The LED takes two pins, but yeah, it could be done. It'd be a trivial code change to do yourself - you just need to change the macros for the LEDs in the...
The quick answer is no, not on the OT1+. Not enough space for a command parser and the flash modification code. You CAN have it send a packet in response to...
I thought this was working, but apparently not. I'll get that in there soon. It was added to the Tracker2 code after the OT1+ forked from it, so the changes...
I've got weather-mode DCD on my list of things to check. I'm still 118 messages behind since I left for DCC, and I leave in one week for Hong Kong, so I'm...
... That's a good idea. I hadn't thought of making the change in software. After the ride that is something that I'll definitely have a look at doing for fun. ...
... Thanks. Glad I'm not going crazy trying to get it working! Dave. -- David Ingram (VK4TDI) Real email: dave at ingramtech dot com Brisbane, Queensland,...
... Hi Scott, ... on? ... Thanks for coming back to my post. I understand that you must be very busy with the Open Tracker project. I tried again last Sunday...
This is my first post on this forum as well as being new to Amateur Radio and APRS so please be a little forgiving if I sound a bit dumb. I have been trying to...
... Can you use the diagnostic screen to test that the transmit function is actually working right - i.e., you're keying the transmitter and getting audio. ......
W4RL recently described a problem very similar to the one I am having with the firmware that supports the 2100. I have not found an answer on the group, so...
Glenn VK1NUT wrote... ... The OT1+ should (glad I looked at the manual... I don't have an OT1+) rapidly flash green when channel is in use (receiving audio),...
Well, heck.. I don't know what was in that firmware file, but it wasn't the Peet Bros firmware. I've recompiled it (with some updates to reflect structural...
Scott, thanks for the quick response. I have these additional observations: The firmware now loads ok, and the weather configuration screen appears to allow...
Thanks Keith and Scott for the replies. Sorted the problem with your help guys,I am now running APRS mobile. It would appear that the Garmin 11 had lost power...
Hmm... no, I've never seen that before. Can you capture some of the data from the weather station and send it to me? Is it at 2400 baud? Or is it even...
The output stream from the 2100 is at 2400/8/N/1. The manual says that the serial port supports two baud rates, 2400 and 19200, and says that those are user...
... That is an excellent site as well, I have been using it for a number of years to mine through the data available. The aprs.he.fi site is a really good site...
... The known list of good sites: <http://info.aprs.net/index.php?title=InternetSystem> Backup up to just "info.aprs.net" and you'll find a lot more APRS info....
You ought to be able to get deviation that way (from the data port) if you've got a reference to calibrate it against. My trusty Agilent 8920A test set makes...
Scott, Now that I have an Agilent model number, I can start asking around work. I'm sure we have one somewhere. I might look into building a low cost deviation...
That's an older one (produced under both the HP and Agilent names, I think) but just about any service monitor should do it. To test the deviation off the...
I was trying to make my OT1+ work as a Kiss TNC with UI-View today with no success. I loaded the kiss.s19 firmware in and it looked like the regular firmware ....
The store's not going to close down completely, but I leave for a week in Hong Kong on the 9th. I'll try to leave as much stuff stocked and ready as I can for...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
