Robert, Iıve had great luck with FTDI chip sets. Iım running them on XP SP3 and Vista 32. Donıt know about Vista 64 or XP 64, but as I recall, drivers are...
I am working with a couple counties that received grants to install weather stations on APRS. There are 32 weather stations are being stalled in 1 county and 8...
Tim N8DEU wrote... ... Yes, you can connect a GPS to the connector on the front of the radio (no waypoint output to it) and a WX station to the DE-9 connector...
Hello, Since I only have one computer running any version of Windows (the rest are on Linux or Mac OS X...) and that Windows-box doesn´t have a serial port I...
... Tim, I've got a T2-301 that is destined for a balloon tracker if you want to take a look at it. I ran it for a few days (KG4WSV-something, don't remember...
Now that I have several wx stations working at r/c plane sites I'm being asked about UTC to local time conversion. They would like to see the information...
Hi Glenn, If I am understanding your questions correctly... Yes, there are a number of ways to display local time in a 12/24 hour format. One that I use is: ...
... Hi Glen. Do you have any details or descriptions of equipment used for your WX stations at the R/C site? Do you have commercial power available, or are you...
... I am also working on a wx station for our RC site here in BC. I have had the data package at the site for several months now (kmasrc.ca)and just awaiting...
Hi Rob, The equipment I'm using at wa6mha-11 is an OT1m and an older AAG series3 -1 wire instrument on a 20 Amp solar panel with 8 car batteries for reserve...
Please see post #7684 Brian. Let me know if you need more info and please keep the group updated with your progress. Scott and others have some low power...
I am glad to hear you got one working as a digi and weather at the same time Larry. I have never tried it personally but several friends have been having...
I can't remember if I tried running it on the OT1+ - I was testing it on the Arduino radio shield board, and that firmware might actually work unmodified. It...
I should clarify as I didn't read the original post thoroughly. I have the Tracker2 into a separate radio working as wx and digi. I think the T2-135 is...
Larry WT9M wrote... ... That's correct. The T2-135 can act as a digi and have a WX station connected simultaneously. It can even have a WX station connected to...
If I have my OT1+ set up to output power on pin 4, should I disable this when connecting to my PC while running the configuration program? Just so I don't...
I have the Peet Brothers Ultimeter 100 and the OT1+. I have the otplus-peetbros.s19 loaded in the OT1+ and (I believe) setup correctly. I have the Ultimeter...
First things first - do you have the Peet Bros firmware loaded on the OT1+? Continuous flashing means it thinks the channel is busy, so check your squelch and...
I rigged up a cable with pins 2 and 3 switched and pin 5 going all the way through just as the manual said to - the OT1+ is being powered with a 9v battery...
I uploaded the KISS firmware into my OT+. Now I can't connect anymore using the configuration software. The software says to reset the tracker but that doesn't...
Were you using UI-View32 with it? Try rebooting. UI-View32 will leave the serial port stuck open if you don't have an 'exit KISS' sequence. Other programs...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
