Gordon, A couple of us use this method and put Hoppes number 6 gun cleaner in the ultrasonic device. I will rinse the injectors in MEK afterwards before ...
Hi Greg, The tab should be bent to the right if you want left rudder deflection. You should probably check aileron and flap rigging before doing any bending....
Does anyone have a Nose Wheel Steering Torgue Tube #25 in the part catalog pg. 51 in airworthy condition that can be parted with? I also need the two oil...
Put on a QUICK change unit and it is much cleaner and easier. Oce ... From: "Rip" <rquinby@...> To: <navion_aircraft_mail@yahoogroups.com> Sent: Friday,...
OCE DOTSON
ociedot@...
Apr 1, 2006 11:21 pm
24799
Gordon, I believe this is the right answer: Many mechanics use Hoppes #9 Solvent (Gun Cleaning fluid). Greg ... From: "Gordon A Nesbitt II" ...
Rusty et al, Thank you. The rudder re-rigging (at least) was completed recently and faithfully to factory instructions and that's the reason why I now...
Lonnie, Get a NEW torque tube. Call Chuck at ANS or Tom Deluca. The new torque tube will have to be reamed with the proper taper pin reamer to match your ...
By Roger Friedman The small, motorized propeller is spinning quickly, its three blades blending into a single blur. But despite the smooth motion, there’s ...
In a message dated 4/2/2006 7:43:02 A.M. Eastern Standard Time, rustyher@... writes: Lonnie, Get a NEW torque tube. Call Chuck at ANS or Tom Deluca....
Jim, A "basket mount" is a classification of engine mount where the engine is supported front and back on engine mounts (usually 4 points). I suppose the...
Jim, The basket is the cowling that is under the engine. The Navions with the original engines were mounted to the cowling that goes under the engine. The...
Does anyone have a good suggestion for cleaning wheel wells for painting. I used a pressure cleaner with mineral spirits but still the nose wheel well is not...
Well, I thought I knew about all there was to know about why the left main gear wouldn't hook up in flight, but I was wrong.... Even though the right main and...
Hello Dave, I saw the pressure problems and wanted to see if you learned anything else. You flew up to St Marts airport last year adn bought some parts from...
Try gunk---napa---1-1 with kerosene. 4456k ... From: navion_aircraft_mail@yahoogroups.com [mailto:navion_aircraft_mail@yahoogroups.com] On Behalf Of n656c ...
Hi Lonnie, After the mineral spirit douche you'll need plastic and aluminum brushes and scrapers, scotchbrite pads, more mineral spirits, rubber gloves, maybe...
Lonnie, While attending flight school in the days of $5/hr for a C-150 and $40/hr for an Aero Commander 500 I paid for my hours in the duel roll of flight line...
Everyone that responded to my question I would like to thank you. I like the idea of letting someone else do it the best but as we all know when it comes to...
Dick B., Thanks for the reply. I am buying an E225 engine that includes the "basket". Does that mean I will get all of the lower fuselage structure and skins...
Hi all, Can anyone give me a guess (or actual cost) to the recurring costs of the 250hr Hartzell prop/hub inspections per AD 97-18-02. I am in the process of...
Jim, I would say yes, but call the individual and ask him what is included. Does it include the nose bowl, the 2 engine cowlings, and the bar that holds the 2...
If by "green stuff" you mean Simple Green, suggest you not use it on aluminum.Too caustic, unless they have come out with something recently that is ok for...
GryHeyer@...
Apr 4, 2006 12:05 am
24822
'Simple Green' came out with a degreaser just for aviation that is not caustic and odorless that's the perfect spray-on wipe-off cleaner for a head up in...
A 'New' Navion On The Way The first "zero-time" Navion to be built in 30 years is expected to be on the grounds at Sun 'n Fun today. According to an email from...
Jim, You should be able to get all of that in the back of the pickup, but the "Basket" ie. lower cowl and engine mount combintation is quite light and will...