midatlanticretro : Messages : 3284-3313 of 30835

#3284

From: "macmothership" <macmothership@...>
Date: Mon May 8, 2006 11:04 am
Subject: VCF Set-up & Tear Down Hours

Evan,
Could you post the set-up hours on Friday and also Saturday morning, as well as
tear-down
hours after the show? Sorry if this has been already posted - I can't recall!

Reply | Messages in this Topic (2)

#3285

From: Jeremy Moskowitz <jeremym200@...>
Date: Mon May 8, 2006 1:00 pm
Subject: VCF East Address

jeremym200

Send Email

After 120 seconds of searching,
I could not find the exact
street address of InfoAge in Wall
on either the VCF site or the InfoAge
site.

Can someone please post the Mapquest-able
street address?

Thanks in advance.

Reply | Messages in this Topic (11)

#3286

From: Joe Giliberti <starbase89@...>
Date: Mon May 8, 2006 1:35 pm
Subject: Re: VCF East Address

jtkirk1337

Send Email

Jeremy Moskowitz wrote:

> After 120 seconds of searching,
> I could not find the exact
> street address of InfoAge in Wall
> on either the VCF site or the InfoAge
> site.
>
> Can someone please post the Mapquest-able
> street address?
>
> Thanks in advance.
>
>
2201 Marconi Rd.
Wall, NJ

Reply | Messages in this Topic (11)

#3287

From: Bryan Pope <bryan.pope@...>
Date: Mon May 8, 2006 1:20 pm
Subject: Re: VCF East Address

b_ster42

Send Email

Jeremy Moskowitz wrote:

After 120 seconds of searching,
I could not find the exact
street address of InfoAge in Wall
on either the VCF site or the InfoAge
site.

Can someone please post the Mapquest-able
street address?

Thanks in advance.

2201 Marconi Rd
Wall Township, NJ 07719-4081, US

Cheers,

Bryan

Reply | Messages in this Topic (11)

#3288

From: "ysgdhio" <ysgdhio@...>
Date: Mon May 8, 2006 3:22 pm
Subject: Re: VCF East Address

ysgdhio

Send Email

--- Jeremy Moskowitz wrote:
> After 120 seconds of searching, I could not find the exact
> street address of InfoAge in Wall on either the VCF site

http://www.vintage.org/2006/east/directions.php

> or the InfoAge site.

http://infoage.org/
Center column, not too far below the VCFE announcement.
Or just click "Visiting" on the nav bar.

Didn't take anywhere near your 2 minutes.

> Can someone please post the Mapquest-able street address?

Google Maps is your friend:
http://maps.google.com/maps?f=q&hl=en&q=2201+marconi+rd+07719&om=1
(Click "Hybrid" and you'll actually see the site).

Cheers,
Andy

Reply | Messages in this Topic (11)

#3289

From: "Evan Koblentz" <evan@...>
Date: Mon May 8, 2006 3:44 pm
Subject: RE: VCF East Address

evan947

Send Email

2201 Marconi Road, Wall, NJ, 07719.

On some GPS systems it's listed at Belmar instead of Wall. (Belmar is a place name.)

Mapquest: http://tinyurl.com/zys47

Google Maps: http://tinyurl.com/hk8mn

A week or two ago we posted the long./lat. information here.

From: Jeremy Moskowitz [mailto:jeremym200@...]
Sent: Monday, May 08, 2006 9:00 AM
To: midatlanticretro@yahoogroups.com
Subject: [midatlanticretro] VCF East Address

Reply | Messages in this Topic (11)

#3290

From: "Evan Koblentz" <evan@...>
Date: Mon May 8, 2006 3:46 pm
Subject: RE: VCF East Address

evan947

Send Email

Doh! I guess I (and Andy and Joe) should have checked for other replies first.

From: Evan Koblentz [mailto:evan@...]
Sent: Monday, May 08, 2006 11:45 AM
To: midatlanticretro@yahoogroups.com
Subject: RE: [midatlanticretro] VCF East Address

2201 Marconi Road, Wall, NJ, 07719.

On some GPS systems it's listed at Belmar instead of Wall. (Belmar is a place name.)

Mapquest: http://tinyurl.com/zys47

Google Maps: http://tinyurl.com/hk8mn

A week or two ago we posted the long./lat. information here.

