Hello everybody. I need to replace the potentiometers of the sticks of my MC 3010. The potentiometers are 5Kohms one with a 3 mm shaft, 17 mm body and only 7...
Hi Guys, Last week when setting up my Yak 54 elevator I noticed that my trim was changing slightly when the dual rates switch was actuated. Has anyone else...
Has anyone successfully used a MPX 3030 Tx with the CRRC simulator? I have a USB cord that connects the TX to the computer but the program doesnt accept the...
I use a 3030 with CRRC sim, but I made up one of the audio tx cables as detailed on the CRRC sim wiki site. Cost me less than Ł5 and works great Bill Scott ...
Hi Bob, You were 100% right! I fixed my issue last night. The gimble pots are secured with one screw that clamps it in place. It was simply a matter of...
Raschow, I didn’t measure the coax but in just looking at it there should not be a problem. I only have six or so flights on the system and so far zero ...
Multiplex has discontinued all the OLD versions of the 4000, the 35 and 40 MHz Synth versions are still available. Apparently this was a rumour started in a...
Shame. But as long as there is factory support, IMO it's not such a big deal. More worrying is MPX's long term prospects. With no native 2.4 GHz sets, and ...
In a message dated 10/23/2007 5:50:21 P.M. Eastern Daylight Time, tbrannon@... writes: I didn’t measure the coax but in just looking at it there should...
It is going into a 1.20 powered Sukhoi SU-26 next. Eight servos, 72 inch span. Will keep everyone up to date . Travis ... From: mpxradios@yahoogroups.com...
... And unconfirmed by Multiplex Germany. The 35MHz Synth version of the 4000 is available from Multiplex in any quantities. It is possible that the 40MHz is...
Jao, there is no such thing as a synth version of the 4000, or 35Mhz and 40Mhz version of the 4000. Synth and 35 or 40Mhz is the RF module, not the 4000...
... and 40Mhz version of the 4000. Synth and 35 or 40Mhz is the RF module, not the 4000 itself. Is it the RF modules that you are talking about? ... Harry ...
MPX will continue to support owners of the 4K: "For servicing we always plan spares for 7 years after the production is stopped. So you need not to worry about...
I've just received confirmation from MPX in Germany that production of the 4000 has ceased, due to the non-availability of certain key components. No mention...
Shame. It seems like I'll have to bring my plans forward to purchase one before they disappear out of the supply chain. Unless the replacement is going to be...
I have been following this sometimes and as an owner of the 4000, I am amazed at a decision of the company (Hitec) to discontinue this radio... Instead of...
Roger ... Shortage of key components is the information I had from Norbert, and I guess they also have to allow for future demand for spares. The 4K must be a...
The story I heard quite some time ago was that the microprocessor that they used is no longer in production and when they ran out, they were stuck. Seems any...
Hi All, I work in electronics manufacturing and obsolecence is a big issue. You can still get most parts but now it's very risky buying parts on the grey...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
