... I have a feeling you are not aware of how the SS works. When you offload the step generation task to an off-board processor, none of this matters as long...
Do we need to go down that path ? Anyone wanting to use the smooth stepper over the PP is looking at getting the most out of a system and that system should...
Hi Eric, I think you should change the state of Dir LowActive value in motor setup in ports/pins. This will reverse the movement of the axis. Or go to the...
... Thanks Problem solved after reinstall Mario ... if its vista, right click DriverTest.exe and select "run as admin"..it will install the driver. ... 2) ......
Hi Art. the first code is giving software limits warnig ; after pressing continue machine complete the code with no problem. Second code is executed with no...
And THC. (:-) Jim www.soundlogicus.com ... From: mach1mach2cnc@yahoogroups.com [mailto:mach1mach2cnc@yahoogroups.com] On Behalf Of warp9td Sent: Wednesday,...
Greg - I have at the very least a very good understanding of the way the ss operates. And a fine appreciation. Let me refrase; "And NO, you absolutely *cannot...
I am now getting a new lathe for professionally producing stuff ie "round things". I am looking at the Chester Professional from the uk, 1390 british pounds. -...
Hi All Have been having good service from Mach3 for a long time, so much so that I have lost touch with the forums . . . . . . . A couple of weeks back, while...
Greg, Always happy to plug a good product! I'll try to new plug-in and see if that resolves the problems with my pendant. Regards, Ray L. ... of ... mode ... ...
Thanks for considering it Brian, No, the keys seem okay. Besides, the running will start without anything having been done on the keyboard prior. Typically...
Does it happen on any other program? Troy Thanks for considering it Brian, No, the keys seem okay. Besides, the running will start without anything having been...
... You want the frame ground (green wire on a US) from the PC to go as directly as possible to the same point as the power for your machine. Most electricians...
There is one particular program that seems more prone to this erratic behaviour, but that may be because it is one of the most repeated programs. I don't see...
I think we need to know what you have on your system.. For example do you have a shuttle pro??? I would take everything off that you don't need and test . ...
Only a standard USB-PS2 mouse and PS2 keyboard (the keyboard has spent maybe 7 years next to the dusty wood router). No network, sometimes a USB memory stick....
Well in my case it was G51 X-2 as I'm in diameter mode and touching off is in the negative. That was a little confusing but it seems to be a workable solution....
Hi guys, Sorry for being a bit off topic but I thought that there's proably quite few C11 owners here. I got a board sometime in August but had problems with...
Greg, Tried the new plug-in. Sorry to report it was not so good. I can't say for sure it had any effect on the pendant operation - if anything it was worse....
Had a customer in today and the discussion on the advantages of the closed loop Taig controller was obviously covered, but Nigel came up with a simple question...
I have been using c10-c1 and c6 (and 3)cards for about 1-2 years and am a very happy customer. Arturo support and customer care has always been first rate. A...