From: Jeremy Moskowitz [mailto:jeremym200@...]
Sent: Monday, May 08, 2006 9:00 AM
To: midatlanticretro@yahoogroups.com
Subject: [midatlanticretro] VCF East Address

Reply | Messages in this Topic (11)

#3291

From: "Evan Koblentz" <evan@...>
Date: Mon May 8, 2006 3:40 pm
Subject: RE: VCF Set-up & Tear Down Hours

evan947

Send Email

Friday -- from about 10 AM to about 10 PM.

Saturday -- 7:30 AM - 9:30 AM

The show officially opens at 9:30 on Saturday.

From: macmothership [mailto:macmothership@...]
Sent: Monday, May 08, 2006 7:05 AM
To: midatlanticretro@yahoogroups.com
Subject: [midatlanticretro] VCF Set-up & Tear Down Hours

Evan,
Could you post the set-up hours on Friday and also Saturday morning, as well as tear-down
hours after the show? Sorry if this has been already posted - I can't recall!

Reply | Messages in this Topic (2)

#3292

From: Bryan Pope <bryan.pope@...>
Date: Mon May 8, 2006 3:55 pm
Subject: Re: VCF East Address

b_ster42

Send Email

Evan Koblentz wrote:

Doh! I guess I (and Andy and Joe) should have checked for other replies first.

But for some reason it takes a *long* time for messages sent to get back to the list. I sent my response to this message at 9:20am but did not get the message into my inbox until 9:54am!

Cheers,

Bryan

P.S. This message is being sent at 11:55am

From: Evan Koblentz [mailto:evan@...]
Sent: Monday, May 08, 2006 11:45 AM
To: midatlanticretro@yahoogroups.com
Subject: RE: [midatlanticretro] VCF East Address

2201 Marconi Road, Wall, NJ, 07719.

On some GPS systems it's listed at Belmar instead of Wall. (Belmar is a place name.)

Mapquest: http://tinyurl.com/zys47

Google Maps: http://tinyurl.com/hk8mn

A week or two ago we posted the long./lat. information here.

From: Jeremy Moskowitz [mailto:jeremym200@...]
Sent: Monday, May 08, 2006 9:00 AM
To: midatlanticretro@yahoogroups.com
Subject: [midatlanticretro] VCF East Address

After 120 seconds of searching,
I could not find the exact
street address of InfoAge in Wall
on either the VCF site or the InfoAge
site.

Can someone please post the Mapquest-able
street address?

Thanks in advance.
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.392 / Virus Database: 268.5.5/333 - Release Date: 5/5/2006

Reply | Messages in this Topic (11)

#3293

From: "Evan Koblentz" <evan@...>
Date: Mon May 8, 2006 4:42 pm
Subject: RE: VCF East Address

evan947

Send Email

I know. And sometimes the list message appear on the web site but never reach our inboxes at all. It's a legitimate flaw in the Yahoo system.

When we started this early last year, Andy and I had a discussion about whether to use Yahoo Groups to use something homegrown or to use a typical list server. I supported Yahoo because it's basically maintenance-free and because it reaches the most people. I still feel that way.

From: Bryan Pope [mailto:bryan.pope@...]
Sent: Monday, May 08, 2006 11:55 AM
To: midatlanticretro@yahoogroups.com
Subject: Re: [midatlanticretro] VCF East Address

Evan Koblentz wrote:

Doh! I guess I (and Andy and Joe) should have checked for other replies first.

From: Evan Koblentz [mailto:evan@...]
Sent: Monday, May 08, 2006 11:45 AM
To: midatlanticretro@yahoogroups.com
Subject: RE: [midatlanticretro] VCF East Address

2201 Marconi Road, Wall, NJ, 07719.

On some GPS systems it's listed at Belmar instead of Wall. (Belmar is a place name.)

Mapquest: http://tinyurl.com/zys47

Google Maps: http://tinyurl.com/hk8mn

A week or two ago we posted the long./lat. information here.

From: Jeremy Moskowitz [mailto:jeremym200@...]
Sent: Monday, May 08, 2006 9:00 AM
To: midatlanticretro@yahoogroups.com
Subject: [midatlanticretro] VCF East Address

After 120 seconds of searching,
I could not find the exact
street address of InfoAge in Wall
on either the VCF site or the InfoAge
site.

