Carl, I am currently using your v1.13 with Orion firmware 1.372. There seems to be a problem with interaction between the AGC and RF gain. When I operate the...
What you are seeing is normal for firmware 1.372. The RF gain serial command only moves the Orion RF gain internal value but does not change the AGC threshold...
Carl, OK. I had read the dox when I first received the revision. However, your description didn't specify just what kind of problem would occur by using the ...
Yes, you are correct. I am sure the next firmware version from TenTec will fix this. 73 and Happy New Year, Carl Moreschi N4PY Franklinton, NC ... From: "Joe...
Carl, If one were to map a POD Function button (F1...) to a scrolling setting such as keyer speed, volume, rf gain etc, it obviously works FB. You would...
Dear Carl: The improvement in Sweep sensitivity that I previously reported after a master reset was wrong. I am still experiencing the problem, and I believe...
I need some help: I must be missing something! I operated the rtty round up this past weekend, but not as I planned. I planned to use my Orion, Writelog(with...
Dave, In my N4PY program, set RTTY mode 1 for FSK. Also, turn on the check box that says, "Output RTTY Mode is RTTY Label". This will cause the output RTTY...
One other thing I forgot. You need to set the RTTY Mode 1 label also to "FSK". This will make the RTTY mode key in the program say "FSK". Carl Moreschi N4PY ...
Thanks Carl, I didn't work. I think I set everything as you said: Rtty Label (I guess this is mode 1) = FSK Rtty Label 2 = USB Writelog is LSB=FSK Your...
I recently re-read the paper by Scott Robbins W4PA regarding setting up the Orion for best weak signal work, and he describes setting the AGC decay to a level...
This sounds like an excellent suggestion. I will have to think about what happens to the decay value in the agc speed window. I am thinking I will just keep...
Carl if Gary ever gets around to adding the serial port control of the revised RF gain control parameters the RF slider becomes threshold control over part of...
For the February 1 version, I am making extensive changes to the RF gain control. It will be remembered from band to band and have a button where the RF label...
I've noticed that CW from the keyboard with my IC-756PROII using Icom 1.10 and XP is hanging. After a few characters the programs stops sending, and the...
Since upgrading to the latest version (v2.21), when I select a memory, the filter setting goes to 1200 . . . no matter what filter setting is saved in that...
Guys, I do not see that problem here at all. Fill me in on exactly what you are doing. Are you using the memory file system or the band buttons? If you are...
Dan, I just tested my K2 with v2.21 and it does not recall the saved filter settings from memory. I am not sure how prior versions reacted. Harry W8YMO ... ...
Where can I download the latest up grade? 73 de K6QGH Van ===== __________________________________ Do you Yahoo!? Meet the all-new My Yahoo! - Try it today! ...
And Here. Terry. Same here. Jim N4ULE ... No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.8.7 -...
Carl, It just does it here on the memory file. I have the filter set to 1.95 in the memory file . When I select a Freq. in memory it will change to that freq....
It appears that there is a growing lack of interest afoot here (and elsewhere) in the Peg. Fortunately, the Jupiter shares most of its design with the Peg, so...
Perhaps the current version of N4PY is simply doing a great job! This list is for all of the radios N4PY is implemented for, not just the TenTec Pegasus,...
OK, Carl. Frankly, I wasn't sure and hadn't looked at the schematic, so I hedged a little. However, on another front: I am currently using v1.14 with the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
