Dear Ron, that looks good. A large number of poles / magnets to obtain a low speed motor. My biggest problem is how to get the stator plates. 24 / 65 mm is...
In all the literature I've read most AC motors are designed to operate at up to 400hz. At 400 Hz they use special steels and higher still 1500+ move to other...
Are you sure you're not confusing 'drive' frequency with PWM frequency ? Standard AC motors(syncronous) and BLDC are quite different beasts... /Kenny...
Hi Kenny, Thanks, but no I don't mean on the drive side. I'm just talking about the frequency in Hz created by the PM motor or generatior and what has been...
Hi, Joe. Any bad effects are all due to hysteresis, as far as I know. Thinner laminations and higher resistivity materials (metallic glasses, for instance, ...
That is because 400 Hz is the highest powerline grid frequency used. That is the simple explanation. Some people will say, they only know of 50 or 60 Hz grids,...
They use 400 hertz in alot of surplus military applications such as radar drive motors and other drives .All there generators are 400 hertz. Carl ... From: Joe...
Dear, I thank lrk-torquemax@yahoogroups.com add me. I am Brazilian descendant of Italian, a specialist in the design of mechanisms and this year I am...
I going to make a exterior rotor brushless DC motor, with 16 poles and 36 slots, airgap 0,6422 mm, diameter outside stator of 172 mm and diameter inner rotor...
Goedendag, There are several ways to suspend and resume e-mail reception from this group. 1- via e-mail Suspend: Send empty message, no subject to: ...
... That would resume e-mail reception in non-digest format. To resume in original format, send a message to lrk-torquemax-mail@yahoogroups.com Vriendelijke...
Hi Herbert, (I will try here on the group :-) I need to make a decision for ordering some Litze wires. Their standard Litze (1 strand) are : 0,02; 0,022;...
OK, but I am new in project of electric brushless. How many watts for my brushless DC motors with 12 poles and 36 slots? And, tickness of magnet to width...
The number of poles and slots doesn't really effect the power of the motor. Typically the volume of the motor and the speed defines how much power it would...
Dear Ryan, ok, I'm a Brazilian government agency in providing services, so cost is no problem. What I do not understand is that for 36 slots and 16 imams,...
... It is common to have 3 slots for each magnet Pole, but it doesn't necessarily mean less cogging torque. ... I don't quite understand everything you stated....
I would like to understand the following: (to exterior rotor, 3-phase) a brushless motor with 12 slots, 8 magnets, would be the fractional calculus that...
I have about 2000 N45H (120 Celcius) Epoxy coated 10x5x2.5mm magnets magnetized through thickness (2.5mm). I was wondering if anyone was interested in buying...
Ok But, I don´t understand with are make this: Notes regarding the notation used: Uppercase (A, B or C) = clock-wise winding (CW) Lowercase (a, b or c) =...
Dear, Ryan I refer to a person who can solve this on! Opportunity to send a drawing on an example in the case of a three-phase motor with 36 slots and 12...
Goedendag, ... Right from the start of this group, I had attachments disabled, to prevent viruses from spreading via the group. If you want to share pictures...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