Can someone please post the Mapquest-able
street address?

Thanks in advance.

Reply | Messages in this Topic (11)

#3294

From: Bryan Pope <bryan.pope@...>
Date: Mon May 8, 2006 5:09 pm
Subject: mailing list (was: VCF East Address)

b_ster42

Send Email

Evan Koblentz wrote:

I know. And sometimes the list message appear on the web site but never reach our inboxes at all. It's a legitimate flaw in the Yahoo system.

When we started this early last year, Andy and I had a discussion about whether to use Yahoo Groups to use something homegrown or to use a typical list server. I supported Yahoo because it's basically maintenance-free and because it reaches the most people. I still feel that way.

Have you thought of asking Jay West if he would let us run the email list from his commercial server? He has said many times that he would host any vintage computer related material for free on his servers.

Cheers,

Bryan

From: Bryan Pope [mailto:bryan.pope@...]
Sent: Monday, May 08, 2006 11:55 AM
To: midatlanticretro@yahoogroups.com
Subject: Re: [midatlanticretro] VCF East Address

Evan Koblentz wrote:

Doh! I guess I (and Andy and Joe) should have checked for other replies first.

But for some reason it takes a *long* time for messages sent to get back to the list. I sent my response to this message at 9:20am but did not get the message into my inbox until 9:54am!

Cheers,

Bryan

P.S. This message is being sent at 11:55am

Reply | Messages in this Topic (11)

#3295

From: "Evan Koblentz" <evan@...>
Date: Mon May 8, 2006 5:45 pm
Subject: RE: mailing list (was: VCF East Address)

evan947

Send Email

Hosting space isn't the issue. Having something easy for me to maintain is the issue.

LOL, but I regret bringing it up today. Let's table this until post-VCF .... please.

From: Bryan Pope [mailto:bryan.pope@...]
Sent: Monday, May 08, 2006 1:10 PM
To: midatlanticretro@yahoogroups.com
Subject: [midatlanticretro] mailing list (was: VCF East Address)

Evan Koblentz wrote:

I know. And sometimes the list message appear on the web site but never reach our inboxes at all. It's a legitimate flaw in the Yahoo system.

When we started this early last year, Andy and I had a discussion about whether to use Yahoo Groups to use something homegrown or to use a typical list server. I supported Yahoo because it's basically maintenance-free and because it reaches the most people. I still feel that way.

From: Bryan Pope [mailto:bryan.pope@...]
Sent: Monday, May 08, 2006 11:55 AM
To: midatlanticretro@yahoogroups.com
Subject: Re: [midatlanticretro] VCF East Address

Evan Koblentz wrote:

Doh! I guess I (and Andy and Joe) should have checked for other replies first.

But for some reason it takes a *long* time for messages sent to get back to the list. I sent my response to this message at 9:20am but did not get the message into my inbox until 9:54am!

Cheers,

Bryan

P.S. This message is being sent at 11:55am

Reply | Messages in this Topic (11)

#3296

From: "ysgdhio" <ysgdhio@...>
Date: Mon May 8, 2006 6:42 pm
Subject: Re: VCF East Address

ysgdhio

Send Email

--- Evan Koblentz wrote:
> Doh!  I guess I (and Andy and Joe) should have checked for other
replies first.

I think my reply was more complete. :-)

But isn't it better to have too many replies than none at all?

Andy

Reply | Messages in this Topic (11)

#3297

From: "billydaugustine" <azog@...>
Date: Mon May 8, 2006 7:58 pm
Subject: Free - Two Xerox 820-IIs

billydaugustine

Send Email

Need to make room, so I have two Xerox 820-IIs up for offers. You must
pick them up at my house in Woodbridge NJ.

The first one is the 820-II base, keyboard, and a 5.25" dual floppy
drive. This unit has been hacked, and it has a ribbon cable coming out
the back, "for some reason". I think it's for a parallel port of sorts.

The other is just the 820-II base and keyboard. No floppy drive.

You can find abundant info on the web, if you need specs, etc. Contact
me directly, please.

