

Need info?  Need soft?

At 29/07/2003 - 23:59, you wrote:



>
>Community email addresses:
>   Post message: radio-programming@yahoogroups.com
>   Subscribe:    radio-programming-subscribe@yahoogroups.com
>   Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
>   List owner:   radio-programming-owner@yahoogroups.com
>
>Shortcut URL to this page:
>   http://www.yahoogroups.com/community/radio-programming
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Reply | Messages in this Topic (2)

#16630 From: "T Paulick" <tpaulick@...>
Date: Thu Jul 31, 2003 5:41 am
Subject: Re: [radio-prog@yhgrps] Motorola Spectra not receiving tpaulick2002
Offline
Send Email

all things point to programming of the radio - on the "other" screen (F2, F9) it is programmed for internal securenet and the hardware has been removed from the radio without the radio being re-programmed to tell it the audio path has changed.

good luck

tjp

----- Original Message -----

From: Jeremy Rich

To: radio-programming@yahoogroups.com

Sent: Thursday, July 31, 2003 1:23 AM

Subject: Re: [radio-prog@yhgrps] Motorola Spectra not receiving

I purchased the radio used. It is VHF high band. 110 watts, secure capable. it has a A4 head. The static sounds kind of like the noise you get on a sound system when you turn the volume WAY up and nothing's playing through it. --- In radio-programming@yahoogroups.com, joey Drummond <barcode770@y...> wrote: > did you buy the radio new or used? What band (Lo Band, VHF, UHF, 800, 900MHz)? Hi or Lo power? Does it have a sys9000 head or the regular head? > > Does the "static" a carrier signal or static like the squelch is turned down? > > The Mon button if held down will give you a squelch adjustment screen. Try this and see if it works. A good setting is around 7. > > Jeremy Rich <jeremyr264@m...> wrote: > Hi all, just got my motorola spectra programmed and installed... it > transmits fine, hits repeaters and everthing, but doesn't recieve. > The busy light flashes all the time and if you turn the volume up, > it is like you get static. it does this on the internal speaker and > on the external speaker. any help is greatly appreciated. > > -Jeremy > > > Yahoo! Groups SponsorADVERTISEMENT > > Community email addresses: > Post message: radio-programming@yahoogroups.com > Subscribe: radio-programming-subscribe@yahoogroups.com > Unsubscribe: radio-programming-unsubscribe@yahoogroups.com > List owner: radio-programming-owner@yahoogroups.com > > Shortcut URL to this page: > http://www.yahoogroups.com/community/radio-programming > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. > > > > --------------------------------- > Do you Yahoo!? > Yahoo! SiteBuilder - Free, easy-to-use web site design software

Community email addresses: Post message: radio-programming@yahoogroups.com Subscribe: radio-programming-subscribe@yahoogroups.com Unsubscribe: radio-programming-unsubscribe@yahoogroups.com List owner: radio-programming-owner@yahoogroups.com Shortcut URL to this page: http://www.yahoogroups.com/community/radio-programming

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Reply | Messages in this Topic (7)

#16629 From: "Jeremy Rich" <jeremyr264@...>
Date: Thu Jul 31, 2003 5:23 am
Subject: Re: [radio-prog@yhgrps] Motorola Spectra not receiving alucky8ball
Offline
Send Email

I purchased the radio used.  It is VHF high band.  110 watts, secure
capable.  it has a A4 head.  The static sounds kind of like the
noise you get on a sound system when you turn the volume WAY up and
nothing's playing through it.

--- In radio-programming@yahoogroups.com, joey Drummond
<barcode770@y...> wrote:
> did you buy the radio new or used? What band (Lo Band, VHF, UHF,
800, 900MHz)? Hi or Lo power?  Does it have a sys9000 head or the
regular head?
>
> Does the "static" a carrier signal or static like the squelch is
turned down?
>
> The Mon button if held down will give you a squelch adjustment
screen. Try this and see if it works. A good setting is around 7.
>
> Jeremy Rich <jeremyr264@m...> wrote:
> Hi all, just got my motorola spectra programmed and installed...
it
> transmits fine, hits repeaters and everthing, but doesn't
recieve.
> The busy light flashes all the time and if you turn the volume up,
> it is like you get static.  it does this on the internal speaker
and
> on the external speaker.  any help is greatly appreciated.
>
> -Jeremy
>
>
> Yahoo! Groups SponsorADVERTISEMENT
>
> Community email addresses:
>   Post message: radio-programming@yahoogroups.com
>   Subscribe:    radio-programming-subscribe@yahoogroups.com
>   Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
>   List owner:   radio-programming-owner@yahoogroups.com
>
> Shortcut URL to this page:
>   http://www.yahoogroups.com/community/radio-programming
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software

Reply | Messages in this Topic (4)

#16628 From: scott w <scottyfire@...>
Date: Thu Jul 31, 2003 5:22 am
Subject: Re: [radio-prog@yhgrps] HT1000 scan list ScottyFire
Offline
Send Email

Hello All,

Can someone offer some simple steps to create a scan
list for the HT1000?  I remembered at one point, but
haven't done it in a while, and need some refreshing.

