Hey everybody! I know this is a bit off topic, so plese forgive me in advance, but we need some help. I've started a new group for lathe afficionados (like we...
The tailstock on my Clarke CL300M needs to be lowered but I can find no obvious way of doing this. I can adjust it front to back (but that seems to be ok as it...
Assuming it is only a couple of thou out of alignment, the best way to fix it might be to align the headstock instead - you may want to do this anyway if the...
OK, a couple of things to check still, first are the taper sockets for your centers in good nick? Are the centers themselves in good nick? Ok they were the...
Have you tested for a possible twist in the bed? This can make the tailstock appear to be high. Assuming its the origonal unit they were ususlly drilled from...
Having to LOWER the tailstock is a blessing compared to having to raise it. The mating surface of the tailstock to the bed needs to be addressed in most of...
I have been considering using tapered shims to adjust elevation of my tailstock. Has anyone heard of doing this? Jim RabidWolf <aardvark@...> wrote: ...
It is generally accepted that tailstock rams on new lathes will be from .005 to .015 high. Even the one on my 50 year old South Bend is about .010 high and it...
Hi all. Jerry here, normally in Alaska. I have a G4000 9x19 & have performed the HS adjustment a couple of times. I can tell you that on my lathe, it is not...
Jerry, I read your writeup. Good job. I had a bad experience trying to use Rolle's dad's method a couple of years ago. I was setting up my new 13x40 and a...
Hey all, am travelling up to Seattle and wondering if there are any good shops for the garage machinist. I'm especially looking to pick up a Smithy. Thanks! ...
Heck if I know, Mark. I tried to find it also & failed. I have a link on my 'puter that works. Here is my link. http://groups.yahoo.com/group/9x20Lathe2/ Try...
Hi Thomas, ... You might want to ask on the seattle_metalheads group. http://groups.yahoo.com/group/seattle_metalheads/ -- Dave Hylands Vancouver, BC, Canada ...
Thomas; I just made a trip to Grizzly in Bellingham WA. They have a very nice store and warehouse there. They are only open Mon to Fri. I picked up there 11x26...
Thanks for all your advice. It seems there is far more to look into before tackling the tailstock. I will start by checking everything I can and satisfy myself...
Jerry, Thanks! I managed to stumble across it, and have subscribed to the group. Haven't had a chance to peek at your guide yet, but I'm looking forward to...
I stand corrected! ... From: Mike Haaland To: mlathemods@yahoogroups.com Sent: Wednesday, August 10, 2005 9:50 PM Subject: RE: [mlathemods] Lathe ... You mean...
Fortunately we call them "auction sales" over here, so that we are right either way .... <VBG> Tony Wells. ... From: ernie To: mlathemods@yahoogroups.com Sent:...
... Most of the newsgroups I read, mark them with FA: at the beginning. Since there is no set 'sale' price, it makes sense to have a distinction. FS: = Hey, I...
I posted some modifications I made to, of all things, the chip pan. See "Jim E.'s Photos > Chip Pan Mods" in the Photos section. When I first mounted my 7x, I...
My choice would be an industrial grey (like on my atlas craftsman lathe). Wonder if the heat from powder coat baking could affect (warp) the castings?...
I am considering somethin radical, like MACHINE gray <G> The red on these things is slowly driving me mad... I remember seeing a picture in one of the "files"...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