Reply | Messages in this Topic (2)

#3298

From: "Kelly Leavitt" <kelly@...>
Date: Mon May 8, 2006 8:11 pm
Subject: Re: Free - Two Xerox 820-IIs

w2lv

Send Email

I sent a private reply. I hope it went through.
Kelly

--- In midatlanticretro@yahoogroups.com, "billydaugustine" <azog@...>
wrote:
>
> Need to make room, so I have two Xerox 820-IIs up for offers. You must
> pick them up at my house in Woodbridge NJ.
>
> The first one is the 820-II base, keyboard, and a 5.25" dual floppy
> drive. This unit has been hacked, and it has a ribbon cable coming out
> the back, "for some reason". I think it's for a parallel port of
sorts.
>
> The other is just the 820-II base and keyboard. No floppy drive.
>
> You can find abundant info on the web, if you need specs, etc. Contact
> me directly, please.
>

Reply | Messages in this Topic (2)

#3299

From: Joe Giliberti <starbase89@...>
Date: Tue May 9, 2006 3:20 am
Subject: BST at VCF

jtkirk1337

Send Email

Are there going to be oppurtunities as far as buying, selling, and
trading go at VCF? I have a good deal of stuff I'd like to offload, and
don't want to bother w/ eBay.

Reply | Messages in this Topic (8)

#3300

From: "Evan Koblentz" <evan@...>
Date: Tue May 9, 2006 3:29 am
Subject: RE: BST at VCF

evan947

Send Email

Not formally. It's important to understand that VCF is an exhibition, not a swap meet. We'll probably do a real swap meet later this year.

Having said that, if you encounter any b/s/t opportunities, then do it * quietly * and I'll make sure I'm facing the other direction at that moment.

That goes for everyone.

From: Joe Giliberti [mailto:starbase89@...]
Sent: Monday, May 08, 2006 11:20 PM
To: midatlanticretro@yahoogroups.com
Subject: [midatlanticretro] BST at VCF

Are there going to be oppurtunities as far as buying, selling, and
trading go at VCF? I have a good deal of stuff I'd like to offload, and
don't want to bother w/ eBay.

Reply | Messages in this Topic (8)

#3301

From: "John Allain" <allain@...>
Date: Tue May 9, 2006 3:44 am
Subject: Re: BST at VCF

allain@...

Send Email

> We'll probably do a real swap meet later this year.

Sounds like something to really plan for.

> That goes for everyone.

Somebody forget to tell Sellam?
http://www.vintage.org/2006/east/vendor.php

Reply | Messages in this Topic (8)

#3302

From: "Evan Koblentz" <evan@...>
Date: Tue May 9, 2006 3:48 am
Subject: RE: BST at VCF

evan947

Send Email

That's just old boilerplate stuff.

The rule of thumb for exhibitors selling at VCF: officially, don't do it ... unofficially, "Shhh...!"

From: John Allain [mailto:allain@...]
Sent: Monday, May 08, 2006 11:45 PM
To: midatlanticretro@yahoogroups.com
Subject: Re: [midatlanticretro] BST at VCF

> We'll probably do a real swap meet later this year.

Sounds like something to really plan for.

> That goes for everyone.

Somebody forget to tell Sellam?
http://www.vintage.org/2006/east/vendor.php

Reply | Messages in this Topic (8)

#3303

From: "Bob Applegate" <bob@...>
Date: Tue May 9, 2006 11:52 am
Subject: Re: BST at VCF

bobk2ut

Send Email

Why not? This is the perfect opportunity to do some deals... many of the

die-hard vintage collectors are in one place, many having traveled considerable

distances. Trading/dealing will certainly create incentive for more people to

be there. Frankly, stating that all I can do is see old machines and not look

for good deals really distracts from the appeal of the whole event.

If the boilerplate is wrong, then ask to get it fixed. Basically we're advertised

incorrect information, and the first mention about it being wrong is posted to

a mailing list 4 days before the event?

Asking folks to travel back later in the year for a swap meet seems very

disorganized.

If MARCH does VCF next year, can we do a single event with a swap meet

at the same time? It makes perfect sense and is far more convenient for

everyone.

Bob

----- Original Message -----

From: Evan Koblentz

To: midatlanticretro@yahoogroups.com

Sent: Monday, May 08, 2006 11:48 PM

Subject: RE: [midatlanticretro] BST at VCF

That's just old boilerplate stuff.

