I observed the same problem. It might be a CRC like used in SMACK -Kiss protokoll. I would also like to see it removed, since the OT1+ cannot be used in ...
and probably make some older version of OT1x firmware available also on the website. tnx ... From: Scott Miller To: opentracker@yahoogroups.com Sent: Sunday,...
I'm was looking to use the OT1Plus in KISS mode. When I went to the website to get the latest KISS mode firmware there is one file, "otplus-kiss.s19". I...
The normal one is 9600 baud. I'm working on getting something set up to automatically list all of the available firmware images on the website. Scott...
Thanks to Scott, many people email us for quotes on pre-made tracker cables. We have been working on streamlining the ordering process. Today, we added a...
Not sure if I have read some of the earlier posts correctly. Install a toggle switch between pin 4 and ground on plug X1, when the switch is open, would be on...
as there were some which had problems connecting the two modules together and I have a schematic proven to work I uploaded it to the files section. File name...
Hi all, Wanted to let you know that my AAG 1-Wire Wind Speed Direction module is a real RFI generator for me at least in my ham radio shack. Presently I am...
Are you sure it's the station itself and not the cabling? Might not hurt to try shielded cabling if you can. Normally I'd suggest a capacitor on the data...
For OT+. I'm especially looking for the one that was published on the support page before this present one. Can't unfortunately remember the build number....
Hello, For information, with transceiver Talco CS3 or CS4 and OT+ don't install the R7 and use HI position for the jumper audio level. Have a nice day Michel...
Looks like you guys beat me to it... I was going to look into building APRS Rx (aprsx) for broadcom-based routers this weekend. MW ... -- Mike Wren Albany, NY ...
Oh boy, why this posting got posted so late? I was shocked when I saw it an hour ago, I was thinking that there is a problem on my notebook, and is spewing old...
APRS4R is a free open software that runs on an embedded Linux device, like many cheap WiFi-Routers (Linksys or ASUS500gP). First you have to install OpenWRT on...
Paulus, This isn't your laptop, or the group management software going buggy. It's just that your message got flagged as potential spam by Yahoo Groups, and we...
... Hi Robert, ... I have the same QRM problem. I think the sound is the 1-wire digital signals that are received loudly on HF. Normally I switch off the ...
Jaakko, You certainly saved my sanity. My neighbors were getting a tad nervous I think with me going around the neighborhood with my SW portable radio RF...
You can try some series resistance in the data line, but only so much - the 1-wire devices get their power that way, and the ADC especially doesn't like to be...
Not that it really cures the problem of digital signals via wires but a shielded cable with twisted wires inside goes a long way. I will never understand why...
Robert, it may get a bit better if you use some of these clamp on ferrites on the supply cables close to the weather station....... Adding a low inductance...
I think it's for the sake of their iButton devices. You can package chips into metal cans like batteries (maybe using the same equipment) and get by with two...
Keri, thanks, for the explanation. Paulus - N5SNN ... ____________________________________________________________________________________ You rock. That's why...
... Nope, this is not a regular TNC, but a KISS (keep it simple stupid) TNC, hence you need to hook it up to a KISS capable software, i.e. UI-View de Paulus -...
Only if you speak KISS! You have to properly format an AX.25 frame to make it send anything. With the normal firmware, you can prefix a line with ! and it'll...
