... Thanks but, my manual (dated 1 Dec '04) says nothing more than this about KISS: Supports up to 1500 bytes frames both for transmit and receive Command in...
Hi, KISS is 100% implemented, TXDELAY is implemented, Persistence is implemented, and as far I know, there was no problem reported to it. If you have more...
Is there any body using a tnc Utnt3.1gps with a Icom v8000? if so I wold like to know how to make the cables, because I run out of ideas and also burned the...
Hello everybody, I have 2x mini USB uTNT V3.0 STD. I use AGW + UI-View with 2 ports for a digipeater. I didn't found any solution on this FAQ this is the...
OK, if you have technical manual please send me, if not please wait one day, I will check and send you more detailed instructions. Kind Regards ... OpenStick...
Hi, I sent you some instruction to your e-mail. If you still have a problem, please send me you phone number, it is the fastest way to support you. We will...
I'd like to interface a TNT v3.0 with internal GPS to a radio using: * 2.5mm mono socket for the microphone (and PTT?). * 3.5mm mono socket for the speaker. ...
I am at my ropes end....I consider myself to be an idiot....I am an idiot with 20 plus years in the electronics/communications industry.... I am an idioit with...
I may have fixed this: * Connected the PTT-line to the 2.5mm tip with a 2.2k ohm resistor. * Connected the Transmit Audio-line also to the 2.5mm tip with a 0.1...
Ok...maybe a simple question........ I have tried to download the utnt+ software from this fowum....I get some kind of hex file that windows cant open..... I...
Thank you. I found the Maintenance Utility on the Yahoo site. It would be helpful if that and the manual could be added to the elcomresearch.com web site, so...
Has anyone else experienced this problem, the cables received to connect my external GPS and Transciever to the TNT unit are incorrectly wired.Hope this has...
 People it takes time to the research dep. to have an explanation ,and also looks like the are in Athens, are under civil pressure. Im holding my breath for...
a bit of progress in this nightmare..... after help from a member of this site I finally got the firmware and console working....I hope.... made some progress...
... old uTNT, ... Monday, I ... Hi, Wondering if you made any progress on this? I still can't get the KISS ON to stick. Maybe I should just turn the battery...
Hi, Wondering if you got anywhere with PERM on the uTNT+? Mine still doesn't work, and I'm having a hard time getting the TNC into KISS mode unattended......
I assume txvolume is still not implemented? I get eh? everytime I try to set it. My unit is currently unusable due to the low volume level. When listening on a...
Hi, Yes in the current version, VOL is still not implemented. However, it has been set internal to the high level, so low level is rather no possible. However...
Hi Chris, It was not possible for me to setup workbench for the old version of uTNT in order to regenerate your problem. I will try to do during next days....
Dear Sir, You are using uTNT Plus, where you can increase or decrease TX level using VOL signal. Please try as maximum value 200, and then try to decrease...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