The rule of thumb for exhibitors selling at VCF: officially, don't do it ... unofficially, "Shhh...!"

From: John Allain [mailto:allain@...]
Sent: Monday, May 08, 2006 11:45 PM
To: midatlanticretro@yahoogroups.com
Subject: Re: [midatlanticretro] BST at VCF

> We'll probably do a real swap meet later this year.

Sounds like something to really plan for.

> That goes for everyone.

Somebody forget to tell Sellam?
http://www.vintage.org/2006/east/vendor.php

Reply | Messages in this Topic (8)

#3304

From: "Evan Koblentz" <evan@...>
Date: Tue May 9, 2006 1:15 pm
Subject: RE: BST at VCF

evan947

Send Email

I'll definitely talk to Sellam about getting the boilerplate text changed.

I didn't mean to say people can not look for good deals, I only meant that it's primarily an exhibition and not a swap meet. That is the way VCF has traditionally been; it's not us saying it for the first time here. In the past there's also been a specific vendors area of the show, but this time we don't have the physical space for it.

Keep this in mind also -- attendees can look and ask for deals all they want -- what Sellam wants to prevent is big, blatant "for sale" signs in the main exhibits. Heck, I sold stuff in my own VCF exhibits in the past. The key is to keep the sales aspect from becoming dominant over the education / fun / exhibits aspect.

So, that's as best I can explain it: while VCFs in the past have had specific vendor areas, the main show has always been and continues to be an educational and fun exhibit, not a swap meet. This time we don't have a specific vendor area, so it would understandable if some dealing transpired in the "nudge nudge, wink wink" sense.

My initial idea for a fall swap meet is that it's a nice alternative for people who can't attend the big California show.

From: Bob Applegate [mailto:bob@...]
Sent: Tuesday, May 09, 2006 7:53 AM
To: midatlanticretro@yahoogroups.com
Subject: Re: [midatlanticretro] BST at VCF

Why not? This is the perfect opportunity to do some deals... many of the

die-hard vintage collectors are in one place, many having traveled considerable

distances. Trading/dealing will certainly create incentive for more people to

be there. Frankly, stating that all I can do is see old machines and not look

for good deals really distracts from the appeal of the whole event.

If the boilerplate is wrong, then ask to get it fixed. Basically we're advertised

incorrect information, and the first mention about it being wrong is posted to

a mailing list 4 days before the event?

Asking folks to travel back later in the year for a swap meet seems very

disorganized.

If MARCH does VCF next year, can we do a single event with a swap meet

at the same time? It makes perfect sense and is far more convenient for

everyone.

Bob

----- Original Message -----

From: Evan Koblentz

To: midatlanticretro@yahoogroups.com

Sent: Monday, May 08, 2006 11:48 PM

Subject: RE: [midatlanticretro] BST at VCF

That's just old boilerplate stuff.

The rule of thumb for exhibitors selling at VCF: officially, don't do it ... unofficially, "Shhh...!"

From: John Allain [mailto:allain@...]
Sent: Monday, May 08, 2006 11:45 PM
To: midatlanticretro@yahoogroups.com
Subject: Re: [midatlanticretro] BST at VCF

> We'll probably do a real swap meet later this year.

Sounds like something to really plan for.

> That goes for everyone.

Somebody forget to tell Sellam?
http://www.vintage.org/2006/east/vendor.php

Reply | Messages in this Topic (8)

#3305

From: "John Allain" <allain@...>
Date: Tue May 9, 2006 4:05 pm
Subject: Re: BST at VCF

allain@...

Send Email

> Why not?  This is the perfect opportunity to do some deals...

Well, there is more to "informal" trades than one might think.

VCF East 3.0 BBS > Trading Post    is here:
http://www.vintage.org/2006/east/bbs.php?directive=index:VCFEAST30:TRADE:0

I think the idea is to made your deal offline the show,
and perform the actual physical trade in the parkinglot.

John A.

Reply | Messages in this Topic (8)

#3306

From: "Evan Koblentz" <evan@...>
Date: Tue May 9, 2006 4:29 pm
Subject: RE: BST at VCF

evan947

Send Email

That sounds fine.

