... It always took greater than 5 - only the help text was 'wrong' ;) -- Lester Caine - G8HFL ... Contact - http://lsces.co.uk/lsces/wiki/?page=contact ...
... Jog clear first. There is no "perfect" Home sequence in all situations. It is up to the operator to make sure the tool is in a safe position to home from. ...
I am trying to make a script that will tell me when certain numbers have been met in the maintenance house page. How do I access these values in script? -Adam...
The two mains ones I think are Rogers (I usually remember the name wrong but it's at www.rogersmachine.net <http://www.rogersmachine.net/> ) kit which ...
When running a program I have the feedrate plus 100% but it drops back to 100% at what seems random time intervals. the last prog i ran was a circle groove...
hello, Go to Operator / Edit button script and click on the Reff button (should be flashing when you press on it ). Then change the order of the commands that...
Thanks Lee, I understand what you mean, but there is no change after setting the save Z. X axes is still the first. Am I doing something wrong?? Thanks, Tom...
... Absolutely agree with you. That is why I'm asking how to do this, because I have specific situation. ... Of course not. The lathe, I'm diong it right now...
... Brian, I tryed this, but Reff All button does not flashing. With Screen4 I tryed to change the OEM Code function 211 by selecting VB Script function edited...
Hi Paul, I spend this weekend with Screen4 on Vista. I created my new screen and everything goes fine. There are some difficulties if you open Edit, View or ...
I'll do that. Two more question please. I made a new screen with Screen4, but Elapsed time DRO stops counting after few seconds. If Pause button is pressed,...
I read a post on the TaigTools group where a guy recommended 10, so that's where I started. The machine sounds GREAT now, so I'm calling it 'fixed'.... I was...
when homing should it hit the switch and then back of till the switch opens backup? Thanks Donald Clifton E-mail message checked by Spyware Doctor (5.5.1.322) ...
Thanks, Is there a way to give Z a value after it backs off? I have tried setting to offset but that does nothing? Thanks for the help Donald Clifton ... From:...
Dont be afraid of simple questions, most people here are very helpfull Al ________________________________ From: ronkathyhess <ronkathyhess@...> To:...
I read through their spec sheet and watched the video. I wish I had them on 3 of my earlier builds. The mounting options would have saved me the trouble of...
I'm not sure which ones your referring to, but most the cheap encoders are Hewlett Packard, or derivatives there of. Generally they are good encoders, there...
The home offset should do that, under homing/limits. It will go to home then enter that value in the DRO, unless you have G100 in which case it moves off by...
I tried that and it didn't work. I'll try it again. Thanks Donald Clifton ... From: mach1mach2cnc@yahoogroups.com [mailto:mach1mach2cnc@yahoogroups.com]On...
It did work, I was tring to do it to a slaved axis and it doesn't show up that way. I was just going to make a touch plate for the Z axis. Thanks Donald...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
