Hi all, Use a DC power supply with a current limiter to protect the ESC during test runs. Batteries are hardly current limited ;-) and may fry up the ESC if...
646
Peter Stuy
pstuy@...
Jun 2, 2002 4:22 am
G'day, Could anybody explain to me the different EFFECT of hooking the winding on a CD motor in star or delta? Different revs or torque? Cheers, Peter ...
647
Peter Stuy
pstuy@...
Jun 2, 2002 9:22 am
G'day, Anybody know where to order something like the Homier 7x12 lathe outside the USA? Homier do not send abroad and I would need 220/240 Volt, 50Hz anyway....
Hi all, This week end I flight tested my LRK 350-20-13 (built using some Torcman parts and other done in my lathe), installed in my old messy Astro Hog; the ...
... Congratulions Roberto! A very good result, especially when considering that the motor is installed in an airframe designed for IC motors. Did you use 10 or...
Hi Ron, I used 14 magnets, 20mm. long and 13x(2xo.80) windings. ... Da: ron_van_sommeren [mailto:ron.van.sommeren@...] Inviato: lunedi 3 giugno 2002...
... The Astro Hog looks nice. Can you post some close ups of the motor and the controller? Met vriendelijke groet ;-) Ron van Sommeren Nijmegen, the...
... winding on a CD motor in star or delta? ... star : lower revs, more torque, lower current delta : higher revs, less torque, higher current A thread that...
... outside the USA? ... Peter, you could try and ask these newsgroups: news:uk.rec.models.engineering news:alt.mechanical.engineering Met vriendelijke groet...
... outside the USA? ... A search for 'homier' AND 'lathe' in www.google.com gave resulted in 84 hits. Maybe you can find information there. Met vriendelijke...
Peter Herless Machinery in Australia have lathe in their catalogue which looks idetical to the Homier 7x12 lathe. The market it as Iron Hand brand and model no...
658
Peter Stuy
pstuy@...
Jun 4, 2002 7:18 am
G'day John, Thanks for the advice, but I feel stupid: Can't find that CH-350 anywhere on their page. Do you know what it costs? Cheers, Peter Stuy...
Interesting site on small lathes at http://www.mini-lathe.com/ Would you believe it this is the site linked from the http://www.homier.com/ site anyway. He...
Peter Yes your right the lathe is not on their web site but Herless have a printed catalogue and it is in that, the price isn't shown but it would be worth a...
661
lrk-torquemax@yahoogr...
Jun 5, 2002 4:35 am
This lrk-torquemax mailing-list help message is sent-out every month. LIST ARCHIVE / SEARCH ... All messages can be viewed online and are *public*. The list's...
Is it possible to purchase a kit of the necessary parts to build the LRK350-20-13? Can someone point me in the right direction. I think I would like to build...
... www.torcman.de www.flyware.de www.aero-model.com is the USA Flyware distributor but they don't have lrk's on their site yet. Met vriendelijke groet ;-) Ron...
... Hi Wade, Motor parameters see at: http://www.torcman.de/eco/tm350-20-future45bo.gif on http://www.torcman.de/eco/Motoren_Daten.html for specific rotation...
Hi all I have just assambled a home made LRK motors - but unfortunately have I made the air space between the magnets and the strator to small (or the...
667
peter_rother@...
Jun 7, 2002 6:54 am
Hi most of known LRK345 are running with nominal 0.5mm air gap. Smaller air gap of 0.3mm gave worse performance (inductive currents in magnet material) as...
Hi all, I just found on "www.bunting-magnetics.com/magnets/neodymium.cfm" size acceptable for LRK aplication: 10.1x5.1x2.5 mm (0.4"x0.2"x0.1") price is...
Hi at all, finally, my LRK working..... I'm very happy ! This is the essentials: 28 mm dia. stator 15 mm lenght stator 12 turn (1 wire of 1.3 mm dia) 6 NiCa...
Hi all, Just a quick reminder. The 'radiomodelvliegclub' Cumulus will be hosting her 11th e-fly-in in combination with the 2nd lrk-meeting on Sunday, June...