From: John Allain [mailto:allain@...]
Sent: Tuesday, May 09, 2006 12:05 PM
To: midatlanticretro@yahoogroups.com
Subject: Re: [midatlanticretro] BST at VCF

> Why not? This is the perfect opportunity to do some deals...

Well, there is more to "informal" trades than one might think.

VCF East 3.0 BBS > Trading Post is here:
http://www.vintage.org/2006/east/bbs.php?directive=index:VCFEAST30:TRADE:0

I think the idea is to made your deal offline the show,
and perform the actual physical trade in the parkinglot.

John A.

Reply | Messages in this Topic (8)

#3307

From: David Gesswein <djg@...>
Date: Thu May 11, 2006 3:19 am
Subject: Stuff available

dgesswein

Send Email

Is anybody interested (pickup at VCF preferred) (if you have PDP-8 stuff
    to trade all the better)

    IRMA 3278/3279 terminal emulation board for IBM PC/XT/AT in box.
    Mil-std 1553 ISA interface card
    Proxima Ovation LCD for overhead projector A822C.  Probably don't have
    power supply.

    If so email me off list.

Reply | Messages in this Topic (1)

#3308

From: "Evan Koblentz" <evan@...>
Date: Thu May 11, 2006 3:47 am
Subject: More fun down at InfoAge today

evan947

Send Email

We had another work meeting tonight.

Lots got done.  I worked on five projects: cleared the small parking area by
the loading ramp, cleared all the junk from the loading ramp itself, marked
the booths with tape on the floor, hung a large retracting screen from the
ceiling in the lecture room, and then cleared / cleaned the lecture room.

The booths and especially the aisles are closer together than I realized
when I designed the layout on paper.  Let's just say the aisles are tight!
LOL, so our show will appear to be crowded no matter what.  Also, this
morning we squeezed in an 18th exhibitor (actually a vendor) who specializes
in books and random things.

Speaking of vendors -- Carlson Stevens who is showing Japanese videogames is
also technically a vendor -- and our layout happens to have two booths alone
in one corner.  So we'll just these two booths together and call that corner
the vendor area.

Jim and Bryan: we'll have to put the MARCH club table in the lobby.  There
isn't any room left in the exhibits area.

Fred & Co. are doing more tomorrow.  Friday, I'm getting there by 8AM.  The
tables are supposed to arrive between 8-10AM.  I'll set them up and post
directional signs to guide exhibitors from the main entrance to the loading
ramp.  There's still plenty of cleaning to do, but some of the key InfoAge
people who are friends-of-MARCH (such as Steve from NJARC and Dan from the
historic diving club) will be around Friday to help us with whatever's
needed.

Reply | Messages in this Topic (2)

#3309

From: "Evan Koblentz" <evan@...>
Date: Thu May 11, 2006 4:07 am
Subject: RE: More fun down at InfoAge today

evan947

Send Email

>>> Jim and Bryan: we'll have to put the MARCH club table in the lobby. There isn't any room left in the exhibits area.

I take that back. The MARCH table will in the main area.

From: Evan Koblentz [mailto:evan@...]
Sent: Wednesday, May 10, 2006 11:48 PM
To: midatlanticretro@yahoogroups.com
Subject: [midatlanticretro] More fun down at InfoAge today

We had another work meeting tonight.

Lots got done. I worked on five projects: cleared the small parking area by
the loading ramp, cleared all the junk from the loading ramp itself, marked
the booths with tape on the floor, hung a large retracting screen from the
ceiling in the lecture room, and then cleared / cleaned the lecture room.

The booths and especially the aisles are closer together than I realized
when I designed the layout on paper. Let's just say the aisles are tight!
LOL, so our show will appear to be crowded no matter what. Also, this
morning we squeezed in an 18th exhibitor (actually a vendor) who specializes
in books and random things.

Speaking of vendors -- Carlson Stevens who is showing Japanese videogames is
also technically a vendor -- and our layout happens to have two booths alone
in one corner. So we'll just these two booths together and call that corner
the vendor area.

Jim and Bryan: we'll have to put the MARCH club table in the lobby. There
isn't any room left in the exhibits area.

