hi I have seen that in the area files there is an article on lrk with all the 12 wound teeth, unfortunately I don't know the German. Could someone explain me...
Hi Matteo, simply put one half of your regular turns on each tooth, winding- direction as shown in the picture. The major-advantage is, that you need less wire...
I'm considering making a can for my magnets by putting them on a foam or wood form, then wrapping them with either fiberglass or carbon fiber and epoxy to make...
... From: olaf_lampe To: lrk-torquemax@yahoogroups.com Sent: Thursday, May 01, 2003 11:22 AM Subject: [lrk] Re: all 12 teeth wound Hi Matteo, simply put one...
Don't think it will do much for the magentic circuit as you have no back iron. Thickness of backiron is important. Regards Peter ... From: Dave Strout To:...
Your magnets need to be on an iron ring, but it is possible to make the rest of the housing from carbon fibre. I had a similar idea but decided that balancing...
Hi all, A "open source" do-it-yourself brushless controller, several members of the www.rcline.de forum cooperate in taking the hardware, software and pcb...
1867
lrk-torquemax@yahoogr...
May 1, 2003 11:40 pm
This lrk-torquemax mailing-list help message is sent out every month and upon subscription. CONTENTS ... * LIST ARCHIVE & SEARCH * MESSAGE DELIVERY OPTIONS *...
I go to: http://www.elektro-motor.net/ > Producte ... Der Flyware Drehzahlsteller ist ein Qualitätsprodukt Made in Germany. Er eignet sich für sensorlose...
Hello Herbert, ... I told to Flyware on the Intermodellbau - the controllers won't be on sale yet. Try the phone +49 7723/91035 -- Gruß Daniel Rinninsland...
... Easier than you might think with a tool or two.. A Top Flite magnetic balancer from a hobby shop for $15 or so should be enough for most small or medium...
... I have noticed also that it is much easier to fit the copper inside by winding every pole. Yesterday, I wound Torcman 350-28 stator by using 7 turns / pole...
Would ring magnets need a ring yet behind them? My first attempt was going to be using two of the stators with heavy guage wire and two of the ring magnets...
Very nice things. A little bid difficult but be patient and try to find out all(!) pictures and circuits. http://www.cityfujisawa.ne.jp/~iijima-p/ Have good...
A very interesting site indeed - just wish Google could translate Japanese-> English. He seems to pretty much organised with equipment and test gear.... Mark ...
Hi, this was christmas and birthday at once!! My pal at work gave me a drivemotor of an ordinary Kyocera Laserprinter. I opened it easyly and found this...
Wonder why www.torcman.de wasn´t linked? Also found an interesting link of a Neodym-Magnet manufacturer. Some cheap quadral magnets on stock. greetings Olaf...
I have been reading and re-reading the thread on ezonemag.com. And finally tore into an old 50X cdrom. I have the motor extracted. But...Then end of the bell...
Hi Olaf, The max temperature of the http://www.neodymium.de/ magnets is 80degrees celsius. ... I stopped adding links there, I put them in the FAQ document...
Hi all, From the http://www.neodymium.de/ site, a funny and instructive neodymium magnet demo, 342kByte: www.neodymium.de/abstossung1.wmv Met vriendelijke...
Hi Ray The bell holding the magnets should be a steel grey cup pressed on to the shaft. It should pull off. The bit the cd rests on should also pull off the ...
Its true Ron, the stock-available magnets are 80°C types. But under the "Nix gefunden?"-link they offer N30-N48 strong types with 80° or 150°C temp-range. ...
If the motor is more eff then you have less heat I think. So any weight to a point to innprove eff is not wasted maybbe. And if heat makes a motor less eff...
Thanks, The translation is very "interesting", But, at least it does enough translation to get an idea of what it is all about. Mark ... From: Darcy H Currey ...
Hello All, I've finally started construction of my LRK. It is to be a standard LRK. (12 tooth stator, 14 magnets) The stator will be 38.3mm DIA and the...
Hi @ll, lets say i have a conventionell winded LRK with 2x0,5mm parallelwired/20 turns. Is it possible to split the windings on 2 neighbour-tooth ? Each ...
Hi again, i´d like to use the original-bell from a Laserprinter-drivemotor, but therefor the neodym-magnets need to be approx. 3,5mm thick. Would it work, if...
Dear Olaf, splitting is possible. 10 windings each tooth. The effeciency might be a little bit better. If it is an very short motor, it will be more effective...
