I am looking for an MF 7 to give to my father for his 70th birthday. If anyone is interested in selling a working MF 7 (preferably with a working deck) that is...
There is one listed in a local ad in central lower MI, if this is close enough let me know and I will email you the ad... Clarence ... From: dchabot1 To:...
Mark & I were talking about this dozer. Never heard of any such "factory conversion" & I myself doubt that it is. Now I could be wrong, but it just doesn't...
I have a MF8 without engine and mounting plate for the engine. Does anyone have a picture of what I need to mount an engine? I'd appreciate any information, ...
I don't have a picture, but if you look at any website that sells tecumseh engines either the hm80 or hm100, you can look at a schematic of the engine plate...
The older (1968-76) mf7-10 had a welded in plate that was press formed.....IE flat where the motor sat and rolled down on the frame rail side and welded to the...
I had a 1974 MF8h, and the engine was mounted onto a plate, that plate was mounted to the frame plate with 2 bolts in back and one in front by the carb side,...
Jake, Thats what mine was, a plate mounted to the engine then it bolts to three rubber isolaters on the frame. I'd love to find a picture of the mounting plate...
... I just got outbid on the factory kit on E-bay. I bid up to $56 (in hinesight it was probably worth twice that), it had the original box, all parts {belt,...
Thanks to all who responded on my question about the ignition switch for my MF14. Jack's Small Engines had the OEM part in-stock for $13. The old gal is up and...
... You might be able to mount the engine without the plate, on my 8 with the plate, there are holes below the plate that allow the motor mount bolts to be...
I have one in north west Indiana-- close to South Bend. The tractor is in pretty good shape,, was repainted when I got it. Runs and mows, but the mower deck...
I have one in north west Indiana-- close to South Bend. The tractor is in pretty good shape,, was repainted when I got it. Runs and mows, but the mower deck...
On the 10-12 14 the engine was bolted directly to the frame. The first 8's were bolted to the frame too, but too many users complained about their feet and...
... a call if you haven't found one. It's a 4250 if I remember correctly, think I even have the book. Hasn't been used much, had the outside blasted and primed...
Hello from North Texas, I have a few old garden tractors but no M-F yet. That's why I need Yalls help. I have been offered a 1965 14 and know little about it....
... What do ... The price should be based on what you feel the unit is worth... I have seen the 14's go over a thousand, but with the mechanical issues, 4 to ...
Matt, If I could impose on you to send me a picture of the mounting plate I would sure appreciate it. I bought the tractor without an engine or mounting plate...
... The Briggs would be a good choice as I am having trouble with the Tec in my 8. I put a picture of the kit from ebay up in the photos section, it should be...
Hi everyone. I have a question about my mf-14. Im not a very good mechanic so I hope someone can help. The exhaust manifold gets very red when running....
Yes, she could be running lean, due to dirty carb, or anything slowing fuel getting to & through the carb. Or it could be that the points are in need of...
hi, could some help me out with a few problems that i'am having with my massey 10. 1. my ign switch will not shut the tractor off and may if i could find a...
Can Horold you please tell me what year this tractor was made. It is a recent Ebay pickup for parts, but might be good enough to restore. The cowl and decals...
hAD MF 10 WITH NO SPARK BEFORE . IT TURNED OUT TO BE THE MAGNETS ONTHE FLYWHEEL HAD CAME OFF THE BACK SIDE . BOUGHT EPOXY FROM AUTOZONE AND GLUE BACK IN PLACE...
Just got home with my first M-F 12hp tractor mower. Believe it to be a 1965 in remarkably good condition. The only cosmetic problem I see is the badly cracked...
i have a ignition unit that i think the spark comes from but if not please let me know, also i found the problem with the ign. switch, it has to bo grounded to...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