Thanks,


=====

Scott Wentworth
Belleville Fire Department
NJ Metro Fire Photographers Assn
OnScene HotShots


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com

Reply | Messages in this Topic (4)

#16627 From: joey Drummond <barcode770@...>
Date: Thu Jul 31, 2003 5:01 am
Subject: Re: [radio-prog@yhgrps] HT1000 PTT ID Sound (noise) barcode770
Offline
Send Email

You can also disable the PTT ID noise per channel in the rss.

bmatt0779 <bmatt0779@...> wrote:

is there any way to change the noise that the ht1000 makes when the PTT ID is enabled or is it just a standard noise.

Community email addresses: Post message: radio-programming@yahoogroups.com Subscribe: radio-programming-subscribe@yahoogroups.com Unsubscribe: radio-programming-unsubscribe@yahoogroups.com List owner: radio-programming-owner@yahoogroups.com Shortcut URL to this page: http://www.yahoogroups.com/community/radio-programming

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software

Reply | Messages in this Topic (7)

#16626 From: joey Drummond <barcode770@...>
Date: Thu Jul 31, 2003 4:53 am
Subject: Re: [radio-prog@yhgrps] Motorola Spectra not receiving barcode770
Offline
Send Email

did you buy the radio new or used? What band (Lo Band, VHF, UHF, 800, 900MHz)? Hi or Lo power? Does it have a sys9000 head or the regular head?

Does the "static" a carrier signal or static like the squelch is turned down?

The Mon button if held down will give you a squelch adjustment screen. Try this and see if it works. A good setting is around 7.

Jeremy Rich <jeremyr264@...> wrote:

Hi all, just got my motorola spectra programmed and installed... it transmits fine, hits repeaters and everthing, but doesn't recieve. The busy light flashes all the time and if you turn the volume up, it is like you get static. it does this on the internal speaker and on the external speaker. any help is greatly appreciated. -Jeremy

Community email addresses: Post message: radio-programming@yahoogroups.com Subscribe: radio-programming-subscribe@yahoogroups.com Unsubscribe: radio-programming-unsubscribe@yahoogroups.com List owner: radio-programming-owner@yahoogroups.com Shortcut URL to this page: http://www.yahoogroups.com/community/radio-programming

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software

Reply | Messages in this Topic (4)

#16625 From: "K.Paul Boggs" <ab6wu@...>
Date: Thu Jul 31, 2003 4:12 am
Subject: Maxon 210+3 nightingale9...
Offline
Send Email

Need channel 9 & 10 reprogramed

Have 4 units. Who can do this for me ?

Paul

K.Paul Boggs

ab6wu@...

RACES/Red Cross Communications

Reply | Messages in this Topic (3)

#16624 From: "Jeremy Rich" <jeremyr264@...>
Date: Thu Jul 31, 2003 4:03 am
Subject: Re: [radio-prog@yhgrps] Motorola Spectra not receiving alucky8ball
Offline
Send Email

Yes, all other tones are heard just fine, just receiving on the
frequncies is the problem, and static is allways in the background.

--- In radio-programming@yahoogroups.com, "Jason Rasmussen"
<jmrasmussen@m...> wrote:
> Do you hear any of the normal beeps and tones the radio produces
when changing volume, modes, error tones, etc?
>
> Jason
>   ----- Original Message -----
>   From: Jeremy Rich
>   To: radio-programming@yahoogroups.com
>   Sent: Wednesday, July 30, 2003 10:43 PM
>   Subject: Re: [radio-prog@yhgrps] Motorola Spectra not receiving
>
>
>   When i refer to an internal speaker, i mean inside the vehicle.
>   when i refer to a external speaker, i mean the one that connects
to
>   the siren, pa, and external radio.
>
>   --- In radio-programming@yahoogroups.com, "T Paulick"
>   <tpaulick@r...> wrote:
>   > what kind of spectra has an internal speaker????
>   >
>   > tjp
>   >
>   >   ----- Original Message -----
>   >   From: Jeremy Rich
>   >   To: radio-programming@yahoogroups.com
>   >   Sent: Wednesday, July 30, 2003 9:39 PM
>   >   Subject: [radio-prog@yhgrps] Motorola Spectra not receiving
>   >
>   >
>   >   Hi all, just got my motorola spectra programmed and
installed...
>   it
>   >   transmits fine, hits repeaters and everthing, but doesn't
>   recieve.
>   >   The busy light flashes all the time and if you turn the
volume
>   up,
>   >   it is like you get static.  it does this on the internal
speaker
>   and
>   >   on the external speaker.  any help is greatly appreciated.
>   >
>   >   -Jeremy
>
>
>         Yahoo! Groups Sponsor
>               ADVERTISEMENT
>
>
>
>
>   Community email addresses:
>     Post message: radio-programming@yahoogroups.com
>     Subscribe:    radio-programming-subscribe@yahoogroups.com
>     Unsubscribe:  radio-programming-unsubscribe@yahoogroups.com
>     List owner:   radio-programming-owner@yahoogroups.com
>
>   Shortcut URL to this page:
>     http://www.yahoogroups.com/community/radio-programming
>
>   Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.

Reply | Messages in this Topic (7)

Yahoo! Groups

Group Information

Yahoo! Groups Tips

Did you know...

Messages