Fred & Co. are doing more tomorrow. Friday, I'm getting there by 8AM. The
tables are supposed to arrive between 8-10AM. I'll set them up and post
directional signs to guide exhibitors from the main entrance to the loading
ramp. There's still plenty of cleaning to do, but some of the key InfoAge
people who are friends-of-MARCH (such as Steve from NJARC and Dan from the
historic diving club) will be around Friday to help us with whatever's
needed.

Reply | Messages in this Topic (2)

#3310

From: "Evan Koblentz" <evan@...>
Date: Thu May 11, 2006 5:49 am
Subject: Two things I'd like to sell

evan947

Send Email

Selling my Tandy Model 100 (in great condition, with extra memory and manual
and new battery) and my Tandy PC-1 (the handheld one based on the Sharp
PC-1211) in okay condition.

Anybody want them?  Make me an offer.

Reply | Messages in this Topic (1)

#3311

From: Joe Giliberti <starbase89@...>
Date: Thu May 11, 2006 1:55 pm
Subject: While Evan's at it, I'll try and sell some stuff too

jtkirk1337

Send Email

I will bring everything here to VCF on Saturday

IBM 4869 Disk Drives. Looking for $10 a piece. I have both the asterisk
and non-asterisk kind. Will bring to VCF
MCA Computone 8 port Serial Terminal Card w/ breakout box (Make Offer)
MCA Token Ring Card (Make Offer)
US Robotics Auto Link 212A Serial Modem w/ AC (Make Offer)
Microcom AX/9612c Serial modem w/ AC (Make Offer)
NIB Hayes Optima 24BData/Fax Internal 8-bit ISA Modem, w/ orignal
packaging, manuals, and software on both 5.25 and 3.5" disks. (Make Offer)
CMS External Disk Drive. Single DB-25 on back. No power connecter at all
(Make Offer)



OT Stufff:
Old Dell server, dual P2 300MHz, 256 RAM, 2.1GB HDD, Room for 5 more
HDDs. Looking for $50
Custom built AMD Sempron 64 2800+ system, Running XP Home and Linux,
512MB RAM, 80GB HDD, 16x DVD-R/W, Logitech Keyboard and Optical Mouse,
nVidia TNT2 M64 32MB AGP Video Card, 17" Compaq Monitor, Lexmark Z715
Color Printer ($400)

Joe

Reply | Messages in this Topic (6)

#3312

From: "macmothership" <macmothership@...>
Date: Thu May 11, 2006 2:32 pm
Subject: Buy/Sell/Trade Bandwagon Jumping

macmothership

Send Email

Ok, I'll jump on too. Please let me know if anyone needs any Apple hardware or
software. Full
systems or parts. If you need it, I probably have it, and I'll be happy to bring
it on Saturday!

-Jim

Reply | Messages in this Topic (10)

#3313

From: "Kelly Leavitt" <kelly@...>
Date: Thu May 11, 2006 2:45 pm
Subject: RE: Buy/Sell/Trade Bandwagon Jumping

w2lv

Send Email

Jim:
   I need the second floppy drive for an apple IIc. The old (original) style 5.25
drives. If you have any, please bring one. I can trade Tandy Juque or pictures
of dead presidents.

Kelly

	 -----Original Message-----
	 From: midatlanticretro@yahoogroups.com on behalf of macmothership
	 Sent: Thu 5/11/2006 10:32 AM
	 To: midatlanticretro@yahoogroups.com
	 Cc:
	 Subject: [midatlanticretro] Buy/Sell/Trade Bandwagon Jumping



	 Ok, I'll jump on too. Please let me know if anyone needs any Apple hardware or
software. Full
	 systems or parts. If you need it, I probably have it, and I'll be happy to
bring it on Saturday!

	 -Jim






	 ------------------------ Yahoo! Groups Sponsor --------------------~-->
	 Get to your groups with one click. Know instantly when new email arrives
	 http://us.click.yahoo.com/.7bhrC/MGxNAA/yQLSAA/S_NqlB/TM
	 --------------------------------------------------------------------~->


	 Yahoo! Groups Links

Reply | Messages in this Topic (10)

Yahoo! Groups

Breaking News Visit Yahoo! News for the latest.

The Yahoo! Groups Product Blog

Check it out!

Group Information

Yahoo! Groups Tips

Did you know...

Messages