Greetings! Now that I have all the buttons on my Evo 9 working, I started to program it. I've been going through the Joedy Drulia tutorial and hit on a snag....
Bill, You may want to think about resetting the transmitter to "as shipped status" . This is done by using the Multiplex ROYALevo Datamanager. Fred ... From:...
... Bingo!! OK, I found the Datamanager, downloaded and installed it, printed off the info sheet, found my Multiplex cable and..... I'm wondering when I last...
Bill, Get a 9 to 25 pin serial adapter. This is what I did. Fred ... From: mpxradios@yahoogroups.com [mailto:mpxradios@yahoogroups.com]On Behalf Of Bill Johns ...
As a new forum member can I say hello. I recently bought a cockpit sx and initially find it easy to program all my fixed wing requirements in the first few...
Hi Nick Glad you like the Cockpit SX. You can disable the flight modes - I have done just that with an ARK X400 heli. I set the collective and throttle curves...
Just to say that I'm slowly adding some support pages for the Cockpit SX to the Multiplex Clinic site. There are currently sections on: - description - preview...
I spoke to Steve at Hitec/Multiplex. He said they're "trying to decide whether or not to import it". They did not have success with the Cockpit and Evo 7 here,...
Or as I somewhat cynically posted to rcgroups, they don't want any competition for their much hyped new hitec "vaporware" 9 channel TX. Seems like it will...
My brother has an evo 9 and as said i have a cockpit sx. I don't see much need for an evo7, but someone may tell me different. As for removing your post? They...
I have to agree that is a strong possibility. HiTec USA have certainly set a precedent with rebadging a modified RX-7 DS IPD as the Fusion 9. And as a...
Is it really possible to buy from Japanese auctions? www.japanauctioncenter.com <../../../../UltimateFleaMarket/www.japanauctioncenter.com> Through this...
Do you have any pic of the tray? Are you willing to sell the tray, module and receivers (I have a MPX4000 already) only? In addition, I am located in hong...
I aleays buy my MPX stuff at Hobbyhorse == > www.hobbyhorse.com , they are located in Madison, WI 53704 . They do carry MPX crystals, both rx and tx Michael...
I wanted to use a JR RS77S synthesized reciever with my 4000 and wandering if it is compatible with my radio. The reciever says its a "PLL-synthesized SPCM ...
I’m not sure that SPCM is the same as PCM I think it may be JR specific. Your best option is to contact David Leigh the Multiplex repairer for Australia....
Thanks for the info, I had a feeling it would not work, I think PCM mode is Multiplex specific. I'll give David a call. Cheers Mike ... be able to tell you...
No, it is more that SPCM is JR specific. PCM is used by a lot of radio manufacturers. _____ From: aniky007 [mailto:aniky007@...] Sent: Thursday, August...
I have used a synthesized JR receiver (7200) with my Multiplex 3300 with no problems, and have range tested the JR receiver with a synthesized Multiplex module...
Synthesised or not is not the issue. The issue is SPCM vs PCM. The 303 does not even support PCM so you could not use an JR RS77S Rx with it anyway. The...
PCM is brand specific. One manufacturers PCM is not compatible with any other manufacturers PCM. JR SPCM appears to stand for Synthesized PCM. Fred ... From:...
... It's worse than that. PCM radios are not always compatible within a manufacturer. Some early PCM s are not compatible with later PCMs from the same...
JR has SPCM and ZPCM. The ZPCM is the older pcm which is 512 pulse. And the SPCM is the new one 1024 Pulse . You can also look at this link from Futaba . You...
I'm new to the groups so excuse the newbe questions. I'm also new to multiplex, but since using the EVO 12 I've sold all my other radios and I'm using the EVO...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
