Greetings for 2011, To improve the engine access we removed the original monel tank from our 1968 M34. It has no leaks and only mild surface corrosion on the...
Hi, Paula! That tank sounds like the exact same type that's in the 1972 M30 we bought last fall. I don't *think* I have an urgent need for a replacement....
if you still have the tank....I would like to have it I'm here in Fl and can pick it up Frank ... From: Paula Biles <PBEE@...> Subject: [morganowners]...
How many gallons does this tank hold Many thanks Steven From: morganowners@yahoogroups.com [mailto:morganowners@yahoogroups.com] On Behalf Of frank deshaw ...
Hi All, Thanks to all who responded. The tank will be going to a new home here in Florida. It's always a pleasure to pass along something like this to someone...
7752
bcorb80630@...
Jan 8, 2011 12:12 am
To one and all, we have decided to sell our 198 Morgan 22 hull number 69. I would appreciate some sort of value of this boat. Trailer new 2007, roller furling...
Hi Brad, As the owner of a M22, I tend to watch them when they pop up on Ebay and elsewhere. They typically go for between 1000 and 2000 with trailer, your...
I re-powered my 28' with a Yanmar 2gm20f and loved it!! She  is able to make hull speed at about 2800 rpms. Fuel burn = 1/2 gph. At WOT it will bury the...
Did you have to raise the engine cover area in the cabin? I recall the Yanmar being a good bit taller than the Palmer. Rich ... Did you have to raise the...
Yes, I built a nice trap door kind of hatch to accmodate the heat exchgr. I may have some pics. I'll post a few if anyone wants to see. Â Steve ... From:...
I for one would love to see any pictures that you have of your 28. I just bought an OI 28 a couple of months ago and I’m trying to learn everything I can...
When I investigated repowering, I found a (14bhp?) Beta engine that I thought was low enough to fit in the engine compartment without modification, but I never...
That reminds me, I did have to modify the stringers. (read cut out with a sawzall) The Yanmar is much narrower than the Palmer I pulled out. There was no...
If you go to Sound Thinkin's photo album,(note the numbers are the order of them in my computer) look at #3 showing the galley and quarter berth. Behind the...
Hello all, I've finally sold my other boat and have begun restoring "Cygne", my 1967 M24. When I removed the old (flat stainless) genoa tracks, the starboard...
During the refit on "Linda Jean" I installed T-Track for both the Genoa track and added a 5' jib track to replace the fairlead near the chain plates. Both of...
Nice trailer Bob and would you have any ideas on trailering a 33 ft Morgan??? I am refit mine this winterand need to have her hauled across land. May want to...
I have no experience with trailering that large of a boat, although I saw one getting packaged for the road at the Pensacola Shipyard Marina a few years back....
I think Bob is right, both about using a pro and worrying about the permits. Your boat is too heavy for you to haul unless you've got something larger than a...
I don't know if the 24 has the teak toerail that the 28 and 30 and 34 do, through which the original sheet block track is bolted. On my 28, because I'd gone...
Hi Karl. The 24 also has the teak toerails and I'm replacing mine. When I removed the old ones (in pieces) I found hull to deck machine screws and between...
... Something that wasn't so easy for me, because I wanted long track, and because I'd never done it before, was this idea - If you want 8' of track,...
Good idea, thanks Karl. ... From: Karl Burton <kburton@...> Subject: Re: [morganowners] Re: Genoa track on M24 To: morganowners@yahoogroups.com Date:...
I am looking for a complete set of offset meaurements or plans for the Morgan 40 aft cockpit ketch. I also need stability numbers. It has been suggested that...
I don't know how current this information is but I am told that this is a possible source for Morgan plans and manuals (From the Chesapeake Morgan Owners...
